• Title/Summary/Keyword: bag method

Search Result 415, Processing Time 0.029 seconds

Silk Reelability of the Cocoon Stored in a Pelyethylene Bag (Polyethylene대 저견이 조사에 미치는 영향)

  • 최병희;송기언
    • Journal of Sericultural and Entomological Science
    • /
    • v.6
    • /
    • pp.31-33
    • /
    • 1966
  • This work has been carried out for many months to check whether polyethylene bag cocoon storging method bring better reeling result against the normal cotton bag storing method. The obtained results were as followings. 1. The pupa killed cocoons could be stored on the ground in case of packing in polyethylene-bag until the secondary dry process. 2. The raw silk percentage of cocoon stored in polyethylene bag, increased 0.5% than the cotton bag storing method, not because of its reelability, but because of the better yield of cocoon bave. 3. Musty cocoon was not shown during the polyethylene hag storage, but the cocoons were attacked by rats as usually. 4. Polyethylene bag storing method invited more insects attack than the normal method, but the attack was able to cease by enclosing two naphthalene tablets in each bag.

  • PDF

Study on the Anchovy Boat Seine-IV An Experiment to Mechanize the Hauling Operation of Bag Net (기선권현 강의 연구 -IV)

  • 이병기
    • Journal of the Korean Society of Fisheries and Ocean Technology
    • /
    • v.15 no.2
    • /
    • pp.95-100
    • /
    • 1979
  • In fishing with the anchovy boat seine, it is required to haul up the bag net without injuring anchovy body. Not to injure anchovy body, the bag net is operated with 30 to 34 crews in the traditional method. With a view point of decreasing crews, the authors tried to operate the bag net with side drum winch and derrick boom. Side drum winch was installed beside the engine casing and it was operated by the main engine through the belt, pulley and bevel gear. The derrick boom, 7 meters long, was installed above the working deck which is located in the stern of the common boat seiner. Three single blocks are attached to the boom, each 2 meters apart from the top. A hook was attached to the free end of the block line for hooking up the bolch line which attached inside the bag net especially prepared for the purpose. The hauling end of the block line was induced to the side drum winch for hauling up the bag net. By using this mechanism, the bag net was hauled up with peeling the bag net just like in the traditional method. So the following results are found. (1) No injury of anchovy body was found in the process of hauling up. (2) The bag net can be operated by mere 14 crews. (3) Duration, spent in hauling up the bag net, was almost the same when the catch are a little amount, and less duration was needed by the experimented method than the traditional one when the catch are a large amount. the bag net. By using this mechanism, the bag net was hauled up with peeling the bag net just like in the traditional method. So the following results are found. (1) No injury of anchovy body was found in the process of hauling up. (2) The bag net can be operated by mere 14 crews. (3) Duration, spent in hauling up the bag net, was almost the same when the catch are a little amount, and less duration was needed by the experimented method than the traditional one when the catch are a large amount.

  • PDF

Studies on the Relining Method of Kenaf bark and Manufacture if bag using KENAF(Hibiscus Cannabinus. L) Produced in KOREA (한국산 양마 섬유의 정련방법과 마대가공에 관한 연구)

  • 이성갑
    • Journal of the Korean Professional Engineers Association
    • /
    • v.10 no.3
    • /
    • pp.17-26
    • /
    • 1977
  • In order to obtain the most practical and economically efficient method for refining of kenaf fiber and the production possibility of bag dproucts by using kenaf, Various chemicals and conditions of treatment for refining of kenaf bark were examined. Refining by the retting method was found much beneficial in quality of fiber and in processing cost than the chemical mettled. Bag products by using kenaf bark has good quality , and for practical use, Even if the production cost is slightly more expensive than jute bag, it could be reduced by planned mass production.

  • PDF

Control of relative humidity in the static bag emission test method by adding water and its effect on formaldehyde emission intensity (백을 이용한 정적 방출시험 방법에서 수분공급을 통한 상대습도조절과 포름알데하이드의 방출강도에 미치는 영향)

  • Park, Cheol-Soon;Yoo, Ji-Ho;Kim, Man-Goo
    • Analytical Science and Technology
    • /
    • v.24 no.4
    • /
    • pp.282-289
    • /
    • 2011
  • Rapid screening method for the determination of the emissions of pollutants from vehicle interior parts and materials have been developed as ISO 12219-2 which is using bag and based on a static condition. The method was not controlled humidity in the test bag, so it is not suitable test method for formaldehyde emission test which is highly related to humidity condition. In this study, possibility of control humidity in the static test bag by adding extra water and the effect of humidity condition for formaldehyde emissions have been investigated. The relative humidity in the test bag was affected not only amount of water added also material of test bag and test specimen. The emission intensity of formaldehyde was increased according to increasing relative humidity in test bag. But excessively supplied water was condensed on the inner surface of test bag and surface of sample specimen that were sorption formaldehyde and were reduced its emission intensity.

Intelligent Dust Chamber Bag Control System using Case-Based Reasoning (사례기반 추론을 이용한 지능형 집진기 bag 제어 시스템)

  • Kim, Jung-Sook
    • Journal of the Korean Institute of Intelligent Systems
    • /
    • v.20 no.1
    • /
    • pp.48-53
    • /
    • 2010
  • In this paper, we develop the intelligent remote dust chamber bag control system which is combination of the advanced IT and traditional dust chamber based on event. At first, the message format is defined for the efficient dust chamber bag information transmission using power line communication. Also, we define the data types to logically model the dust chamber and the dust chamber bag, and they are logically modeled using XML and object-oriented modeling method. In addition to, we apply the case-based reasoning for showing the dust chamber bag exchange time intelligently to user at real-time using casebase, that is collected by case or case-based reasoning result, and that is described using XML.

The Effects of Bag Weight and Carrying Bag Position on Vastus Medialis Oblique and Vastus Lateralis Muscle Activity Ratio during Step up in Healthy Adult (계단오르기 동안 가방의 무게와 가방메기 형태가 안쪽빗넓은근과 가쪽넓은근의 근활성도비에 미치는 영향)

  • Cho, Hyunrae
    • Journal of The Korean Society of Integrative Medicine
    • /
    • v.2 no.3
    • /
    • pp.49-55
    • /
    • 2014
  • Purpose : The purpose of this study was to investigate the effect of cross bag weight and carrying bag position type on vastus medialis oblique and vastus lateralis muscle activity ratio during step up. Method : Twenty healthy subjects participated in this study. subjects randomized performed step up with bag weight less than 15%, more than 15% of totalbody weight and without bag and carrying bag position ipsilateral and contralateral. muscle activity was measured with surface electromyography. One-way analysis of variance with repeated measures was used with a significance level of 0.05 Result : The results of this study were as follows: 1. The muscle activity ratio decreased significantly ipsilateral bag position more than 15% of body weight(p<.05). Also, the muscle activity ratio increased significantly contra lateral bag position more than 15% of body weight(p<.05). Conclusion : In conclusion, it was found that applied carrying bag position with weight on VMO,VL muscle activity ratio during step up down. Therefore carrying bag position can be used to selective activate vastus medialis oblique muscle in subjects with patellofemoral pain syndrome.

Comparison of Bag Weight and Applied Location on Plantar Pressure and Gait in the Twenties Student

  • Jinho Yu;Jaecheol Park;Mingyun Ko
    • Physical Therapy Rehabilitation Science
    • /
    • v.12 no.2
    • /
    • pp.155-160
    • /
    • 2023
  • Objective: The purpose of this study is to confirm a comparison of bag weight and applied location change on plantar pressure and gait parameters (stride time, stride length, cadence) of the 20s students. Design: One group cross-sectional design Methods: The subjects were measured in each condition. Each condition was no carrying a bag, carrying a 3kg bag, and a 6kg bag on the right shoulder, and walked on the gait analyzer. After the location of the bag was changed, measured when a 3kg backpack and a 6kg backpack was each carried on the back while walking. Results: There was a statistically significant difference in plantar pressure according to bag weight when carried on the right shoulder (p<0.05). As a result of the post-hoc analysis, carrying a 6kg bag was a significant difference between no carrying a bag and carrying a 3kg bag (p<0.05). There was no statistically significant difference in changes in stride time, stride length, and cadence. There was no statistically significant difference in plantar pressure and gait parameters according to backpack weight. Conclusions: As a result of this study, it is thought that it will be possible to present a method for the application of the correct bag on location and weight in 20s students, and to prevent and reduce muscle musculoskeletal system diseases caused by incorrect bag wearing.

Evaluation for Loss Rate of Carbon Dioxide by Sample Storage Method (시료 보관 방법에 따른 이산화탄소 시료의 유실율 평가)

  • Cho, Chang-Sang;Lee, See-Hyung;Lim, Ki-Kyo;Yoo, Jung-Hwa;Sa, Jae-Hwan;Jeon, Byung-Gwan;Jeon, Eui-Chan
    • Journal of Climate Change Research
    • /
    • v.2 no.4
    • /
    • pp.309-316
    • /
    • 2011
  • The study evaluated the loss rate of carbon dioxide, which is the prevalent greenhouse gas, according to the method of keeping specimens using standard gases. In order to examine the difference generated by a bag of storing specimens, it checked the loss rate according to concentration and time by making a 2nd set of standard gases in a Tedlar bag and an Aluminium bag. The containers lost gases at a rate of 5% or more after 6 day, and 10% or more after 15 days in both bags. In time, it was confirmed that the loss rate of the Aluminium bag was higher than that of the Tedlar bag. Specifically, there was no significant difference between the two bags after 12 days had passed, but by the 15th day, it was confirmed that the loss in an Aluminium bag was more severe than that in the Tedlar bag. The study went on to check the relations between the humidity in storage and the loss rate. The results showed that there was no significant effect of humidity on the loss rate until 72 hours had passed, when the loss rate in the Tedlar bag with high humidity was about 5% higher than that of the Tedlar bag in dry conditions. This study examined the loss rate of carbon dioxide, a typical greenhouse gas. It is important to note that the loss rate was determined by calculating highly reliable carbon dioxide emission and emission coefficient data, with consideration to the method of keeping specimens.

Development of a Remote Dust Collector Bag Control System using Power Line Communication (전력선 통신을 이용한 원격 집진기 bag 제어 시스템 개발)

  • Kim, Jung-Sook
    • Journal of the Korea Society of Computer and Information
    • /
    • v.15 no.4
    • /
    • pp.91-98
    • /
    • 2010
  • Advances in communications and control technology, the strengthening of the Internet, and the growing recognition of the urgency to reduce the risk and production cost are motivating the development of improvements in the traditional manufacturing industry. In this paper, we developed a remote dust collector bag control system which is a combination of advanced IT and traditional dust collector based on the event. At first, we made the A/D(Analog/Digital) converter using a micro processor because the differential pressure transmission, which is a sensor of the dust collector, produces analog volt data. A/D converter can provide RS-232 communication to connect with Power Line Communication(PLC) modem. And, n-bytes message format was defined for the efficient dust collector bag information transmission from a dust collector to a user. Also, we designed the data types to model the dust collector and the dust collector bag, and they were logically modeled using XML and object-oriented modeling method. In addition to that, we implemented the system for showing the dust collector bag exchange time exactly to users at real-time using various visual user interfaces.

A Study on Bag Purchase Behaviors according to Materialism Value (물질주의 가치에 따른 가방 구매행동 연구)

  • Lee, Mi-sook
    • Journal of the Korea Fashion and Costume Design Association
    • /
    • v.24 no.3
    • /
    • pp.33-48
    • /
    • 2022
  • This study aimed to investigate bag purchase behaviors according to materialism value. The subjects were 443 male and female adult consumers in their 20s to 50s. The research method was a survey, and the questionnaire consisted of questions on materialism value, bag purchase behaviors, and demographic characteristics. For data analysis, descriptive statistics, Cronbach's α, χ2 test, factor analysis, cluster analysis, ANOVA, and Duncan's multiple range test were performed. The results of this study were as follows. First, materialism value was derived from three factors (happiness pursuit, possession-oriented, and success judgment). Second, subjects could be divided into three groups (happiness pursuit group, success judgment pursuit group, and immaterialism group) based on the materialism value variable. Third, the derived groups showed many differences in bag purchase behaviors. The happiness pursuit group considered all bag evaluation criteria factors (practicality, aesthetics, economy, symbolism) and bag purchasing information sources factors (mass media and personal sources) more than other groups, and showed a tendency to prefer select shops and complex shopping malls as bag purchasing places. In addition, the average annual cost and frequency of purchasing bags of this group were higher than those of other groups. The success judgment pursuit group considered symbolism as a bag evaluation criteria more than other groups, and considered personal sources as bag purchasing information sources more than mass media sources, and preferred luxury stores and department stores as bag purchasing places. On the other hand, the immaterialism group considered practicality and aesthetics as bag evaluation criteria and placed less importance on all information sources than other groups, and preferred Internet shopping malls as purchasing places. This group had the lowest average annual purchase cost and frequency among the three consumer groups. This study suggested that materialism value is a useful variable to segment male and female adult consumer markets effectively, and to understand the bag purchase behaviors of consumer groups divided by materialism value.