• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.11
• /
• pp.728-733
• /
• 2017

Herein, for the quantitative analysis of the arc beads related to electric fire, we used electron backscatter diffraction (EBSD), a measuring device for grain orientation of materials, we compared and analyzed the surface texture of primary and secondary beads according to the difference in cooling rate at ambient temperature. This analysis revealed that the primary beads showed similar distribution at both low and high angles, while the secondary beads showed a higher distribution at low angles than at high angles. Thus, EBSD can be used for quantitative analysis of the beads and can be applied to identify beads in the future.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.2
• /
• pp.32-43
• /
• 2004

RFID 시스템에서 태그는 리더와 전자기 에너지 교환에 의해 동작을 하며 배터리를 사용하는 active 형 태그와 배터리를 사용하지 않는 passive형 태그로 크게 구분된다. 또한 태그는 자체 회로구조에 의해 harmonic 태그, anharmonic 태그, sequenced amplifier 태그로 나뉜다. Passive 태그에서는 리더의 반송파 backscatter 방식을 이용하여 동작을 하며 active 태그는 자체 발진회로에 의해 태그정보를 송신한다. 태그의 변조방식으로 PSK, FSK, ASK 등을 사용하며 변조방법에 따라 회로 구성과 프로토콜 설계가 달라진다. 또한 리더의 전파 신호를 정류하기 위하여 렉테나(rectenna)가 필요하다. 본 논문에서는 태그의 분류, 동작, 구조 등에 관한 일반적인 내용을 기술하였다. 특히 UHF 대역 이상의 태그 기술 최근 추세가 안테나 부분을 제외하고 CMOS one chip화 하는 수준으로서 900 MHz UHF 대역, 2.45 GHz RFID 칩이 상용화 되어 있다. 칩의 내부구조와 태그의 변조방식에 의거한 동작에 관한 개괄적인 내용을 서술하였다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.6
• /
• pp.779-792
• /
• 1997

Flow characteristics are numerically investigated when a packet of waves consisting of a Tollmien-Schlichting wave and a pair of Squire waves evolves in a flat-plate laminar boundary layer using a large eddy simulation with a dynamic subgrid-scale model. Characteristics of early stage transitional boundary layer flow such as the .LAMBDA. vortex, variation of the skin friction and backscatter are predicted. Smagorinsky constants and the eddy viscosity obtained from the dynamic subgrid-scale model significantly change as the flow evolves. Far Field noise radiated from the transitional boundary layer shows the dipole and quadrupole characteristics owing to the wall shear stress and the Reynolds stresses, respectively.

• The Journal of the Acoustical Society of Korea
• /
• v.25 no.4E
• /
• pp.159-165
• /
• 2006

Human, horse and rat bloods in a cylindrical chamber where flow was controlled by a stirring magnet were used for studying red blood cell aggregation. Ultrasound backscattered powers from blood were obtained from the backscattered signals measured by a 5 MHz focused transducer in a pulse-echo setup. The experimental results showed the differences in red blood cell (RBC) aggregation tendency among the three mammalian species with an order of horse > human > rat. The ultrasound backscattered power decreased with stirring speed in human and horse blood, but no variations were observed in rat blood. Sudden flow stoppage led to the slow increase of the backscattered power for human and horse blood. There was no self-aggregation tendency in rat blood. The enveloped echo images showed the spatial and temporal variations of RBC aggregations in the cylindrical chamber. These observations from the different mammalian species may give a better understanding of the mechanism of RBC aggregation.

• Proceedings of the KSR Conference
• /
• 2000.11a
• /
• pp.571-577
• /
• 2000

This paper is designed for the identification system of the train using RFID(radio Frequency Identification) in the 134.2㎑. The reader of transmitter transmits an interrogation signal to the tag, then the tag of receiver retransmits the defined data to the reader after receiving the interrogation signal from it. The system is also applied to the reflection communication as a backscatter modulation and selected the passive Pouter system which does not need an active electrical power device. It is useful that ore can effectively manage and control of the information of train such as materials loaded in the train. We make the reader of the identification system for the train which can communicate with the tag installed under the train.

• Advances in materials Research
• /
• v.9 no.3
• /
• pp.171-187
• /
• 2020

The microstructural evolution of different compositions of Mg-Sn alloys (30%Sn-70%Mg, 40%Sn-60%Mg and 50%Sn-50%Mg) is studied at first to understand the changes observed with change in tin content and deformation conditions. The Mg₂Sn phase increases with increase in tin content and a significant substructure development is found in 50%Sn-50%Mg alloy. The above observation led to further deformation studies on Mg₂Sn based thermoelectric materials with higher tin percentage. The microstructure in terms of Electron backscatter diffraction (EBSD)measurements is studied in detail followed by the determination of thermoelectric properties i.e., Seebeck coefficient and electrical conductivity for both as cast and extruded Mg_(2+x)Sn-Ag alloys. The electrical conductivity of the extruded Mg_(2+x)Sn-.3wt%Ag {x =1} alloy was found to be more than its as cast counterpart while the Seebeck coefficient values remained almost the same.

• Korean Journal of Materials Research
• /
• v.27 no.9
• /
• pp.484-488
• /
• 2017

In the present study, domain evolution processes of a near-morphotropic PZT ceramic during poling was studied using vertical piezoresponse force microscopy (PFM). To perform macroscopic poling in bulk polycrystalline PZT, poling was carried out in a stepwise fashion, and PFM scan was performed after unloading the electric field. To identify the crystallographic orientation and planes for the observed non-$180^{\circ}$ domain walls in the PFM images, compatibility theory and electron backscatter diffraction (EBSD) were used in conjunction with PFM. Accurate registration between PFM and the EBSD image quality map was carried out by mapping several grains on the sample surface. A herringbone-like domain pattern consisting of two sets of lamellae was observed; this structure evolved into a single set of lamellae during the stepwise poling process. The mechanism underlying the observed domain evolution process was interpreted as showing that the growth of lamellae is determined by the potential energy associated with polarization and an externally applied electric field.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.218-222
• /
• 2010

본 연구에서는 ${\sigma}$-좌표계를 기반으로 하는 3차원의 이송확산 모형과 depth-integrated eddy simulation 모형을 결합한 효율적인 3차원 근역 (near-field) 해석모형을 제시하였다. 흐름 모형은 Boussinesq-type equations과 stochastic backscatter model을 기본으로 하고 있다. 이 흐름 모형은 수면의 변화와 바닥으로부터 발생하는 전단력과 파랑의 유동으로부터 발행하는 수심방향의 유속분포를 예측할 수 있다. 이와 같은 흐름 정보를 3차원 ${\sigma}$-좌표계의 이송확산모형에 제공하고 scalar의 이송과 확산에 대한 거동을 계산한다. 기본적인 이송과 이송-확산에 대한 검증 및 개수로에서 정량적 검증과 정성적 검증을 수행하였다. 전반적으로 타당한 결과가 도출되어 모형의 적합성이 있음을 확인하였다.

• The Korean Journal of Ceramics
• /
• v.6 no.4
• /
• pp.405-407
• /
• 2000

Polycrystalline films of Ni- and Co-ferrites films are prepared from aqueous solution at $90^{\circ}C$ by ferrite plating, which are subjected to Fe$^57$ conversion electron Mossbauer spectroscopy in backscatter mode. The average angle of Fe spins relative to the film plane is evaluated as 18 degree and 82 degree for the Ni- and Co-ferrite films, respectively, indicating a prominent magnetic anisotropy parallel and perpendicular to the film plane. It was also verified by the magnetization measurements.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.348-349
• /
• 2006

The plastic deformation behavior of cemented carbides is related to the WC grain boundary strength. Ab initio calculations predict that Co and Mn segregate to WC/WC grain boundaries. To experimentally study the effect of Mn, a WC-Co-Mn material was manufactured and compared to a WC-Co material. The microstructure was studied using scanning electron microscopy (SEM), including electron backscatter diffraction (EBSD). Special attention was paid to the WC grain size and the frequency of special low-energy grain boundaries. Mn was found to have negligible effect on both the WC grain growth and the fraction of $\sum2$ WC/WC boundaries in the as-sintered material.