• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제48권2호
• /
• pp.83-88
• /
• 1999

Series connection of power semiconductor devices is selected in high voltage and high power applications. It is important to prevent the overvoltage from being induced across a device above ratings by the proper voltage balancing in the field of IGBT series connection. In addition, the overvoltage induced by a stray inductance has to be limited in the high power circuit. This paper proposes a new gate control scheme which can balance the voltage properly and limit the overshoot by controlling the slope of collector voltage under the turn-off transient in the series connected IGBTs. The proposed gate control scheme changes the slope of collector voltage by sensing the collector voltage and controlling the gate signal actively. The new series connected IGBT gate driver is made and its validity is verified by the experimental results for series connected IGBT circuit.

• 한국산업융합학회 논문집
• /
• 제23권1호
• /
• pp.49-55
• /
• 2020

This paper presents the system modeling, analysis, and controller design and implementation with a inverted pendulum system in order to test Linear Quadratic control based robust algorithm for inverted pendulum robot. The balancing of an inverted pendulum robot by moving pendulum robot like as 'segway' along a horizontal track is a classic problem in the area of control. This paper will describe two methods to swing a pendulum attached to a cart from an initial downwards position to an upright position and maintain that state. The results of real experiment show that the proposed control system has superior performance for following a reference command at certain initial conditions.

• Journal of Communications and Networks
• /
• 제4권2호
• /
• pp.118-127
• /
• 2002

This paper proposes a new scheme - parallel control scheme with feedback control (PCFC) for ABR services in ATM networks. The information from a source is split into a number of streams, for delivery over separate parallel connections with particular coding. At the receiver, the original information is reconstructed by the received packet from the parallel connections. The effects of PCFC on the network performance are due to two factors: Traffic splitting and load balancing. By combinations of analysis and simulation, this paper studies the implications of PCFC for how the ABR parameters should be scaled and the advantages of PCFC compared with other existing schemes.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제6권1호
• /
• pp.52-57
• /
• 2006

In this paper, we have proposed a new adaptive fuzzy control algorithm based on Takagi-Sugeno fuzzy model. The regulation problem for the uncertain SISO nonlinear system is solved by the proposed algorithm. Using the advanced stability theory, the stability of the state, the control gain and the parameter approximation error is proved. Unlike the existing feedback linearization based methods, the proposed algorithm can guarantee the global stability in the presence of the singularity in the inverse dynamics of the plant. The performance of the proposed algorithm is demonstrated through the problem of balancing and swing-up of an inverted pendulum on a cart.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1998년도 제13차 학술회의논문집
• /
• pp.201-204
• /
• 1998

This paper presents a new construction method of candidate controllers using Multi-modal Neural Network(MNN). To improve a control performance of multiple controller, we construct, candidate controllers which consist of MNN. MNN can learn more complicated function than multilayer neural network. MNN consists of preprocessing module and neural network module. The preprocessing module transforms input signals into spectra which are used as input of the following neural network module. We apply the proposed method to multiple control system which controls the cart-pole balancing system and show the effectiveness of the proposed method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부A
• /
• pp.156-158
• /
• 1998

This paper presents parallel operation of two 3-phase PWM converters whose Power and control schemes can be directly applied to a large capacity system. This paper describes power circuit, dc voltage regulation, input power factor correction and balancing load control of two converters. Switching device Is IGBT and CPU of control is 32-bit floating point DSP for real time instantaneous control. Simulations and experimental results for 20kw model conform the validity of proposed schemes.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부A
• /
• pp.195-197
• /
• 1998

The large scale industry needs high voltage converters. Therefore series connection of power semiconductor devices is necessary. It is important to prevent a device induced the overvoltage above ratings by proper voltage balancing in the field of IGBT series connection. In addition, the overvoltage induced by a stray inductance has to be limited in the high power circuit. This paper proposes a new gate control scheme which can balance the voltage properly and limit the overshoot by control the slope of collector voltage under series connected IGBT turn-off transient. The propose gate control scheme limits the overvoltage by sensing the collector voltage and controlling the gate signal actively. The new series connected IGBT gate driver is made and its validity is verified by the experimental results for series connected IGBT circuit.

• 융합보안논문지
• /
• 제18권3호
• /
• pp.3-9
• /
• 2018

DDPG(Deep Deterministic Policy Gradient)알고리즘은 인공신경망과 강화학습을 사용하여 학습하는 알고리즘이다. 최근 많은 연구가 이루어지고 있는 강화학습과 관련된 연구 중에서도 DDPG 알고리즘은 오프폴리시로 학습하기 때문에 잘못된 행동이 누적되어 학습에 영향을 미치는 경우를 방지하는 장점이 있다. 본 연구에서는 DDPG 알고리즘을 응용하여 자전거를 자율주행 하도록 제어하는 실험을 진행하였다. 다양한 환경을 설정하여 시뮬레이션을 진행하였고 실험을 통해서 사용된 방법이 시뮬레이션 상에서 안정적으로 동작함을 보였다.

• 전기전자학회논문지
• /
• 제25권1호
• /
• pp.148-155
• /
• 2021

로봇 기술이 발전함에 따라 모바일 로봇의 주행 시스템에 대한 연구가 활발히 진행되고 있다. 2륜 및 4륜의 휠을 기반으로 구성되는 모바일 로봇의 주행 시스템은 직선과 같은 단반향 주행에 장점이 있으나 방향 전환 및 제자리 회전에 단점을 가지고 있다. 볼을 휠로 사용하는 볼 로봇은 전방향 이동에 장점이 있으나, 구조적인 불안정한 특성에 의해 균형을 유지하기 위한 자세 제어 및 이동을 위한 주행 제어가 요구된다. 기존의 볼 로봇은 모터에 부착된 엔코더를 이용하여 주행제어를 위한 위치를 추정함으로써 오차가 누적되는 한계를 가지고 있다. 본 연구에서는 영상처리를 통해 볼 로봇의 위치 좌표를 추정하고, 이를 주행 제어에 사용하는 주행 제어 시스템을 제안하였다. 볼 로봇의 위치를 추정하기 위한 영상처리부, 통신부, 표시부 및 제어부를 포함하는 볼 로봇의 주행 제어 시스템을 설계 및 제작하고, 주행 제어 시스템을 적용한 볼 로봇의 주행 실험을 통해 x축 방향 ±50.3mm 및 y축 방향 ±53.9mm의 오차범위 이내에서 오차의 누적 없이 제어됨을 확인하였다.

• 제어로봇시스템학회논문지
• /
• 제19권1호
• /
• pp.1-9
• /
• 2013

This paper presents a new control algorithm for dynamic control of a unicycle robot. The unicycle robot motion consists of a pitch that is controlled by an in-wheel motor and a roll that is controlled by a reaction wheel pendulum. The unicycle robot doesn't have any actuator for a yaw axis control, which makes the derivation of the dynamics relatively simple. The Euler-Lagrange equation is applied to derive the dynamic equations of the unicycle robot to implement the dynamic speed control of the unicycle robot. To achieve the real time speed control of the unicycle robot, the sliding mode control and LQ regulator are utilized to guarantee the stability while maintaining the desired speed tracking performance. In the roll controller, the sigmoid-function based sliding mode controller has been adopted to minimize the chattering by the switching function. The LQR controller has been implemented for the pitch control to drive the unicycle robot to follow the desired velocity trajectory in real time using the state variables of pitch angle, angular velocity, angle and angular velocity of the wheel. The control performance of the two control systems form a single dynamic model has been demonstrated by the real experiments.