• 한국재료학회지
• /
• 제29권11호
• /
• pp.703-708
• /
• 2019

In this study, we investigate the relationship between the peeling behavior of the backsheet of a photovoltaic(PV) module and its surface temperature in order facilitate removal of the backsheet from the PV module. At low temperatures, the backsheet does not peel off whereas, at high temperatures, part of the backsheet remains on the surface of the PV module after the peeling process. The backsheet material remaining on the surface of the PV module is confirmed by X-ray diffraction(XRD) analysis to be poly-ethylene(PE). Differential scanning calorimetry(DSC) is also performed to investigate the interfacial characteristics of the layers of the PV module. In particular, DSC provides the melting temperature($T_m$) of laminated ethylene vinyl acetate(EVA) and of the backsheet on the PV module. It is found that the backsheet does not peel off below the $T_m$ of ethylene of EVA, while the PE layer of the backsheet remains on the surface of the PV module above the $T_m$ of the PE. Thus, the backsheet is best removed at a temperature between the $T_m$ of ethylene and that of PE layer.

• 전기학회논문지
• /
• 제67권3호
• /
• pp.448-453
• /
• 2018

PV module protective film plays an important role in protecting the solar cell from external environment by anti-hydrolysis polyester, UV resistance and mechanical properties. The backsheet was manufactured by using Roll-to-Roll dry laminating process. The backsheet structure is composed of 3 layers, which are PE, PET, and Fluorine polymer films. In this study, we have experimented the variation of thermal conductivities depending on MgO inputs 10% to 25% in order to confirm the dependence of the module efficiencies. High thermal conductive backsheet can increase the module output power efficiency because the heat is dissipated by spreading out the internal heat. Long-term environment weatherability tests were conducted for confirming 25 year reliability in the field such as PCT, UV, and power efficiency degradations. As the evaluation result, high thermal conductivity can be effective for increase of power efficiency of solar panel by using thermal conductive MgO masterbatch.

• 멤브레인
• /
• 제25권6호
• /
• pp.530-537
• /
• 2015

태양광 발전시스템은 태양복사에너지를 반도체의 광전효과를 이용하여 전기에너지로 직접 전환시키는 에너지변환 시스템이다. 태양전지의 내구성과 에너지변환율에 영향을 미치는 핵심소재로는 다층형 필름구조를 갖는 백시트를 들 수 있다. 대표적인 상용 백시트는 고내구성 poly(vinyl fluoride) (PVF) 필름이 중심축에 위치하고 가격저감을 위해 도입된 poly(ethylene terephthalate) (PET) 필름이 그 양쪽에 접합된 삼층구조로 구성된다. 하지만, PVF 필름의 높은 가격은 저렴한 고내구성 백시트를 요구하는 시장상황을 반영하기 어렵게 한다. 이를 위한 해결책으로는 PVF 필름을 결정성 PET 필름으로 대체한 탄화수소계 백시트가 될 수 있다. 하지만, PET 필름의 본질적인 가수분해에 대한 취약성으로 인해, 추가적인 수분에 대한 배리어성 부여는 필수적이다. 이를 위해 본 연구에서는 소수성 실리카 나노입자 분산기술을 활용한 수분차단성 폴리우레탄 접착제를 개발코자 하였다. 개발된 접착제는 내부에 위치한 PET 필름으로의 수분침투를 약화시켜, 가수분해속도를 지연시킬 것이라 기대되었다. 본 개념의 효용성을 확인하기 위해, 표준화된 온습도조건에 노출된 이후의 일반접착제와 수분차단성 접착제가 도입된 백시트의 기계적 강도 및 시간당 태양전지성능 변화가 비교평가되었다.

• Current Photovoltaic Research
• /
• 제6권2호
• /
• pp.39-42
• /
• 2018

When the PV module is illuminated in a high temperature region, solar cells are also exposed to the high temperature external environment. The operating temperature of the solar cell inside the module is increased, which causes the power drops. Various efforts have been made to reduce the operating temperature and compensate the power of solar cells according to the outdoor temperature such as installing of a cooling system. Researches have been also reported to lower the operating temperature of solar cells by improving the heat dissipation properties of the backsheet. In this study, we conducted a test to measure the internal temperature of each module components and the external temperature when the light was irradiated according to the surrounding temperature. Backsheets with different thermal conductivities were compared in the test. Finally, in order to explain the temperature difference between the solar cell and the outside of the module, we proposed an evaluation method of the heat transfer characteristics of photovoltaic modules with different backsheet.

• 멤브레인
• /
• 제25권3호
• /
• pp.287-294
• /
• 2015

태양전지는 태양복사에너지를 반도체의 광전효과를 통해 전기에너지로 변환시키는 친환경 에너지변환장치를 의미한다. 수분을 포함하는 다양한 화학물질들에 대한 높은 차단성을 갖는 다층형 필름인 백시트는 태양전지의 중요한 요소이다. 대표적인 백시트는 polyvinyl fluoride (PVF)와 poly(ethylene terephthalate) (PET)의 다층필름으로 구성된다. PVF는 높은 내후성을 가지는 반면, 가격이 상대적으로 비싼 단점을 보인다. 따라서, 백시트의 제조가격을 낮출 수 있으면서, 동시에 실제 태양전지모듈에 적용할만한 수명특성을 만족시킬 수 있는 대체소재의 개발이 필수적이다. 본 연구에서는 일정수준의 결정성을 갖는 PET 필름을 PVF 필름 대신 사용하였다. 그러나, PET 소재는 다양한 pH 조건에서 trans-esterification 및 가수분해에 의해 분해될 수 있기 때문에, 태양전지의 구동조건에서 PET의 분해거동을 이해할 필요가 있다. 단시간 내 화학적 분해거동을 평가하기 위해서, 가속화된 PET 분해실험 프로토콜이 개발되었다. 마지막으로, 제안 개념의 효용성은 태양전지모듈의 장기운전성능 평가를 통해 확인하였다.

• Current Photovoltaic Research
• /
• 제8권1호
• /
• pp.12-16
• /
• 2020

This study investigates the degradation characteristics of different material types of ethyl vinyl acetate (EVA) and polyolefin (POE) with combining transparent backsheet. To this end, we fabricated samples with structure of glass/encapsulant/transparent backsheet for each type of encapsulants, and shingled Si modules with the same structure. The samples were then subjected to accelerated test by storing under damp heat condition of 85℃ and 85% RH. As a result, encaplsulant discoloration was observed, which the transmittance of the samples with EVA decreased in a rapid rate than the samples with POE. The discoloration also affected a power degradation of the shingled modules with a reduction of current density, resulting that the module with EVA showed more drop on the efficiency than the modules with POE. Furthermore, corrosion of the soldered ribbon caused by acetic acid produced from the degraded EVA also contributed in fill factor reduction.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 춘계학술발표대회 논문집
• /
• pp.121-124
• /
• 2005

This paper was about experimental test properties by mechnical joint of CF1263/Epoxy Al honeycomb panels. In case of mechanical joint using screw, nut shall be secured over than minimize third screw pitch. In case of insert backsheet for increase of joint force, increase weight for assemble by screw pitch. In case of insert backsheet with CF1263/Epoxy, predominant save weight and minimazer of displacement by tensile weight moreover predominant strength. In case of mechanical joint by rivet, rivet of Monobolt has over-hole in hole of CF1263/Epoxy but rivet of PROTRUDING has predominant of mechanical joint.

• Current Photovoltaic Research
• /
• 제8권4호
• /
• pp.129-133
• /
• 2020

It is very important to optimize the reflectance of incident light in solar modules for improving output power and reducing loss of cell-to-module (CTM). It is assumed that a higher reflectance backsheet may improve optical efficiency. However how much output power is related to optical properties by reflectance property of backsheets have not been revealed clearly yet. A total of 3 types of industrial backsheets with 3 type of industrial encapsulants (EVA or POE) were analyzed as fabricated mini modules used shingled cells. According to the type of backsheets, the difference between the highest and lowest average reflectance in the range of 400 nm to 1200 nm was found to be 13.08% by UV-visible spectroscopy. Also, when using the same encapsulant, the maximum gap value of the output power increase was measured by about 3.755 mW% (166.02 mW). The correlation between reflectance and output power was experimentally found by measuring the output property of the fabricated shingled mini modules.

• Current Photovoltaic Research
• /
• 제6권2호
• /
• pp.62-67
• /
• 2018

Multi-wire busbar-type bifacial n-type Si solar cells have been used for the fabrication of monofacial and bifacial photovoltaic (PV) module, where bifacial module was equipped with transparent backsheet while monofacial module was prepared using white backsheet. The comparison of six-day accumulated power production obtained from outdoor test under gray cement ground conditions using 60cell monofacial and bifacial PV modules suggested the bifacial gain of over 20% could be achieved. Furthermore, the outdoor evaluation tests of bifacial modules with different ground conditions such as cement (reference), green paint, white paint and green artificial grass, were performed. It turned out white paint showed the best albedo and thus the highest power production, while green paint and artificial grass showed less power generation than cement ground.

• Current Photovoltaic Research
• /
• 제10권1호
• /
• pp.1-5
• /
• 2022

Bifacial photovoltaic (PV) technology has received considerable attention in recent years due to the potential to achieve a higher annual energy yield compared to its monofacial PV systems. In this study, we fabricated the bifacial c-Si PV module with a shingled design using the conventional patterned bifacial solar cells. The shingled design PV module has recently attracted attention as a high-power module. Compared to the conventional module, it can have a much more active area due to the busbar-free structure. We employed the transparent backsheet for a light reception at the rear side of the PV module. Finally, we achieved a conversion power of 453.9 W for a 1300 mm × 2000 mm area. Moreover, we perform reliability tests to verify the durability of our Shingled Design Bifacial c-Si Photovoltaic module.