• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.695-700
• /
• 2000

The dynamic stability of spinning beam with free boundary conditions for both edges subjected to a tip follower force $P_0+P_1cos{\Omega}t$ is analyzed. It is studied that the beam has a concentrated mass. and then the effects of the axial locations of the mass are studied. The beam is modelled with the Timoshenko type shear deformations. The Hamilton's principle is used to derive the equations of motion, and the critical spinning speed of a beam subjected to a follower force with various non-dimensional parameters is investigated. The finite elements are used with $C^0$ continuity to analyze the spinning beam model, and the method of multiple scales is tried to investigate the dynamic instability regions. The governing equations of motion involve periodic coefficients, which are not in the form of standard Mathieu-Hill equations. The result shows that the concentrated mass increases the dynamic stability of the spinning free-free beam subjected to a thrust.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.874-882
• /
• 2008

In a domestic, HSR-350x which has the maximum speed 350km/h was developed and then next, the next generation high speed train which has the maximum speed 400km/h has still been developing. With developing the next generation high speed railway, there need to be a general plan to make sure of dynamic safety though the a study on the crack and failure of rail by rolling contact fatigue. Therefore, this study investigated occurring stress of rail according to the track quality, train velocity, wheel radius, track stiffness, distance between sleepers, axial force using Eisenmann's equations. For the more, via the finite element method, it investigated shear force on the rail head which could be changed by the early crack length, angle and temperature. As a result, this study confirmed the main elements which effect on the fatigue life cycle of rail.

• 대한조선학회지
• /
• 제24권3호
• /
• pp.43-51
• /
• 1987

In this paper, dynamic elastic, plastic response of beam-columns is analysed using discrete models. composed of rigid bars and springs. The equation of motion is formulated including the shear deformation effect, and the stress change of yielding points is calculated with various yielding criteria. The effect of initial axial force is considered by two ways: (1) including the effect in interaction curve only. (2) including the effect directly in the equation of motion in terms of initial stiffness method is also used in nonlinear interaction procedure. It is found that this model is very effective in analysing not only the plastic response but the elastic response, and present method is more efficient than Finite Element Method from the viewpoint of calculation time and accuracy.

• 콘크리트학회논문집
• /
• 제12권5호
• /
• pp.121-130
• /
• 2000

Currently, in evaluating a flexural strength of a concrete member, the effect of specimen depth has not been systematically studied, even though its effect on ultimate strength of a section is very important. For all types of loading conditions, the trend is that the strength of a member tends to decrease when the member depth increases. In this study, the influence of specimen depth on flexural compressive strength of concrete member was examined experimentally. A series of C-shaped specimens subjected to axial compressive force and bending moment were tested using three geometrically similar specimens with different length-to depth ratios (h/c = 1, 2 and 4) which have compressive strength of 55 MPa. The results indicate that the flexural compressive strength decreased as the specimen depth increased. A model equation was derived based on regression analyses of the experimental data. Also, the results show that ultimate strain decreases as the specimen depth increases. Finally, a general model equation for the depth effect is proposed.

• Structural Engineering and Mechanics
• /
• 제15권1호
• /
• pp.71-81
• /
• 2003

The governing differential equation for buckling of a one-step bar with the effect of shear deformation is established and its exact solution is obtained. Then, the exact solution is used to derive the eigenvalue equation of a multi-step bar. The new exact approach combining the transfer matrix method and the closed form solution of one step bar is presented. The proposed methods is convenient for solving the entire and partial buckling of one-step and multi-step bars with various end conditions, with or without shear deformation effect, subjected to concentrated axial loads. A numerical example is given explaining the proposed procedure and investigating the effect of shear deformation on the critical buckling force of a multi-step bar.

• 한국구조물진단유지관리공학회 논문집
• /
• 제28권1호
• /
• pp.1-11
• /
• 2024

이 논문의 목적은 붕괴방지수준의 지진력을 적용한 콘크리트 댐 피어부 동적해석 시 합리적인 댐 축방향 지진하중 재하 방법, 내하력 평가 방법 등에 대한 적용방안을 제시하는 것이다. 이를 위하여 콘크리트 댐 피어부를 대상 시설로 선정하여 다양한 위어부 폭을 적용한 동적해석을 통해 위어부 댐 축방향 동적거동 특성을 분석하고 'U.S. Army Corps, 2007'제시하는 RC수력구조물 평가기법을 적용하여 내하력 평가를 수행하였다. 연구결과 피어부 댐 축방향 지진력 적용 시 위어부 댐 축방향은 강체거동으로 가정하는 것이 보다 현실적이고 'U.S. Army Corps, 2007'에서 제시하는 모멘트와 전단에 대한 내하력 검토방법이 합리적인 것으로 판단되므로 현행 평가방법의 개선이 필요한 것으로 결과가 도출되었다. 연구 결과 개선사항을 적용할 경우 CLE를 적용한 현행 내진성능평가 방법보다 합리적인 평가결과를 도출하는 효과가 있을 것이다. 피어부에 발생하는 비틀림 모멘트에 대해서는 향후 추가적인 연구가 필요한 것으로 판단된다.

• 대한기계학회논문집B
• /
• 제37권7호
• /
• pp.675-682
• /
• 2013

전단 동축 분사기의 Inner-stage와 Outer-stage의 기체 분사 비율 변화에 따른 축방향 유동 분포 특성과 분무 분열 특성을 실험적으로 연구였다. 무차원 측정 거리를 Z/d=100까지 변화시킴에 따라 운동량 교환, 공기역학적 항력, 점성 혼합의 영향으로 완전 발달된 유동의 형태를 나타내었다. Inner-stage의 기체분사와 Outer-stage의 기체 분사의 영향은 Z/d=5 이내의 영역에서 간섭받지 않고 분무 초기에 Inner-stage에서 분사된 기체 전단력에 의해 분열됨을 파악할 수 있었으며, Z/d=10 이상의 영역에서 완전 발달된 유동으로 변화하며, 유동의 혼합이 진행됨을 관찰 할 수 있었다. Inner-stage의 운동량 플럭스 비 0.84 이내에서 Outer-stage의 운동량 플럭스 비가 증가함에 따라 SMD가 감소하는 경향을 나타내었으며, Inner-stage의 운동량 플럭스 비가 1.38 이상의 조건에서 SMD의 분포가 유사하게 나타나는 경향을 관찰할 수 있었다.

• Geomechanics and Engineering
• /
• 제24권4호
• /
• pp.389-397
• /
• 2021

Pile foundation is a typical form of bridge foundation and viaduct, and large-diameter rock-socketed piles are typically adopted in bridges with long span or high piers. To investigate the effect of a mountain slope with a deep overburden layer on the bearing characteristics of large-diameter rock-socketed piles, four centrifuge model tests of single piles on different slopes (0°, 15°, 30° and 45°) were carried out to investigate the effect of slope on the bearing characteristics of piles. In addition, three pile group tests with different slope (0°, 30° and 45°) were also performed to explore the effect of slope on the bearing characteristics of the pile group. The results of the single pile tests indicate that the slope with a deep overburden layer not only accelerates the drag force of the pile with the increasing slope, but also causes the bending moment to move down owing to the increase in the unsymmetrical pressure around the pile. As the slope increases from 0° to 45°, the drag force of the pile is significantly enlarged and the axial force of the pile reduces to beyond 12%. The position of the maximum bending moment of the pile shifts downward, while the magnitude becomes larger. Meanwhile, the slope results in the reduction in the shaft resistance of the pile, and the maximum value at the front side of the pile is 3.98% less than at its rear side at a 45° slope. The load-sharing ratio of the tip resistance of the pile is increased from 5.49% to 12.02%. The results of the pile group tests show that the increase in the slope enhances the uneven distribution of the pile top reaction and yields a larger bending moment and different settlements on the pile cap, which might cause safety issues to bridge structures.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회논문집(I)
• /
• pp.115-120
• /
• 2000

Currently, in evaluating a flexural strength of a concrete member, the effect of specimen depth has not been systematically studied, even though its effect on ultimate strength of a section is very important. For all types of loading conditions, the trend is that the strength of a member tends to decrease when the member depth increases. In this study, the influence of specimen depth on flexural compressive strength of concrete member was examined experimentally. A series of C-shaped specimens subjected to axial compressive force and bending moment were tested using three geometrically similar specimens with different length-to-depth ratios(h/c=1, 2 and 4) which have compressive strength of 55MPa. The results indicate that the flexural compressive strength decreased as the specimen depth increased. A model equation was derived based on regression analyses of the experimental data. Also the results show that ultimate strain decreases as the specimen depth increases. Finally, a general model equation for the depth effect is proposed.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2006년도 정기 학술대회 논문집
• /
• pp.141-148
• /
• 2006

Concrete in a CFT(Concrete Filled Tube) column has enhanced strength and ductility because it is triaxially confined by a steel tube. But CFT columns are designed based on linear analyses by stress block method without the confining effect or the nonlinearity of the concrete. These make the significantly difference between the analysis results and the experimental results. Thus in this study, a nonlinear CFT column model was developed considering the confining effect on the concrete in a CFT column. This developed model was verified by experimental results from other researchers and compared with the results of various specifications. With the developed model, parametric studies were performed and the developed column model showed reasonable and accurate results.