• 한국염색가공학회지
• /
• 제8권3호
• /
• pp.24-30
• /
• 1996

In order to investigate the light fastness of amino azo disperse dyes, some kinds of disperse dyes were prepared and dyed to polyester fabric under the different conditions, such as single or mixture state. After the dyed fabric was irradiated with carbon arc light for several hours, the color differences and K/S values of fabric were measured. The light fastness of amino azo disperse dye was decreased by the introduction of OH group to the dye molecule. But when the amino azo dye was mixed with the anthraquinone disperse dye, the light fastness was increased. It was considered that the dye molecules were aggregated on account of hydrogen bonding via OH groups, resulting the decrease of surface area of dye molecule which might be irradiated by the light.

• 한국염색가공학회지
• /
• 제21권6호
• /
• pp.46-55
• /
• 2009

Some phthalimidyl azo dyes containing N,N-diethyl or N,N-di($\beta$-methoxycarbonylethyl) group have been attempted to apply onto two kinds of polyurethane based materials and rationalize their dyeability and fastness comparing with those of some commercial disperse dyes. Phthalimidyl azo dye showed 66~98% of exhaustion yield at $120^{\circ}C$ by a conventional exhaust dyeing method. The dyeings were found to have a higher wash fastness with both fabrics in comparison with those of commercial dyes which indicates lower thermomigration and efficient alkali clearable properties of phthalimidyl ring and/or diester group during post-dyeing process.

• 한국염색가공학회지
• /
• 제18권5호
• /
• pp.15-21
• /
• 2006

Temporarily solubilized azo disperse dyes containing ${\beta}$-sulfatoethylsufonyl group were applied to acetate fabric and the feasibility of dispersant-free dyeing was investigated. The color yields of the dyes on acetate fabric were found to be dependent on dye bath pH as well as dyeing temperature. The optimum results were obtained at pH 6 and $80^{\circ}C$. The dyes showed good exhaustion and levelling properties. Vinylsulfone derivatives of the dyes were prepared and applied to acetate with dispersant. Dyeing properties of the temporarily solubilized disperse dyes were similar to or better than those of the vinylsulfone dyes. The dyes showed moderate to good fastness properties on acetate.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2007년도 추계학술발표회
• /
• pp.43-44
• /
• 2007

• Current Photovoltaic Research
• /
• 제5권2호
• /
• pp.43-46
• /
• 2017

Large absorption band shift has been observed for the azo-dye (disperse red-13, DR-13) attached on the surface of silica spheres. Urethane linkage has been utilized to form covalent bond between azo-dye (-OH) and 3-isocyanatopropyltriethoxysilane (ICPTES, -N=C=O). The synthesized ICPTES-DR-13 (ICPDR) molecules were attached to the silica spheres by the hydrolysis and condensation reaction. Although the absorption peak of DR-13 in methanol is at 510 nm, the absorption peak of the ICPDR-silica spheres shifts to 788 nm. The large absorption peak shift is due to the formation of intramolecular charge-transfer band with large aggregated ICPDR.

• 한국염색가공학회지
• /
• 제32권4호
• /
• pp.217-225
• /
• 2020

In this study, the dyeing characteristics of nylon fabric which is dyed with supercritical fluid were investigated. There were two dyes used in the dyeing experiment: C.I. Disperse Red 167 and C.I. Disperse Violet 93. Dyeing temperature, pressure, and leveling time were fixed at 110℃, 250bar, 60minutes, and the experiment was conducted with dyeing concentration of 0.1, 0.3, 0.5, and 0.85% o.w.f. The analysis of the experimental results was found out through the measurement of washing fastness and color coordinate. In addition, the calibration curve of each dye was drawn up and the amount of remaining dye was checked by measuring the absorbance of the residual dye. As a result of color difference measurement, as the concentration increased, the L⁎ value decreased and the K/S value increased. However, the increase in K/S value compared to the amount of input decreased as the concentration increased. The comparative experiment on the amount of residual dye(C.I. Disperse Red 167) in the pot showed that 99.14% of the amount was dyed at the concentration of 0.1% o.w.f, while it rapidly decreased to 77% at 0.85% o.w.f. C.I. Disperse Violet 93 dye also decreased from 0.5% o.w.f to 93.91%. In the washing fastness experiment of both dyes, the level of washing fastness began to decrease from samples dyed at 0.5% o.w.f. It may be because the simply absorbed dye was produced instead of completely being fixed in the amorphous region of the nylon fiber.

• 한국염색가공학회지
• /
• 제13권4호
• /
• pp.234-240
• /
• 2001

In order to improve the washing fastness of dyed polyester artificial suede fabric, it was dyed by using auto and anthraguinone type disperse dyes and treated with 3 different reduction clearing methods. The reduction clearing methods used in this study were normal alkaline reduction clearing, $N_2$ gas replacement method, and ultrasonic treatment during normal reduction clearing. The results were as followings ; The washing fastness property of dyed polyester artificial suede fabric was slightly improved by reduction clearing with $N_2$ gas replacement or with ultrasonic treatment comparing with normal alkaline reduction clearing. It was found that the use of $N_2$ gas replacement or ultrasonic treatment during reduction clearing eave effective removal of unfixed dyes on the fiber surface. We also obtained that the azo type disperse dye on polyester artificial fabric suede fabric showed higher wash fastness than anthraquinone type disperse dye.

• 한국염색가공학회지
• /
• 제33권1호
• /
• pp.10-23
• /
• 2021

In order to synthesize the dye suitable for supercritical carbon dioxide(ScCO2) dyeing, a series of azo based disperse dyes were prepared using various aniline derivatives as diazo components and indol derivatives as coupling components. Dyeing process in ScCO2 of the synthesized dyes was performed on PET fiber at 120℃ for 2 hrs under 250bar pressure with 0.5% o.w.f. of dye concentration. The absorption maxima varied from 400 to 580nm depending on the substituted groups in aniline derivatives and the indol derivatives. The dyes showed high molar extinction coefficients(ε) of 27,000~61,000M-1cm-1. Dyed PET fiber exhibited excellent brightness and good light, washing and perspiration(acid/alkali) fastness properties.

• 한국염색가공학회지
• /
• 제31권3호
• /
• pp.135-146
• /
• 2019

A series of azo based disperse dyes were synthesized and applied to polyester(PET) fiber in supercritical carbon dioxide($ScCO_2$). Various aniline derivatives were used as diazo component and coupled with glycine ethylester or carbonic acid ethylester derivatives to give azo based disperse dyes. Depending on the various diazo substituents, absorption maxima varied from 415 to 529nm in acetone. Dyeing in $ScCO_2$ was carried out at $120^{\circ}C$ and 250bar pressure for 2hrs with 0.5% o.w.f. of dye concentration. Dyed PET fiber had excellent brightness and good light, washing and perspiration(acid/alkali) fastness properties.

• 한국염색가공학회지
• /
• 제7권3호
• /
• pp.31-37
• /
• 1995

Effects of glycol pretreatment conditions such as concentration and molecular weight of glycols and dye types of different constitutions on the degree of transfer were investigated when transfer printed onto the cotton fabric with disperse dyestuffs. Obtained results are as follows ; 1. Although the degree of transfer increases linearly with temperature a time, above a certain critical point, they show decremental aspects for both of C.I. Disperse Orange 3 and C.I. Diperse Violet 1. 2. Degree of transfer increases with molecular weight of glycols, but PEG 200 which has a moleular weight 200 and boiling point of 300$^{\circ}C$ is more effcient than that of lower molecular weight. 3. Degree of tansfer for the C.I. Disperse Orange 3 having constitution of azo benzene type is somewhat higher than that of C.I. Disperse Violet 1 of amino anthraquinone.