• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1991년도 추계학술발표회 논문집 지반공학에서의 컴퓨터 활용 COMPUTER UTILIZATION IN GEOTECHNICAL ENGINEERING
• /
• pp.25-33
• /
• 1991

The slope stability analysis of Carsington dam is performed, considering the effects of pore water pressure, slip surface configuration, lateral stress and various shear strengths. Without yellow clay layer, the Bowles' and STABR programs were used to find the circular slip surface which has the maximum safety factor. At last using the Morgenstern-Price method, the effects of rainfall and strength of yellow clay were mainly considered in the back analyses after failure. It was found that (1) the potential slip was not predicted in the analysis based on the modified Bishop method without considering the yellow clay layer, and (2) the crllapse of dam had been occurred according to the critical shear strength of the yellow clay and pore water pressure increase.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 추계학술대회논문집
• /
• pp.132-135
• /
• 2003

Asymmetric rolling, in which the ratio of the rotation rates of the upper and lower rolls was 2, has been used to introduce an intense plastic shear strain for the purpose of grain refinement and developing shear deformation textures through the sheet thickness to improve the strength and plastic strain ratio of AA1050 aluminum alloy sheets. The alloy sheets were rolled at room temperature without lubrication. The textures and microstructures of the sheets were investigated by x-ray diffraction and electron back-scattered diffraction (EBSD) analyses with emphasis on effects of combinations of rot ling directions.

• 한국산업경영시스템학회:학술대회논문집
• /
• 한국산업경영시스템학회 2002년도 춘계학술대회
• /
• pp.329-334
• /
• 2002

This study deals with a Logistics Information System(LIS) in recording industry. Many companies developed a LIS to minimize logistics cost and improve customer services. However, due to the diversity of distribution structure and the complexity of logistics process, developing an LIS in recording industry is complicated. This paper analyses the current situation in domestic recording industry and presents a framework of LIS. This system is composed of the front office related to the logistics processes and the back office related to the rest of the processes. This system can be used to develop an LIS in logistics industry. Some examples are given and discussed to validate the proposed LIS.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.89-91
• /
• 2008

This paper deals with the thrust calculations and the measurements of a cylindrical Linear Oscillatory Actuator (LOA) sing Transfer Relations Theorem (TRT), namely, Melcher's methodology. Using transfer relations derived in terms of a magnetic vector potential and a two-dimensional (2-d) cylindrical coordinate system, this paper derives analytical solutions for the magnetic vector potential, magnetic fields due to Permanent Magnets (PMs) and stator winding currents and the thrust. The analytical results are validated by non-linear Finite Element (FE) analyses. In particular, test results such as thrust and back-emf measurements are given to confirm the analysis.

• Journal of the Korean Data and Information Science Society
• /
• 제16권3호
• /
• pp.567-580
• /
• 2005

It is usually assumed that asset returns in the stock market are normally distributed. However, analyses of real data show that the distribution tends to be skewed and to have heavier tails than those of the normal distribution. In this paper, we investigate the method of estimating the value at risk(VaR) of stock returns. The VaR is computed by using the transformation and back-transformation method. The analysis of KOSPI and KOSDAQ data shows that the proposed estimation outperformed that under the normal assumption.

• 품질경영학회지
• /
• 제28권3호
• /
• pp.145-154
• /
• 2000

Effective management of knowledge is essential to keep up with demands of this challenging information age. The first step for this kind of management would be to define indicators to evaluate the quality of knowledge. In this paper, we use five latent variables (intrinsic quality, representational quality, ease of use of quality, maintainable quality, usage of quality) as basis for a preliminary path analysis for knowledge management. Preliminary study results showed that high intrinsic quality does not necessarily guarantee high frequency of use. A modified questionnaire is made and is used for SERVQUAL. The result of SERVQUAL shows that customers are not relatively happy about both intrinsic quality and its ease of use. Additional path analyses are done for both expected and observed quality indicators. The path model based on the expectation indicated that the presentation method of knowledge would induce its easy maintenance while that based on observation did not back up the same phenomenon.

• 소성∙가공
• /
• 제12권1호
• /
• pp.49-59
• /
• 2003

To reduce the cost of finite element analyses for sheet forming, a 3D hybrid membrane/shell method has been developed to study the springback of anisotropic sheet metals. In the hybrid method, the bending strains and stresses were analytically calculated as post-processing, using incremental shapes of the sheet obtained previously from the membrane finite element analysis. To calculate springback, a shell finite element model was used to unload the final shape of the sheet obtained from the membrane code and the stresses and strains that were calculated analytically. For verification, the hybrid method was applied to predict the springback of a 2036-T4 aluminum square blank formed into a cylindrical cup. The springback predictions obtained with the hybrid method was in good agreement with results obtained using a full shell model to simulate both loading and unloading and the experimentally measured data. The CPU time saving with the hybrid method, over the full shell model, was 75% for the punch stretching problem.

• 한국균학회지
• /
• 제45권3호
• /
• pp.224-228
• /
• 2017

The fungal strain, designated KNU16-008, was isolated from field soil in Chungcheongnam-do, Korea. The isolated fungi was characterized by morphological and phylogenetic analyses. Isolated fungus showed typical morphological characteristics of the genus Sporothrix. Based on its phylogenic analysis using internal transcribed spacer (ITS) of rDNA and ${\beta}$-tubulin gene sequences, the strain KNU16-008 was identified as Sporothrix stylites. This species has not been previously reported in Korea.

• East Asian Economic Review
• /
• 제20권1호
• /
• pp.3-35
• /
• 2016

This paper analyses the new discipline on state-owned enterprises contained in the recently concluded Trans Pacific Partnership Agreement, and evaluates various factors that influenced the shaping of its specific rules. The new discipline consolidates and strengthens related provisions in current trade regimes, reflects various aspects of trade disputes between China and the US, and adopts, as its general underlying rationale, the principle of competitive neutrality. The new discipline contains elements that may challenge the multilateral trade regime, and may serve as a role model in regulating state-owned enterprises, including subsidies in services trade in other on-going trade negotiations. The new regime makes us think hard about fundamental issues regarding enforcement of competition policy against state-owned enterprises, treatment of non-market economies, and how to deal with effects of subsidies in international trade, bringing competition issues back on the trade agenda.

• 전기학회논문지
• /
• 제60권5호
• /
• pp.942-948
• /
• 2011

This paper deals with characteristic analysis of axial flux permanent magnet (AFPM) machines with axially magnetized PM rotor using quasi-3-D analysis modeling. On the basis of magnetic vector potential and a two-dimensional (2-D) polar-coordinate system, the magnetic field solutions due to various PM rotors are obtained. In particular, 3-D problem, that is, the reduction of magnetic fields near outer and inner radius of the PM is solved by introducing a special function for radial position. And then, the analytical solutions for back-emf and torque are also derived from magnetic field solutions. The predictions are shown in good agreement with those obtained from 3-D finite element analyses (FEA). Finally, it can be judged that analytical solutions for electromagnetic quantities presented in this paper are very useful for the AFPM machines in terms of following items : initial design, sensitivity analysis with design parameters, and estimation of control parameters.