• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.9
• /
• pp.2326-2337
• /
• 2013

Many applications can be parallelized by using multicore platforms. We propose a load-balancing technique for parallelizing a whole application, whose first module (H.264) has data independency and whose second module (AES) has data dependency. Instead of distributing the first module symmetrically over the multi-core platform, we distribute the data-independent workload asymmetrically in order to start the data-dependent workload as early as possible. Based on the experimental results with a compression/encryption application, we confirm that the asymmetric load balancing can provide better performance than the typical symmetric load balancing.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.5 s.176
• /
• pp.1155-1165
• /
• 2000

Due to the irregularity of walking ground and the inaccuracy in trajectory control of a leg, the mechanical shock and slip on the ground can be caused in the landing and supporting legs of a walkin g robot, and the robot may lose walking stability. Especially in a jointed-leg type walking robot, those problems are much more severe than in the pantograph type since the leg-weight of the jointed-leg type walking robot is relatively heavier than that of the pantograph type in general. In order to secure the walking stability for the jointed-leg type quadrupedal robot under development in KIST(Korea Institute of Science and Technology), a balancing algorithm consisting of the leg compliance control and the body posture control is implemented in this paper, and the effectiveness of the algorithm is verified through experiments.

• Proceedings of the KIEE Conference
• /
• 2007.04a
• /
• pp.255-257
• /
• 2007

In this paper, we develop a single wheeled robot that has one wheel to move. The single wheel robot is similar to a rolling disk relying on gyroscopic motions to balance. The Gyrobo consists of three actuators: a spin motor, a tilt motor and a drive motor. The spin motor spins a flywheel at high rate so that it provides the balancing stability to upright the robot. The tilt motor controls steering of the robot by gyroscopic effect. The drive motor make forward accelerated motion to the robot. We have built and tested the Gyrobo to turn and move forward.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1293-1296
• /
• 1997

We investigate a design methodology for master arm which is employed in remote-site control. Though counter-balancing has been employed for the purpose of lessening the actuator loads, it results in the increase of dynamic load at the task position. Therefore, there exist a trade-off between counter-balacing and dynamic performance. The concept of a composite index is introduced to simulataneously consider those two effects in the design of master arms. Several alternative designs of master arms are suggested.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.15-18
• /
• 2000

We developed a human-sized BWR(biped walking robot) driven by a new actuator based on the ball screw which has high strength and high gear ratio. The robot overcomes the limit of the driving torque of conventional BWRs. Each leg of the robot is composed of three pitch joints and one roll joint. In all, a 10 degree-of-freedom robot with two balancing joints was developed. The BWR was developed to walk autonomously such that it is actuated by small torque motors and is boarded with DC battery and controllers. In the performance test, the BWR performed nice motions of sitting-up and sitting-down. Through the test, we could find capability of high performance in biped-walking.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.7
• /
• pp.713-717
• /
• 2014

In this paper, the travel control of the spherical wheeled robot with a mecanum wheel is impelemented. Four typical wheels or three omni wheels are used to consist of the ball-bot. the slip is occured when the typical wheels is used to the ball-bot. In order to reduce these slip, the spherical wheeled robot with macanum wheels is proposed. Through some experiments, we find that the proposed spherical wheeled robot with a mecanum wheel is superior to the conventional spherical wheeled robot with typical wheels.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.267-267
• /
• 2000

We developed a human-sized BWR(biped walking robot) driven by a new actuator based on the ball screw which has high strength and high gear ratio. The robot overcomes the limit of the driving torque of conventional BWRs. Each leg of the robot is composed of three pitch joints and one roll joint. In all, a 10 degree-of-freedom robot with two balancing joints was developed. The BWR was developed to walk autonomously such that it is actuated by small torque motors and is boarded with DC battery and controllers. In the performance test, the BWR peformed nice motions of sitting-up and sitting-down. Through the test, we could find capability of high performance in biped-walking.

• KEPCO Journal on Electric Power and Energy
• /
• v.2 no.4
• /
• pp.609-613
• /
• 2016

A hybrid charging method with serial and parallel architecture has been developed to resolve the unbalanced charge problem among battery cells for Electric Vehicles. In this method, the major charging is performed with serial part and the balancing is carried out with the parallel part, where the serial part is big and heavy but the parallel part is smaller and lighter than serial part. A sensor array to detect the individual battery cell voltage, duty rate control incorporated IGBTs, and battery management system are employed as the core parts of the proposed system.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.4
• /
• pp.210-217
• /
• 2014

This paper presents experimental studies on controlling one-wheel robot, GYROBO. The previous one has the problem of falling down because the inside gimbal leans against one direction to make it balancing. This structural problem has been solved by redesigning the system. Gains obtained through experimental tasks are used as a gain scheduling method so that GYROBO is more stabilized. A line trajectory following control task is performed to test the driving control as well.

• Journal of Institute of Control, Robotics and Systems
• /
• v.7 no.5
• /
• pp.420-426
• /
• 2001

In this paper, we introduce a case study of developing a miniature humanoid robot that has 16 degrees of freedom and is able to perform statically stable walking. The developed humanoid robot is 37cm tall and weighs 1,200g. RC servo motors are used as actuators. The robot can walk forward and turn to any direction on an even surface. It equipped with a small digital camera, so it can transmit vision data to a remote host computer via wireless modem. The robot can be operated in two modes: One is a remote-controlled mode, in which the robot behaves according to the command given by a human operator through the user-interface program running on a remote host computer, the other is a stand-alone mode, in which the robot behaves autonomously according the pre-programmed strategy. The user-interface program also contains a robot graphic simulator that is used to produce and verify the robot\`s gait motion. In our walking algorithm, the ankle joint is mainly used for balancing the robot. The experimental results shows that the developed robot can perform statically stable walking on an even surface.