• Journal of Magnetics
• /
• 제14권1호
• /
• pp.47-51
• /
• 2009

The coreless linear synchronous motor (coreless LSM) has been widely used as a driving source of semiconductor production processes for machine speeding up, positioning accuracy and simple maintenance. However, this coreless LSM suffers the disadvantage of decreased thrust force created by the leakage of magnetic flux. With the goal of increasing the generated thrust force and decreasing the cogging force, the slot of the core part was removed and a moving-coil-type slotless LSM (moving-coil-type slotless LSM) is proposed in this paper. Although this moving-coil-type slotless LSM with a back-yoke at the primary side demonstrated an increase in the generated thrust force, it remained capable of generating the cogging force when the primary side was moved due to the position between the permanent magnet and the back-yoke. Therefore, we attempted to decrease the cogging force of the moving-coil-type slotless LSM. We found that the back-yoke length at the primary side needs to be made $0.5{\tau}$ longer than the integral multiple of the magnetic pole pitch in order to decrease the cogging force created by the moving-coil-type slotless LSM.

• 대한가정학회지
• /
• 제47권4호
• /
• pp.61-72
• /
• 2009

The purpose of this research is to suggest a new way to approach measuring the waist line of slacks. The pattern formulated enables a construction method that optimizes motion. The method is based on the measurement on the length change of the body surface line. The research reveals: 1. The analysis of expansion and contraction by area showed that G8 markedly shrunk, whilst G15 maximally stretched during M4 motion. 2. The areas that stretched during M2 motion were, in order of size: G10, G17, G16, and G8. Conversely, the areas that shrunk are, in order, G9, G11, and G18. The areas that stretched during M3 motion were G10, G17, G16, G12, and G15; the areas that shrunk were G9, G11, G18, and G8. 3. In constructing the slacks pattern to allow for appropriate movement, we calculated the length between the knee and back of the waist, point (y), using Pythagoras’theorem and trigonometry. The equation was y = 1.005x. 4. In the two pattern N method and L method, y is equal or less than x, but for our research pattern, y was larger than x

• 대한가정학회지
• /
• 제46권9호
• /
• pp.137-146
• /
• 2008

This study was conducted in order to spread out lower body 3D scan data of men in their twenties. The aim was to achieve slacks pattern with ease allowance through comparison with existing flat patterns. For conversion of 3D scan data into 20 pattern, reference lines were established by using Rapid Foam in 3D shape analysis software. 2C-AN program and Yuka CAD were used to convert 20 pattern earned with straight posture of 3D scan data into slacks pattern by using Triangle Simplification & Runge-Kutta Method. In order to achieve this we needed to set a line 9cm below the hip line, to array vertex of each block to crease line while maintaining the horizontal line. And then we needed to set ease allowance in back crotch and to set waist circumference or hip circumference ease allowance in side seam of slacks. Results showed that long front crotch length can be achieved if 3D scan data is compared with 20 existing flat pattern. Slacks pattern that raise front crotch by about 1.5cm compared to back crotch and also possess ease allowance in back crotch area are great in appearance evaluation.

• Journal of Power Electronics
• /
• 제17권5호
• /
• pp.1223-1230
• /
• 2017

The back emf harmonics of a permanent magnet (PM) synchronous motor is a major source of torque ripple. For torque control applications including column fitted MDPS (motor driven power steering) systems, it is essential to reduce the mechanical vibrations due to torque ripples at low speeds. In this paper, a torque ripple reduction algorithm for interior PM synchronous motors is proposed. The harmonic currents that cancel the $6^{th}$ order torque harmonic are added to the nominal dq currents for MTPA (maximum torque per ampere) operation. The compensated harmonic currents are derived from flux linkage harmonics based on a FFT analysis of the back emf harmonics. Simulation and experimental results verify that the $6^{th}$ order torque harmonic and THD of the torque ripple are reduced by compensating the dq harmonic currents.

• 대한물리의학회지
• /
• 제8권2호
• /
• pp.193-200
• /
• 2013

PURPOSE: The purpose of this study was to find out variations in body posture by using the baby carrier at the front side and back side. METHODS: Thirty two healthy and young female who will bring up infants and had no musculoskeletal disorders of neck, lumbar and low limb were recruited for this study. They were each marked about ears of tragus, cervical 7th, acromion anterior end, anterior superior iliac spine, posterior superior iliac spine, greater trochanter and lateral malleolus as landmarks to measure variations of body posture when they carry infants at the front side and back side. Landmarks were regarded as the creteria in order to measure NeckFlexion angle(NF), Foreward shoulder angle(FSA), Pelvic tilt(PT), Sway angle(SA), Head displacement(HD) and Scapular displacement(SD). Variations in body posture were measured from the neutral position to the front and back side by using Image J. RESULTS: There were significance level (p<.05) in NF, PT, SA, HD and SD except for FSA in two different side. CONCLUSION: The results of this study indicate that each of the using ways of baby carrier for baby care was influenced postural responses of young women. therefore, it could be considered to apply to women who have abnormal body posture in order to minimize musculoskeletal disorders.

• 기술사
• /
• 제30권5호
• /
• pp.96-104
• /
• 1997

This study analyze industrial safety and health planning report for manufacture. The purpose of accident analysis is to obtain accurate and objective information about the causes of accidents in order to prevent accidents from reoccurring. This study investigated the causes and conditions of occupational accidents in Korean industry. As the most accidents are occurred in lifting material, the questionnaire analyses about injuries are operated for occur to deal with the Manual Materials Handing. The results show that there are some characteristics in the accidents of Korean industry since 1986: (1) accidents rates tend to have lower since 1983(1994-1.18%, 1995-0.99%, 1996-0.88%), (2) larger companies tend to have lower accident rates than the smaller ones, (3) inexperience is related to high accident rates(1995-51.26%, 1996-48.82%1, because of the careless education for freshman such as OJT which in order to prevent accident, and (4) the body sites most vulnerable to injury are the hands and fingers and increased the back(caused of Back pain). The results of questionnaire analysis show that operator(n= 104) interested in reinforce the back & belly(42.86%). These finding identified in this study can be used to prevent the industrial accidents, and used to improving directions based on analyzed result.

• 한국컴퓨터정보학회논문지
• /
• 제23권1호
• /
• pp.91-102
• /
• 2018

The purpose of this study is to develop an excellent bodice prototype that is adapted to the body shape of middle-aged women using 3D measurement data. In the evaluation of appearance, S pattern 4.00, B pattern 2.80, E pattern 2.40, L pattern 1.40 were shown in order, and the best fit of S pattern was evaluated as excellent. As a result of looking at the color distribution chart to find out the amount, E pattern and S pattern were not space in the front bust, armhole, and the back waist line. The B pattern and the L pattern were marked in blue because of insufficiency space in the back neck. As a result of evaluation the amount of air gap in the clothing, the air gap of the bust was 0.12, which is the largest pattern of B. Next, the L pattern appears as a tight circle with smallest air gap in the order of the S pattern 0.096, the E pattern 0.08, and the L pattern 0.003. The S pattern was evaluated to be the most appropriate for the body shape of middle-aged women. But the waist and back were slightly tight. Middle-aged women have larger shoulder-related items and larger waist circumference. Therefore, when you set the perimeter item, you should add 1-2cm of space amount and give extra space to the circumference area.

• 패션비즈니스
• /
• 제9권4호
• /
• pp.145-160
• /
• 2005

On the subjects of the female adults in their 20s who love to wear jeans, the wearing reality of basic jean pants and engineered jean pants was examined while pattern comparison and the evaluation of appearance and functions were made to reach the following conclusions: 1. Wearing reality of engineered jean pants Among the examined subjects, 74.8% were found out to favor engineered jean pants. Those who have engineered jean pants turned out to pursue well-known brands more than practicality. 2. Pattern comparison analysis of basic jean pants and engineered jean pants Though similar sizes existed in pants tips and belt width, engineered jean pants showed bigger values in waist circumference, crotch circumference, hip circumference, knee circumference, thigh circumference and so on. There were no big differences in the front part except for the items like crotch circumference and crotch length, but engineered jean pants had bigger sizes in the rear part. Engineered jeans in the rear contained the outward curved silhouette of the legs, curved tips, and a dart design instead of a back yoke. 3. Evaluation of appearance and functions In the scores of appearance, basic jean pants were higher at 3.65 in the order of front > side > back. On the contrary, engineered jean pants were excellent in the order of side > back > front. In the items of functions, engineered jean pants were higher at 4.23 in the order of hips > thighs> waist > abdomen > knee > crotch. On the other hand, basic jean pants showed the order of knee > crotch & thighs > abdomen > hips > waist. In every movement, engineered jean pants revealed higher functionality. In particular, the bigger physical movement led to the greater functional differences between the two kinds of jean pants.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 추계학술대회 논문집
• /
• pp.453-453
• /
• 2009

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 전력전자학술대회 논문집
• /
• pp.94-96
• /
• 2001

As a batch Type device, this machine is contrive to seal glass plates for plasma BLU (Back Light Unit) by indirect heating from electric heaters. In order to maintain the heating / cooling Chambers clean, this machine uses a muffle formation. The components of the machine are listed bellow.