• 한국게임학회 논문지
• /
• 제7권3호
• /
• pp.23-30
• /
• 2007

게임 밸런스는 게임 디자인의 매우 중요한 요소이며, 게임을 좀 더 재미있게 구성하기 위한 필수 요소이다. 대부분의 게임 개발사들은 성공적인 게임 개발을 위하여 자체적인 밸런스 방법을 사용한다. 효율적인 밸런스 방법이 항상 성공적인 게임 개발을 보장할 수는 없으나 게임 개발자의 입장에서 효율적인 게임 개발을 위하여 표준적인 밸런스 방법이 필요한 것이 사실이다. 캐릭터간의 전투 시스템은 주로 액션을 포함한 장르에서 구현된다. 캐릭터간의 전투를 위한 직접적인 밸런스 요소는 각 캐릭터들이 가지게 되는 특성 및 공격 형태들이다. 본 논문에서 우리는 캐릭터간의 대전 시스템을 갖는 게임에서 캐릭터와 관련된 직접적인 밸런스 요소를 구분하고 이에 근간한 수학적 밸런스 방법을 제안한다.

• Journal of Nutrition and Health
• /
• 제1권1호
• /
• pp.33-36
• /
• 1968

Amounts of heat production determined by two indirect calorimetric methods, i.e., respiration-calorimetric method and body balance method were compared. In this report the apparatus, its operation and computation procedures for Haldane respiration-calorimetry modified by Han as well as procedures for body balance method are described. It was found that the heat production measured by two methods are similar.

• 한국정밀공학회지
• /
• 제10권4호
• /
• pp.109-117
• /
• 1993

Force balance method is employed to predict forging information such as forging load, tool pressure and normal stress at the surface of tangential velocity discontinuity. The incipient stages of deformation for the plane strain forging of rectangular billets in V-shaped dies of different semi-angles are analysed. To construct an approximate model for the analysis of deformation by the force balance method in the incipient deformation stages, slip-line field is used. When the deformation mode by slip-line method is the same as that by force balance method, the slip-line method and the force balance method give identical solutions. The effects of die angle, coefficient of friction, billet geometries and deforma- tion characteristics are also investigated. In order to verify the validity of force balance analysis, the rigid-plastic finite element simulation for the various forgig parameters are performed and performed and find to be in good agreement.

• 한국항공우주학회지
• /
• 제38권12호
• /
• pp.1153-1161
• /
• 2010

본 연구에서는 주기적 비정상 유동 해석을 위해 푸리에 변환을 이용하는 조화 균형법의 효율적인 해법을 제안한다. 내재적으로 유속항을 처리하고 외재적으로 조화 원천항을 처리하였다. 외재적 조화 균형법 보다 더 빠르게 수렴 시킬 수 있으며 내재적 조화 균형법을 적용할 때 추가되는 자코비안 행렬을 처리할 필요가 없다. 또한 완전 내재적 기법에 상응하는 수준의 수렴안정성을 확인할 수 있었다. 2차원 비정상 유동 문제로 피칭하는 NACA0012 익형에 적용하였으며 이중 시간 적분법 및 외재적 Runge-Kutta기법의 해와 매우 일치하는 결과를 얻었다.

• Korean Journal of Hydrosciences
• /
• 제8권
• /
• pp.97-110
• /
• 1997

Quantifying water balance components is crucial to understanding the basic hydrology and hydrochemistry. An importance of water balace studies has been emphasized from the need to grasp the actual condition of water resources and environmental changes including climatic changes. This paper proposes a method for evaluating water balance components based on the vegetation monitor using remote sensing data. Here, the evapotranspiration model adopts a direct method by using NDVI(Normalized Difference Vegetation Index) calculated from NOAA/AVHRR data and a detailed descriptionof water balance by using the evapotranspiration over the Korean Peninsula. In the study, areal distribution data sets of water balance components are produced using NDVI and a simplified water balance model. This method enables one to discuss the hydrological problems for North Korea where insufficient meteorological and hydrological data exist. The results obtained indicate the specific regional features on water inventory and fluctuation in water balance.

• 한국초전도ㆍ저온공학회논문지
• /
• 제18권3호
• /
• pp.25-29
• /
• 2016

A quench detection system of KSTAR Poloidal Field (PF) coils is inevitable for stable operation because normal zone generates overheating during quench occurrence. Recently, new voltage quench detection method, combination of Central Difference Averaging (CDA) and Mutual Inductance Compensation (MIK) for compensating mutual inductive voltage more effectively than conventional voltage detection method, has been suggested and studied. For better performance of mutual induction cancellation by adjacent coils of CDA+MIK method for KSTAR coil system, balance coefficients of CDA must be estimated and adjusted preferentially. In this paper, the balance coefficients of CDA for KSTAR PF coils were numerically estimated. The estimated result was adopted and tested by using simulation. The CDA method adopting balance coefficients effectively eliminated mutual inductive voltage, and also it is expected to improve performance of CDA+MIK method for quench detection of KSTAR PF coils.

• 한국전산유체공학회지
• /
• 제15권4호
• /
• pp.76-84
• /
• 2010

In order to analyze the periodic unsteady flow problem efficiently the partially implicit harmonic balance (PIHB) method was developed. Contrary to the existing harmonic balance method, this method handles the harmonic source term explicitly and deals with flux terms implicitly. This method has a good convergence in comparison with the full explicit harmonic method and it is easy to apply this method because there is no need to calculate the complicated flux Jacobian term by comparing with the full implicit harmonic method. With the multigrid method about the each harmonic it turns out that this method has a good convergence regardless of the number of harmonics. The oscillating flows over NACA0012 airfoil is considered to verify this method then the result correponsed to both the result of dual time stepping and explicit Runge-Kutta method.

• 대한물리치료과학회지
• /
• 제15권2호
• /
• pp.79-86
• /
• 2008

Background: The purpose of this study was to present a practical method of medical treatment to improve the balance and motor ability of the mentally retarded child with a single mentally retarded child-subject. Methods: The subject of the study was a 39-month-old mentally retarded female. This study included a 2-week basic period and a 13-week treatment period. The treatment method was based on the Bobath Approach. Gross motor function measurement (GMFM) was used to examine changes in motor ability, and the Pediatric Balance Scale (PBS) was used to measure changes in balance ability. The curative program was composed of normalization of muscle tone, strengthening of leg endurance and muscular strength, the improvement of trunk alignment, and the increase of balance. Visual rate of change was used to examine the results. Results: As a result of this study, balance ability increased on the Pediatric Balance Scale (PBS) by 24 points, and motor function increased in terms of Gross Motor Function Measurement (GMFM) by 6.9% (18 points). Standing increased by 41% (16 points), and walking, running, and jumping increased by 31.9% (23 points) compared to thebasic period. Therefore, the Bobath Approach appears to be an appropriate method to improve balance and motor ability in mentally retarded children. Conclusion: It is surmised that aggressive intervention by physical therapists and occupational therapists, and a follow-up study, are required for the growth of motor ability in mentally retarded children.

• 동의생리병리학회지
• /
• 제23권4호
• /
• pp.908-913
• /
• 2009

This study was conducted to investigate the influence that it has on the application pre and post balance index using method with spiral and reaction point balance taping application against 20 stroke patients. The taping application pre and post static eye opening balance index was statistically no significant difference in the Mean X Speed, and the Extent in X Dirction but in the Mean Y Speed, the Velocity Moment, and Extent in Y Direction, there were statistically significant difference(p<0.05). The taping application pre and post static eye closing balance inde was statistically no significant difference in the Mean X Speed, in Y Direction, there were statistically significant difference(p<0.05). From above results, the method of the applied taping was the equilibrium stability performance of the Y-axis than the stability of the balance of the X-axis, therefore it is considered to study the taping application method in the balance of detail stroke patients.

• 산업공학
• /
• 제17권spc호
• /
• pp.79-89
• /
• 2004

Supply Chain (SC) can balance demands with supply activities as executing Supply Chain Planning (SCP). The fluctuated demands, however, will break the balance between demand and supply. It means that the present SCP is useless in responding the changed demands. Thus it is necessary for SCP to be updated with changed demands. We call this procedure as Supply Chain Replanning. However, the existing measures for SC can not deal with the balance between supply and demand so that they can not detect effectively the timing of replanning. For this reason, a new performance measure, Balancing Point, is developed using momentum, a concept of Physics. It can treat the balance between supply and demand. Also, a replanning method based on Balancing Point is proposed. The proposed method is more effective than the existing replanning method, periodic replanning method and net inventory method.