• 대한기계학회논문집B
• /
• 제31권10호
• /
• pp.889-894
• /
• 2007

The effect of the axial slit of outer cylinder on Taylor-Couette flow was experimentally investigated. The radius ratio and aspect ratio of the model was 0.825 and 48, respectively. The depth of slits was 5mm and total 18 slits were azimuthally located along the inner wall of outer cylinder. We used PIV method to measure the flow field and applied refractive index matching method to resolve the image distortion due to the complex model geometry. The results showed the axial slit did not affect the transition from laminar Couette flow to Taylor vortex. The effect of slit wall appeared when the Reynolds number is larger than Re=143 and the slit model shows the transition to turbulent Taylor vortex flow above Re=143.

• 대한기계학회논문집B
• /
• 제20권4호
• /
• pp.1426-1436
• /
• 1996

The effectiveness of the regenerator pertaining to Stirling cycle machines is studied by analyzing the heat transfer characteristics of the oscillating flow in a tube, and a new consistent definition of the regenerator effectiveness can be expressed by the ratio of the heat transfer in axial direction (Q$\_$axial/) to that in transverse direction (Q/su w/), and its approximate form is obtained as a function of Nusselt number for practical utility. Since an approximate value of the ratio Q$\_$axial//Qsub w/ can be expressed in terms of the time-averaged rather than transient temperatures, this expression is useful to estimate the heat transfer coefficient in the Stirling machine regenerator experimentally.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 A
• /
• pp.9-11
• /
• 1999

This paper presents the problems of design and theoretical model of electrostatically driven axial-gap type wobble motor. The motor design benefits from large axial rotor-to-stator overlap and large gear ratios, and motor designs with rotor radii of 50 and $100{\mu}m$ are capable of generating torques in the [nNm] range at high electrostatic fields. Because of the large gear ratio, smaller angular steps and lower rotational speed are obtained, compared to radial-gap motor design. Aspects like gear ratio, torque generation, excitation schemes and torque coverage, normal forces, friction are addressed.

• 한국소음진동공학회논문집
• /
• 제17권12호
• /
• pp.1201-1207
• /
• 2007

The Timoshenko beam theories are used to model the rotating shaft. The nondimensional equations of motion for the rotating shaft subjected to moving mass and compressive axial forces are derived by using Hamilton's principle. Influence of system parameters such as the speed ratio. the mass ratio and the Rayleigh coefficient is discussed on the response of the moving system. The effects of compressive axial forces are also included in the analysis. The results are presented and compared with the available solutions of a rotating shaft subject to a moving mass and a moving load.

• 한국유체기계학회 논문집
• /
• 제2권1호
• /
• pp.88-95
• /
• 1999

This paper introduces the part of efforts to develop a derivative type turboshaft engine from an existing baseline engine for multi-purpose helicopters aiming at 4000 kg of take-off weight for 10-12 passengers. As a first step in meeting the development goal of increasing the output power from 720 hp to 840hp with minimum modification, a two stage axial compressor was redesigned to obtain the higher pressure ratio by removing the inlet guide vane and increasing the chord length. As a result, a two stage axial compressor was designed to facilitate a flow rate of 3.04 kg/s, a pressure ratio of 2.01 and an adiabatic efficiency of $85\%$. Its performance tests were carried out and verification of test results and redesign are under progress. Aerodynamic and structural analyses of the preliminary design are mainly described in this paper.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표대회 논문집(III)
• /
• pp.615-620
• /
• 1998

The objective of this experimental study is to investigate the hysteretic behavior of reinforced concrete piers subjected to quasi-static cyclic loads, which have been used in large numbers for railway and urban transportation facilities. Important test parameters are hoop ratio, axial load, loading type, and the behaviors f members have been evaluated through limit states of crack occurrence, yielding and ultimate state of member, ductility and load-deflection loop can be secured by considering the influence of hoop reinforcement ratio and axial load, and that plastic hinge length and ductility ar determined by the combination of the quantities of hoop reinforcement and axial load.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2000년도 가을 학술발표회논문집
• /
• pp.59-66
• /
• 2000

It is generally known that the lateral frequency( ω) of the vibration of a prismatic beam-column decreases according to the rele (equation omitted) (ω/sub 0/=natural frequency). In the cases of tapered members, the determination of P/ sub/ cr/(elastic critical load) and ω/ sub 0/ are not easy. Furthermore, the relationship between the compressive load and frequency can not be determined by the conventional analytical method. The axial force-frequency relationship of sinusolidally non-symmetrically tapered members with different shapes were investigated using the finite element method. To obtain the two eigenvalues, the axial thrust was increased step by step and the corresponding frequency was calculated. The result indicated that the axial thrust of the elastic critical load ratio and the square of the frequency ratio can be approximately represented in any case by a straight line. Finally, the linear relationship is also applicable to the sinusolidally non-symmetrically tapered member.

• 한국통신학회논문지
• /
• 제40권8호
• /
• pp.1622-1630
• /
• 2015

본 연구에서는 원형편파를 양방향으로 복사하는 등각 스파이럴 안테나에 EBG(electromagnetic bandgap) 반사판을 사용하여 단일 방향으로 복사가 발생하게 하였다. EBG 반사판에서 스파이럴 암 까지의 높이가 가장 낮은 동작 주파수의 0.07 파장 높이로 한 경우, 원형편파의 축비가 손상되는 것이 발생하였다. 본 논문에서는, +z 방향에서의 동일 편파인 우선 원형 편파를 발생시키는 $E_{\theta},E_{\phi}$의 크기와 시간 위상차를 해석하여, 전 주파수 영역에서 축비를 개선하는 조건을 제시하였다. 그 결과, 3 ~ 10[dB] 주파수 범위에서 축비는 3[dB] 이하이고, 이득은 자유공간에서의 양방향 복사와 비교해서 약 3[dB] 정도 개선되었고, $S_{11}$은 전 주파수 영역에서 -10[dB]이하를 얻었다.

• 한국전자파학회논문지
• /
• 제10권7호
• /
• pp.998-1009
• /
• 1999

본 논문에서는 X 밴드 주파수에서 단얼 마이크로스트립 선로 급전방식을 갖는 원형 편파 개구면-패치 안테나(aperture-patch antenna) 및 환 구조 안테나(ring antenna)를 설계, 제작하여 특성을 측정하였다. 개구면-패치 안테나는 동작 대역폭이 매우 넓으며, 환 구조 안테나는 크기가 작아서 대형 배열안테나의 기본 복사소자로 적합하다. 이 두 종류의 안테나에 대하여 VSWR 대역폭과 원형편파 축비(axial ratio)를 개선하기 위한 여러 가지 설계 파라미터의 영향을 분석하였다. 개구면과 환 복사소자는 공진기 모델(cavity mode!)에 근거하여 초기 설계를 하였으며. 원형편파를 발생시키기 위한 개구면 내부의 패치와 환 내부의 스터브(stub) 는 Ensemble 소프트웨어를 사용하여 최적화 하였다. 제작된 안테나는 개구면-패치 안테나의 경우 25 %의 V VSWR 대역폭(3dB 기준)과 1.2 dB의 최소 축비를 가지며, 환 구조 안테나에서는 6.7 %의 VSWR 대역폭과 1.6 dB의 최소 축비를 가진다.

• 한국수학교육학회지시리즈E:수학교육논문집
• /
• 제28권2호
• /
• pp.281-302
• /
• 2014

우리는 본 연구에서 황금비의 역사, Markowsky의 황금비 판단 기준, 그리고 황금비에 대한 오해를 알아보았다. 쿠푸왕의 대 피라미드에는 황금비가 존재하지 않는다는 Markowsky의 주장에 반하여 필자는 황금비의 존재를 주장하였다. 초 중등 교과서와 수학사 관련 국내 출판 책자에서는 황금비의 예로 쿠푸왕의 대 피라미드와 파르테논 신전을 사용하고 있는데 이에 대한 잘못된 서술을 알아보고 황금비 지도의 대안으로 동적 조화 입장에서 현대 산업 디자인, 항공공학, 건축 디자인, 스크린 디자인 등의 예를 제시하였다. 또한, 기축시대가 우리나라 학교수학에 미친 영향을 탈레스와 황금비 중심으로 알아보았다.