• Advanced Composite Materials
• /
• 제16권4호
• /
• pp.377-384
• /
• 2007

'Green' composites were fabricated from poly lactic acid (PLA) and bamboo fibers by using a conventional hot pressing method. The insulating properties of the PLA-bamboo fiber 'green' composites were evaluated by determination of the thermal conductivity, which was measured using a hot-wire method. The thermal conductivity values were compared with theoretical estimations. It was demonstrated that thermal conductivity of PLA-bamboo fiber 'green' composites is smaller than that of conventional composites, such as glass fiber reinforced plastics (GFRPs) and carbon fiber reinforced plastics (CFRPs). The thermal conductivity of PLA-bamboo fiber 'green' composites was significantly influenced by their density, and was in fair agreement with theoretical predictions based on Russell's model. The PLA-bamboo fiber composites have low thermal conductivity comparable with that of woods.

• Journal of the Korean Wood Science and Technology
• /
• 제47권3호
• /
• pp.336-343
• /
• 2019

Effects of a novel mold inhibitor specifically for bamboo, on the properties of composite products have been confirmed in this study. The mechanical and dimensional stability properties of bamboo fiber-based composites (BFBCs) from different bamboo species were also investigated. The results showed that Burmanica Gamble possessed the highest values of modulus of elasticity (MOE) of 33.2 GPa, modulus of rupture (MOR) of 286.9 MPa, compressive strength of 182.6 MPa and shear strength of 24.0 MPa. By contrast, Phyllostochys heterocycla among all of species showed the lowest MOE of 16.3 GPa, MOR of 170.3 MPa and compressive strength of 128.9 MPa were the lowest among all of species. Moreover, there is a remarkable variation in the swelling and water absorption between the samples with 4 h and 28 h water immersion treatment, especially Phyllostachys iridenscens. Overall, the results suggested that TCIT (Tebuconazole and 3(2H)-isothiazolone) had no significant effect on the mechanical properties compared with the control condition, and it would be utilized as an antimould of BFBCs manufacturing.

• 공업화학
• /
• 제29권2호
• /
• pp.168-175
• /
• 2018

본 논문에서는 대나무 섬유(BF)의 화학처리가 BF 및 폴리프로필렌(PP)/대나무섬유(BF) 복합체의 물성에 미치는 영향을 고찰하기 위해, 알칼리 처리 전후의 BF에 대해 ${\gamma}$-aminopropyltriethoxysilane (APS), ${\gamma}$-glycidoxypropyl-trimethoxysilane (GPS) 그리고 ${\gamma}$-mercaptopropyltrimethoxysilane (MRPS)을 이용하여 실란 상용화제를 처리하였다. BF의 화학처리에 따른 형태학적 특성은 광학현미경(OM)과 주사전자현미경(SEM)을 통해 확인하였으며, 화학 구조의 변화는 FT-IR과 EDS를 통해 확인하였다. 실란처리 시 BF의 열안정성이 증가함을 TGA를 통해 확인하였다. 실란 처리한 PP/BF 복합체의 굴곡강도와 충격특성이 개선되는 것을 만능시험기(UTM)와 충격강도시험기(Izod impact test)를 통해 확인하였고, PP/BF 계면 접착특성이 개선되는 것을 인장시험 후 시편의 파단면을 SEM 사진을 통해 확인하였다.

• Composites Research
• /
• 제35권6호
• /
• pp.456-462
• /
• 2022

천연섬유는 가연성이 높아 난연화가 쉽지않으며, 친환경적인 특성을 활용하기 위해서는 친환경적으로 난연화시키는 것이 필요하다. 본 연구에서는 자연으로부터 유래한 난연 후보물질인 Phytic acid, APTES, Thiourea를 기반으로 하는 액상 난연제를 제조하고 대나무 섬유의 난연처리 및 난연성 평가를 통하여 그 성능을 입증하고자 하였다. 액상 난연제를 사용할 경우 대량의 천연섬유에 대한 난연처리가 가능하다. 다구찌 시험계획법에 따라 9종류의 난연처리된 대나무 섬유를 준비하였다. 그후 난연성 평가를 위하여 수직 연소시험 및 마이크로칼로리미터 시험을 수행하였으며, SEM을 이용하여 난연처리 전후의 천연섬유 표면을 비교하였다. 시험결과 Phytic acid가 천연섬유의 난연성 향상에 매우 큰 효과가 있음을 알 수 있었으며 미세구조 분석을 통하여 난연제가 천연섬유 표면에 균일하게 부착되는데 도움을 주는 것을 알 수 있었다. 이와 같은 연구성과를 활용할 경우 대량의 천연섬유를 친환경적인 방법으로 고난연화 하는 것이 가능하여 시제품 적용에 유리할 것으로 기대된다.

• Journal of the Korean Wood Science and Technology
• /
• 제46권4호
• /
• pp.355-361
• /
• 2018

In this study, the dimensional stability and mechanical properties of bamboo fiber-based composites (BFBCs) were studied at two pressing manufacturing processes, i.e., hot- and cold- pressing, and were compared with three density parameters (1.0, 1.1, and $1.2kg/m^3$). Width swelling ratio (WSR), thickness swelling ratio (TSR), and water absorption ratio (WAR) were calculated for water immersions of 4 and 28 h. WSR, TSR, and WAR for specimens immersed for 28 h were higher than those for 4 h treatment, which shows that the immersion time has a significant influence on the dimensional stabilities of BFBCs. Moreover, the positive linear relations between density and dimensional were observed at both the pressing ways, indicating that the WSR, TSR, and WAR decreased with an increase in the density of BFBCs. The compressive strength, shear strength, modulus of rupture (MOR), and modulus of elasticity (MOE) were determined. The compressive strength, MOR, and MOE of hot-pressed specimens were significantly higher than those for the cold-pressed specimens, which are also directly proportional to density. Moreover, the samples with the highest density of $1.2kg/m^3$ performed high values on mechanical properties in both the manufacturing methods.