• Korean Journal of Applied Biomechanics
• /
• v.31 no.4
• /
• pp.283-289
• /
• 2021

Objective: The aim of this study was to analyze the pattern of Kolman technique by five Korean top gymnasts including the three national athletes on horizontal bar. Method: Two digital high-speed camcorders were used with 90 frames/sec and their Kolman motions were filmed in sports science secondary school gymnasium at U city. After the kinematic and kinetic variables were carried out by Kwon3D 3.1 motion package during the whole phase, the optimized release motion was investigated by simulating the body COG path during the aerial phase. Results: Firstly, it was revealed that the average changes of hip, shoulder joint angle were 84 deg, 53 deg respectively during the functional sub-phase and the average swing phaseal time was 1.21 s. Secondly, it was revealed that the average body COG positions and velocities (Y, Z) at release were -0.65 m, 0.48 m, 1.65 m/s, 3.97 m/s respectively and the average release angle, peak height and flight time were 67 deg, 1.29 m, 0.79 s respectively. Thirdly, it was revealed that the directions of somersault of whole and lower body, tilt of lower body were counterclockwise, whereas the directions of tilt of whole body, twist of whole and lower body were clockwise at the ready for re-grasp. Lastly, it was revealed that the body COG paths were different from each other during the aerial phase followed by the different body COG velocities. Conclusion: Korean gymnasts of this study controlled their motions well in terms of the timing of hip·shoulder joint, body position, body angular momentum especially during the functional sub-phase, but their motions were different during the aerial phase. Nonetheless most of them made the adequate body position at the instant of re-grasp. It would be suggested that Korean gymnasts except S3 should increase the vertical velocity.

• Journal of the Korea Convergence Society
• /
• v.12 no.12
• /
• pp.365-370
• /
• 2021

The current study aims to investigate the relationship between working memory capacity, vocabulary size, and listening competence of Korean EFL (English as a Foreign Language) learners. 30 English education majors from a university in Korea were recruited. The backward digit span and the operation span tasks were used to measure the participants' working memory capacity, while the Listening Vocabulary Level Test (LVLT) and the Michigan English Test (MET) were employed to measure their vocabulary size and listening proficiency in English, respectively. The correlational analyses revealed that the bigger one's working memory storage was, the better the person processed incoming input. However, no statistically significant correlation was found between working memory capacity, English vocabulary size, and listening proficiency, possibly due to the small sample size and the homogeneous subjects.

• Journal of Korean Academy of Nursing
• /
• v.51 no.5
• /
• pp.617-629
• /
• 2021

Purpose: The aim of this study was to examine the validity and reliability of the Korean version of the self-efficacy for managing chronic disease 6-item scale (SECD-6-K). Methods: The English version of the Self-Efficacy for Managing Chronic Disease 6-item Scale first underwent forward and backward translation procedures. The SECD-6-K was then used to collect data from 350 adults diagnosed with chronic diseases. Content, construct, convergent, discriminant, and criterion validity were all evaluated. Reliability was assessed using Cronbach's α. SPSS 25.0 and the data were analyzed using AMOS 26.0 software. Results: The SECD-6-K consists of six items in two domains: disease management and health behavior. The results for construct, convergent, and discriminant validity were good. Exploratory factor analysis produced eigen values between 2.27 and 3.28, with factors total explained cumulative variance of 91.1%. Confirmatory factor analysis supported goodness of fit and reliability for the modified SECD-6-K model. The criterion validity also showed significant correlation with both the Patient Health Questionnaire and 12-item Short-Form Health Survey version 2. Finally, reliability was found to be excellent. Conclusion: This study identified the high reliability and validity of SECD-6-K. The SECD-6-K is an appropriate tool for determining Korean patients' self-efficacy in managing their chronic conditions. Therefore, this scale may be used in clinical settings as well as in educational and research settings.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.10
• /
• pp.3815-3833
• /
• 2021

MILP-based automatic search is the most common method in analyzing the security of cryptographic algorithms. However, this method brings many issues such as low efficiency due to the large size of the model, and the difficulty in finding the contradiction of the impossible differential distinguisher. To analyze the security of ESF algorithm, this paper introduces a simplified MILP-based search model of the differential distinguisher by reducing constrains of XOR and S-box operations, and variables by combining cyclic shift with its adjacent operations. Also, a new method to find contradictions of the impossible differential distinguisher is proposed by introducing temporary variables, which can avoid wrong and miss selection of contradictions. Based on a 9-round impossible differential distinguisher, 15-round attack of ESF can be achieved by extending forward and backward 3-round in single-key setting. Compared with existing results, the exact lower bound of differential active S-boxes in single-key setting for 10-round ESF are improved. Also, 2108 9-round impossible differential distinguishers in single-key setting and 14 12-round impossible differential distinguishers in related-key setting are obtained. Especially, the round of the discovered impossible differential distinguisher in related-key setting is the highest, and compared with the previous results, this attack achieves the highest round number in single-key setting.

• The Journal of Advanced Prosthodontics
• /
• v.10 no.6
• /
• pp.401-407
• /
• 2018

PURPOSE. When performing an occlusal procedure, it is recommended that the patient should be sitting straight with the head in a natural position. An inappropriate mandibular position caused by an incorrect occlusal record registration or occlusal adjustment can result in damaged teeth and cause functional disorders in muscles and temporomandibular joints. The purpose of this study was to clarify the influence of horizontal cephalic rotation on mandibular position by investigating the three-dimensional positions of condylar and incisal points. MATERIALS AND METHODS. A three-dimensional jaw movement measurement device with six degrees of freedom (the WinJaw System) was used to measure condylar and incisal points. The subjects were asked to sit straight with the head in a natural position. The subjects were then instructed to rotate their head horizontally $0^{\circ}$, $10^{\circ}$, $20^{\circ}$, $30^{\circ}$, $40^{\circ}$, $50^{\circ}$and $60^{\circ}$ in the right or left direction. RESULTS. The results indicated that horizontal cephalic rotation made the condyle on the rotating side shift forward, downward, and toward the inside, and the condyle on the counter rotating side shift backward, upward, and toward the outside. Significant differences in deviations were found for angles of rotation higher than $20^{\circ}$. The incisal point shifted in the forward and counterrotating directions, and significant differences were found for angles of rotation higher than $20^{\circ}$. CONCLUSION. The mandibular position was altered by horizontal cephalic rotations of more than $20^{\circ}$. It is essential to consider the possibility of deviation of the mandibular position during occlusal procedures.

• Journal of Biosystems Engineering
• /
• v.43 no.4
• /
• pp.273-284
• /
• 2018

Purpose: Conventional headland turning typically requires repeated forward and backward movements to move the farming equipment to the next row. This research focuses on developing an upland agricultural robot with an optimized headland turning mechanism that enables a $180^{\circ}$ turning positioning to the next row in one steering motion designed for a two-wheel steering, four-wheel drive agricultural robot named the HADA-bot. The proposed steering mechanism allows for faster turnings at each headland compared to those of the conventional steering system. Methods: The HADA-bot was designed with 1.7-m wide wheel tracks to travel along the furrows of a garlic bed, and a look-ahead path following algorithm was applied using a real-time kinematic global positioning system signal. Pivot turning tests focused primarily on accuracy regarding the turning radius for the next path matching, saving headland turning time, area, and effort. Results: Several test cases were performed by evaluating right and left turns on two different surfaces: concrete and soil, at three speeds: 1, 2, and 3 km/h. From the left and right side pivot turning results, the percentage of lateral deviation is within the acceptable range of 10% even on the soil surface. This U-turn scheme reduces 67% and 54% of the headland turning time, and 36% and 32% of the required headland area compared to a 50 hp tractor (ISEKI, TA5240, Ehime, Japan) and a riding-type cultivator (CFM-1200, Asia Technology, Deagu, Rep. Korea), respectively. Conclusion: The pivot turning trajectory on both soil and concrete surfaces achieved similar results within the typical operating speed range. Overall, these results prove that the pivot turning mechanism is suitable for improving conventional headland turning by reducing both turning radius and turning time.

• Journal of the Korea Convergence Society
• /
• v.9 no.12
• /
• pp.47-52
• /
• 2018

Named Entity Recognition is a system that extracts entity names such as Persons(PS), Locations(LC), and Organizations(OG) that can have a unique meaning from a document and determines the categories of extracted entity names. Recently, Bi-LSTM-CRF, which is a combination of CRF using the transition probability between output data from LSTM-based Bi-LSTM model considering forward and backward directions of input data, showed excellent performance in the study of object name recognition using deep-learning, and it has a good performance on the efficient embedding vector creation by character and word unit and the model using CNN and LSTM. In this research, we describe the Bi-LSTM-CNN-CRF model that enhances the features of the Korean named entity recognition system and propose a method for constructing the traditional culture corpus. We also present the results of learning the constructed corpus with the feature augmentation model for the recognition of Korean object names.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.29 no.4
• /
• pp.753-773
• /
• 2019

CV(Connected Vehicle) technology provides safety-related services and user convenience-related services to vehicle. Safety-related services can cause privacy problem by continuously transmitting vehicle information to nearby vehicles or base stations. Therefore, safety-related services should provide vehicle anonymity for privacy protection. However, if convenience-related services such as payment services fail to provide vehicle anonymity, driver information related to safety-related services may also be leaked. In this paper, we design a payment protocol based on ECQV(Elliptic Curve Qu-Vanstone) impicit certificate and group signature that provides BU-anonymity and traceability. The proposed payment protocol makes it impossible to track vehicles from payment transactions history by separating roles of payment system components. Moreover, we define the security requirements that the vehicle payment protocol must satisfy and show that the protocol satisfies the requirements.

• International Area Studies Review
• /
• v.15 no.3
• /
• pp.451-470
• /
• 2011

Many countries are committed to absorb foreign direct investments (FDIs). One of the strong motivations is the improvement of innovative capability through the technology spillover of FDI firms. The effect of FDI technology spillover has been widely researched not only on country level, but industry level. With the evolution of globalization and global sourcing of multinational companies, it is necessary to reexamine the relationship between innovation ability of an industry and spillover effect of FDI. This paper investigates the technology spillover effect of FDI on the innovation of Chinese firms. We gathered the data of 34 industries form various sources of Chinese government and the time span is 2001-2008. By using industry level panel data, we set panel data analysis model. In the model, there are two explanatory variables: backward and foreward integration. The analysis result shows that technology spillover of FDI has significant effect on the innovation of foreward integration FDI.

• The Journal of the Korea Contents Association
• /
• v.19 no.6
• /
• pp.387-401
• /
• 2019

The aim of this study is to investigate the effects of income inequality caused by capital and wage incomes under globalized economic system in Korea. Empirical evidences which are obtained by cointegration methodology reveal that the effects resulted from capital and wage incomes to income inequality are alternative between short-run and long-run. And, the wage income has stronger impact on income inequality than the capital income. This might be occured as a result of that inbound foreign capital seems not to contribute to economic activity in real sector. It also has to be mentioned that the income inequality is negatively influenced by international trade in the short run and in the long run as well. To this end, it would be concluded that well-organized distribution system for wage income should be established, accordingly. And, forward and backward linkages in exporting industry have to be re-evaluated in order to improve income inequality in Korea.