• Journal of the Korean Home Economics Association
• /
• v.41 no.11
• /
• pp.1-9
• /
• 2003

The somatotype classification of this study was to manufacture well-fitted clothes for middle-aged women. The somatotype classification of the upper body of lateral view was based on previous studies, and 4 postures, straight posture, leaning back posture, bent forward posture, and swayback posture were selected for this study. The front of leaning back posture was longer and wider than that of straight posture, and its front neck depth was deeper. Its front interscye breadth was wider and back interscye breadth was narrower. S.N.P. B.P. front waistline length, waist front length, front diagonal length, chest shedder length, front waistline shoulder line length were longer, and S.N.P. scapular back waistline length, back length, back shoulder length, back diagonal length, shoulder line back waistline length were shorter. On the contrary, the front of bent forward posture was shorter and narrower than that of straight posture, and its back neck depth was deeper. The properties of swayback posture were similar to those of bent forward posture. Its front was shorter and narrower, but the results of front neck depth and back neck depth were like those of straight posture.

• Fashion & Textile Research Journal
• /
• v.21 no.2
• /
• pp.189-202
• /
• 2019

This study develops a bodice pattern for high school girls aged 17 to 19 that use virtual garment simulation. The study developed a bodice pattern based on the fit evaluation result for two selected bodice patterns. The basic formula of the design method based on the result of 3 times of fit evaluation is as follows: waist back $length=stature/8{\times}1.85cm$, waist front length=waist back length+bust/40+0.7cm, front bust girth=bust/2+4cm, back bust girth=Chest/2+3cm, armscye depth=Chest/4+0.5cm, back interscye length=bishoulder length -1.2cm, front interscye length=back interscye length -1.2cm, front neck width=back neck width -0.3cm. The developed bodice pattern used Bishoulder Length as a criteria for the calculation formula of back interscye length, and back interscye length as a criteria for the calculation formula of front interscye length. The fit evaluation showed the relevance of the bishoulder length, front interscye length, and back interscye length based on a comparison of the calculated figure. A bodice pattern with great body suitability and fitness to high school girls was developed through 3D virtual garment simulation that calculated the application of body proportion to width. This study only analyzed the evaluation result of a virtual model only in a representative form; however, a pattern study is also proposed to compare and analyze the design methods of patterns by body type.

• Journal of Mechanical Science and Technology
• /
• v.14 no.3
• /
• pp.314-319
• /
• 2000

Back-face strain compliance (BFS compliance) for the four-point bend specimen has been calibrated for various crack length ratios. Finite element technique was employed to simulate four-point loading and calculate back-face strain of the bend specimen. The numerically determined strain variation along the back face indicates that the sensitivity to gage placement increases with crack length and back-face strain at the gage length less than O.2W, where W is the width of the bend specimen, can be measured within 5% deviation of the maximum BFS. Non-dimensional back-face strain compliance, -E'BCW, was calibrated with FE analysis and experiment. The experimentally determined compliance indicates good agreement with the numerical compliance and can be expressed as a function of crack length ratio.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.5 no.1
• /
• pp.13-24
• /
• 2003

The purpose of this study is to design Jugori model compatible with the body types of the middle-aged women especially from 40 to 59 years old. The result is as follows: We decided five items as the necessary items for designing jugori model : the bust girth (the breast & shoulder width), the B.P length, the neck width, the armhole circumference, and Hwa-jang. The breast & shoulder width are the size that comes out if the bust is divided by the breast & shoulder width on the basis of the side line, and Hwa-jang is a length measured with arms stretched out to 0° direction. With each person's physical characteristics considered, the application of the size of each body types and body parts is as follows: 1. The breast & shoulder width (1/4 portion) : We decided B/4+2cm as a standard size and, we adjusted the extra room on the basis of the discrepancy between the breast width and the shoulder width to make it fit well to the each body type. For the breast width (1/2 portion), we bisected the difference between the breast width and the shoulder width of the bust, and moved Gut-sup to the center of the Sup and Sup-sun for An-sup. According to the body type, the movement of the Sup for the people with big breasts gets bigger because there should be a big difference between the breast width and the shoulder width for them, and for the people with small breasts the movement will be relatively smaller. For the shoulder width (1/2 portion), we curved the back center line after we shortened as much as the difference between the amount of the shoulder width/2+1cm and of B/4+2cm. The movement of back center line will be bigger for a person with leaned-backward body type. 2. The front & back length: We made the front length to B.P length+2.5cm to have Jugori cover the breast point fully around the bust line, which is a vogue nowadays. For an upright body type, we decided the back length as (AH/2.2)+5cm. And for a bent-forward and a leaned-backward body type, we adjusted the calculation formulae differently taking the physical characteristics into account. We decided the back length (A) as (A.H/2.2)+5cm, and the front length (B) as the back length+5cm. So, (A+B) is the sum of the front length and the back length. Going back to the original formula, the front length is B.P+2.5cm. So, we can decide the back length if we subtract B.P+2.5cm from the sum of the front length and the back length. To make well-fit Jugoris, the front & back length are areas that we should pay attention to if we take each person's physical characteristics into consideration. 3. Go-dae (1/2 portion) : We decided Go-dae as the neck width/2+0.5cm. For an upright body type, because the base line which went down vertically from the tragion was straight, we generally decided Go-dae Dalim line as 1.0cm. But we decided Go-dae Dalim line down to 1.5cm for bent-forward type and up to 0.2cm for leaned-backward type because the upper half of the body of them was bent forward or leaned backward from the base line. 4. The armhole : We decided the armhole circumference as A.H/2+2cm with the whole extra room of 4cm. 5. The side line length : We can calculate the side line length to (the back length-the armhole)/2, and, in terms of the trend, 2.5cm will be appropriate.

• Journal of Fashion Business
• /
• v.11 no.4
• /
• pp.120-134
• /
• 2007

The usage of basic bodice blocks at men's apparel companies is investigated and the domestic and international men's upper bodice blocks are compared to find directions of research on development of bodice basic blocks. The following conclusions are found in this study. 1. The survey shows that basic bodice blocks are not used at men's apparel companies although all the respondents have good knowledge on bodice basic blocks. They responded that basic bodice blocks for representative body figures of each age category or of each country would help comparative studies on domestic and international basic bodice blocks and development of exporting apparel products. Also, they expected the utilization of men's basic bodice blocks both as education materials and in studies of design, of body figures, and of basic blocks for industry. 2. The comparative study on men's bodice blocks shows that waist circumference, hip circumference, neck circumference, height, and shoulder length, in addition to the minimal essential size items such as chest circumference and center back length, are used in most basic bodice blocks. The size formulae of each basic block are compared to find how the sizes are determined. For center back length, either measured back length or a certain proportion of height is used. For front and back interscyes, chest circumference is used in most basic bodice blocks. Either measured size, or a certain proportion of height or chest circumference is used for back height. The averaged ease allowances of basic bodice blocks are 3.2 cm for chest circumference, 10.8 cm for waist circumference, 1.2 cm for front interscye, 0.1 cm for back interscye, 0.2cm for shoulder length, and 0 cm for center back length. However, body blocks for different types of clothes have different ease allowances. Shirt basic blocks have ease allowances of 6.1 cm for chest circumference, 13.7 cm for waist circumference, 1.4 cm for front interscye, 0.6 cm for back interscye, 1.2 cm for shoulder length, and 1.8 cm for center back length. On the other hand, jacket basic blocks have ease allowances of 8.8 cm for chest circumference, 16 cm for waist circumference, 1.1 cm for front interscye, 1.4 cm for back interscye, 1.1 cm for shoulder length, and 0.8 cm for center back length.

• The Journal of Korean Physical Therapy
• /
• v.14 no.4
• /
• pp.55-63
• /
• 2002

Human body balances right and left leg centering around pelvis and spine. Therefore, imbalance of lower extremity means disequilibrium of the body. The difference of lower extremity length can cause a number of clinic symptoms including scoliosis, low back pain, sacroiliac pain, and sports injury. In this study, we tried to analyze low back pain and joint stiffness resulting from the difference of lower extremity length. The subjects were 80 male students who are 20-25 years old. The results of this study were as following: 1. Low back pain depending on the difference of lower extremity length One group which the difference of lower extremity length is above 12mm showed average different length as 18.0mm, the other group which one is below 12mm showed as 6.3mm. A group of above 12mm had more severe low back pain than a group of below 12mm. 2. Joint stiffness depending on the difference of lower extremity length A group of above 12mm had more severe joint stiffness than a group of below 12mm.

• Korean Journal of Occupational Health Nursing
• /
• v.9 no.1
• /
• pp.18-29
• /
• 2000

Back injury is frequent in industry workers and is a common cause of productivity loss. It has been reported that the insured of industrial accident insurance tend to stay in hospital longer than that of other types of insurance. The purpose of this study was to identify factors affecting the length of hospital stay for the treatment of back injury in the workers under industrial accident insurance. The results of this study help insurers develop reasonable industrial accident insurance policy for back injury claims and prevention strategies of work-related back injury. A total of 2,949 patients whose industrial accident insurance claim has been approved for the treatment of work-related back injury from January to December 1999 were included in this study. Relationship between the length of hospital stay and characteristics of patient, work place, back injury, and hospital were assessed using ANOVA, t-test, simple linear regression and multiple resgression. The major findings of this study are as follows : 1. The average length of hospital stay(LOS) was 91.82 days, respectively. 2. Characteristics of Patient LOS of male patients was longer than that of female patients, there was positive correlation between age and LOS and between average wage and LOS. Working period was negatively correlated with LOS. Distance from resident to hospital was positively correlated with LOS and LOS was significantly different dependign on type of duty. 3. Characteristics of Work Place LOS was significantly different depending on types of industry and geographical region of work place. Size of work place was positively correlated with LOS. 4. Characteristics of Back Injury Occupational back pain required shorter LOS compared with back injury due to electric shock. Number of concomitant illnesses and severity of disability were positively correlated with LOS. 5. Characteristics of Hospital Patients treated in community hospitals required significantly longer LOS. Treatment in hospitals with rehabilitation program required decreased LOS. This was more prominent as number of physicians specialized in rehabilitation. 6. Multiple regression analysis revealed that distance form resident to hospital, geographical region of work place, size of work place, number of concomitant illnesses, severity of disability, and type of hospital were factors affecting LOS.

• Journal of Trauma and Injury
• /
• v.30 no.4
• /
• pp.173-178
• /
• 2017

Purpose: Most patients with acute low back pain visit emergency room (ER). They mostly need beds, and if their length of stay is longer, it can become difficult to accommodate new patients at the ER. We analyzed the treatment process of patients with back pain and tried to find method for shortening of the length of stay at the ER. Methods: We retrospectively analyzed the medical records of patients with back pain who visited at our ER for one year. Patients were divided into two groups according to their length of stay at ER and were compared the charateristcs of between two groups. Results: A total of 274 patients were included in the study. Eigthy-nine patients (32.5%) were in the group with less than 3 hours and 185 patients (67.5%) were in the other group. In the comparison of the two groups according to the medical departments, the number of patients who were in group with more than 3 hours were 25 (14.0%) in the emergency department, 94 (50.5%) in neurosurgery, 66 (35.5%) in orthopedic surgery. Length of stay was significantly increased in orthopedic surgery and neurosurgery (p=0.014). In addition, the length of stay was longer when computed tomography and magnetic resonance imaging examinations were performed (p=0.000). Regardless of the type of analgesic agent, the median time to the analgesic treatment was shorter in the group with less than 3 hours (p=0.034). Conclusions: In patients with back pain who visit the ER, the emergency medicine doctor will early control the pain and do not unnecessary image examination to reduce a length of stay at the ER.

• The Journal of Korean Physical Therapy
• /
• v.12 no.1
• /
• pp.73-78
• /
• 2000

The Sit-and-Reach Test (SRT) is commonly nea to assess flexibility of the spine and length of the hamstring muscle, The purpose of this study was to describe hamstring muscle length as reflected by use of the SRT, the Hip Joint Angle (HJA) and Sack length(from C7 to S2) in children, to examine the correlation between Back length, SRT and HJA measurements and to examine gender differences. The 162 subjects were participated without known musculoskeletal and neurological impairments of their spine or lower exeremities. In the Long-silting position, the Back length, SRT and HJA measurements were obtained. A mean Back length value of 46.2cm, a mean SRT value of 29.4cm and a mean HJA of 77,0 degrees were obtained including all subjects. There was a strong correlation between the SRT and HJA measurements (r=.66). There were a difference between boys and girls in Back(p=.0019) and HJA measurements (p=.015). The results of this study suggest that measurements for the SRT and HJA were correlated than Back. The HJA measurements guide treatment more effectively than do Back length and SRT measurements.

• Journal of the Korean Geotechnical Society
• /
• v.36 no.12
• /
• pp.69-76
• /
• 2020

Since the mechanically stabilized earth walls have a form of retaining wall compatible with a narrow section, the geogrid overlaps according to the separation distance between the walls. There is a problem that the overall behavior may occur in the state of being integrated with the stress change due to the interaction of the geogrid. Therefore, a careful approach is required at the design stage, but there are currently no design criteria or guidelines in Korea. This study investigated the optimal reinforcement length ratio according to the retaining wall width to height ratio (width to height ratio, Wb/H) for these back-to-back mechanically stabilized earth walls. Retaining wall width ratio is 1.1H, 1.4H, 1.7H, 2.0H for Case II of the FHWA design standard, and the height is 3.0 m, 5.0 m, 7.0 m, and 10.0 m, which are most commonly applied. Through numerical analysis, the appropriateness of the FHWA design standard and the optimal reinforcement length ratio according to the height of the retaining wall and the width of the retaining wall were proposed.