• 한국세라믹학회지
• /
• 제32권3호
• /
• pp.366-370
• /
• 1995

The ballistic efficiency of alumina tiles with various sizes, shapes, and target configurations was measured by the thick backing plate technique. The ballistic efficiency of square tiles roughly 8 mm thick struck by 12.7mm diameter bullets rapidly increased with tile size up to about 100mm, then tended to saturate. Circular shape tiles had lower ballistic efficiencies than those of square shape tiles for the same width and thickness. Small tiles (50mm) that were recessed in aluminum wells had a significantly higher ballistic efficiency than tiles placed on a flat surface. However, the difference in the ballistic efficiency between the two target configurtions became small at larger tile sizes. All the results could be explained by the effect of reflected waves at edges and the propagation of resulting cracks on the penetration process.

• Composites Research
• /
• 제18권6호
• /
• pp.48-53
• /
• 2005

본 연구에서는 방탄물성이 매우 우수한 알루미나-실리카계 방탄재료(PL-8)의 방탄물성을 향상시키기 위해 성형압력 및 소결온도를 변화시켰다. 물리/기계적 물성을 측정 한 후 성형작약(HEAT)/운동에너지(KE)탄에 대한 방탄물성을 측정하여 분석하였다. 그 결과 소결온도 $1235^{\circ}C$에서 성형작약탄에 대한 방탄물성이 가장 높았으며 기 개발된 알루미나-실리카계 방탄재료 (PL-8)에 비해 $22\%$ 방탄물성이 향상되었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2005년도 창립60주년 기념 추계 학술대회
• /
• pp.92.2-92.2
• /
• 2005

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제9권1호
• /
• pp.55-60
• /
• 2009

The channel backscattering coefficient and injection velocity have been extracted experimentally in 65nm MOSFETs. Thanks to an experimental extraction methodology taking into account multi-subband population, we demonstrate that the short channel ballistic efficiency is slightly greater than long channel ballistic efficiency.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2006년 제4회 한국유체공학학술대회 논문집
• /
• pp.231-234
• /
• 2006

See Full Text

• International journal of advanced smart convergence
• /
• 제12권2호
• /
• pp.117-126
• /
• 2023

To improve the overall performance and realism of your game, it is important to calculate the trajectory of a projectile accurately and quickly. One way to increase realism is to use a ballistic model that takes into account factors such as air resistance, density, and wind when calculating a projectile's trajectory. However, the more these factors are taken into account, the more computationally time-consuming and expensive it becomes, creating a trade-off between overall performance and efficiency. Therefore, we present an optimal solution to find a balance between ballistic model accuracy and computation time. We perform ballistic calculations using numerical methods such as Euler, Velocity Verlet, RK2, RK4, and Akima interpolation, and measure and compare the computation time, memory usage (RSS, Resident Set Size), and accuracy of each method. We show developers how to implement more accurate and efficient ballistic models and help them choose the right computational method for their numerical applications.

• Composites Research
• /
• 제18권6호
• /
• pp.40-47
• /
• 2005

본 연구에서는 세라믹 방탄재료개발을 위해 가장 경제적이고 방탄물성이 높은 알루미나를 기본으로 하여 압축-팽창률이 높은 실리카를 첨가하여 방탄물성이 우수한 세라믹 방탄재료를 개발하고자 하였다. 3가지 조성을 선정하였으며 각각 조성에 적합한 소결온도를 설정하였다. 물리/기계적 물성을 측정한 후 K215 자탄을 기폭시켜 성형 작약(HEAT)탄에 대한 방탄물성을 측정하였으며, 30mm 고체추진포에서 10.7의 L/D비를 갖는 팅스텐 긴 관통자를 비행시켜 운동에너지(KE)탄에 대한 방탄물성을 측정하여 분석하였다. 그 결과 $46\%\;Al_2O_3\;-\;51\%\;SiO_2$가 가장 높은 방탄물성을 나타내었으며 알루미나에 비해 매우 우수한 방탄재료로 평가되었다.

• 한국세라믹학회지
• /
• 제29권4호
• /
• pp.312-318
• /
• 1992

Two kinds of alumina specimens with different grain size (1 and 51 $\mu\textrm{m}$) but same density were prepared by hot-pressing. Fracture strength and fracture toughness of these specimens at low strain rate, sonic velocity, and elastic property were evaluated. Ballistic performance against Cal. 50 AP projectile was characterized by thick-backing method by using A16061-T6 reference block. Mechanical properties measured at low strain rate showed that the specimen with samll grain (SG) were better than specimen with large grain (LG). Fracture strength and fracture toughness of LG specimen were 131 MPa and 3.01 MPa{{{{ SQRT { m} }}, but those of SG specimen were 349 and 4.23, respectively. Sonic velocity and elastic properties of these specimen were similar, but bulk velocity and bulk modulus were different at amount of 4 and 9%. The tendency of ballistic performance was not consistent with the mechnaical properties at low strain rate. The ballistic performance based on quantitative efficiency revealed that the LG specimen (5.13) was ballistically better than the SG specimen (4.00) in spite of their lower mechanical properties.

• The Korean Journal of Ceramics
• /
• 제5권3호
• /
• pp.270-277
• /
• 1999

The ballistic capability of an alumina-rich oxide armor ceramic against a shaped jet was characterized as a function of penetration depth in a layered target structure. The penetration resistance of the ceramic, based upon the determination of penetration velocity, was not equally realized throughout the depth of penetration. It was abnormally low at an early stage of penetration, followed by a sudden increase to reach ~16GPa thereafter. There was no apparent change in such a profile with respect to the lateral size of the specimen. Based upon 2-D flash x-ray radiography and 3-D Hull code simulation, the feasibility of forming a pressure-induced predamnaged zone in front of the jet tip was speculated to foster an increased penetration velocity in the initial stage penetration, resulting in the diminished penetration resistance. The disappearance of such a predamaged zone with penetration was interpreted to restore the resistance of the ceramic in the later penetration stage.

• 한국군사과학기술학회지
• /
• 제10권2호
• /
• pp.31-37
• /
• 2007

This paper presents a ballistic lead-computation method which utilizes automatic video tracking, tracking assistance and roll uncoupling. The method is able to improve the firing accuracy of army fighting vehicles such as main battle tanks. In the experiment, the efficiency of the proposed method is evaluated by an error analysis in real operating environment. The proposed method has been applied to the fire control system of a military vehicle and proved through the development test of the vehicle.