• 대한안과학회지
• /
• 제59권11호
• /
• pp.1009-1016
• /
• 2018

목적: 중등도 이하 소아 근시에서 안경과 각막굴절교정렌즈(orthokeratology lens, OK) 착용이 안축장 성장에 미치는 영향 및 관련인자를 알아보고자 하였다. 대상과 방법: 2013년부터 2015년까지 내원한 6세에서 13세 사이 -4.50디옵터 이하의 구면렌즈대응치를 가진 소아 100명을 대상으로 후향적으로 OK군(75안)과 안경군(64안) 간에 안축장 변화와 안축장과 관계된 인자들을 분석하였다. 결과: 안축장 변화는 1년째에 OK군이 $0.24{\pm}0.29mm$의 증가를, 안경군이 $0.42{\pm}0.20mm$의 증가를 보였으며, OK군에서 안경군에 비해 유의하게 안축장 성장이 억제되는 양상을 보였다(Mann-Whitney U test, p<0.05). OK군에서 처음 착용한 나이만이 안축장 변화와 음의 상관관계가 있는 것으로 나타났다(Pearson's correlation, r=-0.481, p<0.05). 안경군에서는 처음 착용한 나이가 안축장 변화와 음의 상관관계(Pearson's correlation, r=-0.462, p<0.05)를, 그 외에 현성굴절검사의 초기 구면렌즈대응치 및 초기 구면렌즈값, 난시값은 안축장 변화와 양의 상관관계를 보였다. 안축장 변화를 비교해 보았을 때 OK를 착용한 경우 6세 이상 9세 미만군(28안)에 비해 9세 이상 13세 이하군(47안)에서 유의하게 안축장 성장이 더 억제되는 양상을 보였다(Mann-Whitney U test, p<0.05). 결론: OK 착용은 안경 착용에 비해 효과적으로 안축장의 성장을 억제할 수 있으며, 9세 이상 13세 이하의 소아에서도 효과적인 안축장 성장 억제가 가능하다.

• Nuclear Engineering and Technology
• /
• 제54권5호
• /
• pp.1579-1587
• /
• 2022

The effects of hydride amount (20-850 wppm), orientation (circumferential and radial), and temperature (room temperature, 100 ℃, 200 ℃) on the axial mechanical properties of Zircaloy-4 cladding were comprehensively examined. The fraction of radial hydride fraction in the cladding was quantified using PROPHET, an in-house radial hydride fraction analysis code. Uniaxial tensile tests (UTTs) were conducted at various temperatures to obtain the axial mechanical properties. Hydride orientation has a limited effect on the axial mechanical behavior of hydrided Zircaloy-4 cladding. Ultimate tensile stress (UTS) and associated uniform elongation demonstrated limited sensitivity to hydride content under UTT. Statistical uncertainty of UTS was found small, supporting the deterministic approach for the load-failure analysis of hydrided Zircaloy-4 cladding. These properties notably decrease with increasing temperature in the tested range. The dependence of yield strength on hydrogen content differed from temperature to temperature. The ductility-related parameters, such as total elongation, strain energy density (SED), and offset strain decrease with increasing hydride contents. The abrupt loss of ductility in UTT was found at ~700 wppm. Demonstrating a strong correlation between total elongation and offset strain, SED can be used as a comprehensive measure of ductility of hydrided zirconium alloy.

• 콘크리트학회논문집
• /
• 제25권1호
• /
• pp.19-28
• /
• 2013

소성힌지 구역의 축방향변형률의 예측은 지진하중을 받는 철근콘크리트 기둥의 합리적인 연성 평가를 위하여 필요한 항목이다. 축방향변형률은 콘크리트의 유효압축강도를 저하시키고 층간 변위를 크게 할 수 있다. 기존 연구는 주로 소성힌지가 발생하는 보의 축방향변형률 예측에 국한되었지만 횡력을 받는 구조물에서는 저층부 기둥도 소성힌지가 발생한다. 이 논문에서는 기둥 부재에 작용하는 축력의 크기에 따라 변화하는 축방향변형률을 예측할 수 있는 모델과 평가식이 제안되었다. 단면 해석법을 이용하여 하중이력에 따른 축방향변형률의 변화와 철근의 변형률 변화를 고찰한 후, 해석과 실험 결과를 근거로 축방향변형률 예측 모델을 제안하였다. 제안된 모델은 부재 축방향변형률을 3가지 경로(재하, 재하 후 반대하중이 하중이 가해지는 구간, 동일한 부재 회전각에서 반복하중을 받을 구간)로 구분하였다. 이 연구에서 제안된 기둥 부재의 축방향변형률의 계산식은 축력비가 다른 철근콘크리트 기둥의 실제 축방향변형률을 추적하였고, 축력비의 영향을 반영하였다.

• 오토저널
• /
• 제10권3호
• /
• pp.38-44
• /
• 1988

It is important to control the axial forces of high tension bolts such as the automobile, construction machine, aircraft, marine engine bolts. However, the direct method to measure the axial forces of bolts practically have not been found out. The ultrasonic techniques is based on the principles that the bolt tensile elongation and ultrasonic velocity changes are proportional to the axial force below the yield point of the materials. From the result of the experiment, the coefficient of acoustoelasticity k could be measured as - 11.18*10$_{-5}$m $m^{2}$k $g_{f}$./.

• Journal of Korean Neurosurgical Society
• /
• 제64권3호
• /
• pp.359-366
• /
• 2021

Neuromesodermal progenitors (NMPs) constitute a bipotent cell population that generates a wide variety of trunk cell and tissue types during embryonic development. Derivatives of NMPs include both mesodermal lineage cells such as muscles and vertebral bones, and neural lineage cells such as neural crests and central nervous system neurons. Such diverse lineage potential combined with a limited capacity for self-renewal, which persists during axial elongation, demonstrates that NMPs are a major source of trunk tissues. This review describes the identification and characterization of NMPs across multiple species. We also discuss key cellular and molecular steps for generating neural and mesodermal cells for building up the elongating trunk tissue.

• Computers and Concrete
• /
• 제2권2호
• /
• pp.147-164
• /
• 2005

This paper summarizes an experimental study on the seismic behavior of lower stories of a mid-rise reinforced concrete frame building. Two reinforced concrete frames with two stories and one span were tested and each frame represents lower two stories of an 11-story RC frame building. Both frames were designed in accordance with Japanese design guidelines and were identical except in the variation of axial force. The tests demonstrated that the overall load-displacement relations of the two frames were nearly the same and the first-story column shear was closely related to the column axial load. The columns and beams elongated during both of the tests, with the second-floor beam elongation exceeding 1.5% of the beam clear span length. The frame with higher axial loads developed more cracks that the frame under moderate axial load.

• 비파괴검사학회지
• /
• 제12권4호
• /
• pp.26-31
• /
• 1993

In this paper, the axial force of high tension bolt is measured by using ultrasonic wave. In the case of the different materials the conclusion obtained are as follows : (1) The relation of the material quality of each high tension bolt and form(diameter or section area), and yield axial force can be observed. (2) As 0.1 is devided by the apparent elongation the measurement accuracy of high tension bolt can be achived. Also, it is founded that the Joint axial force of high tension bolt is determined by the yield force.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 춘계학술대회논문집
• /
• pp.163-170
• /
• 1999

Although the bulge forming technique is currently employed in commercial superplastic forming processes, the uniaxial tensile test is still the most commonly used method for the evaluation of the superplasticity of materials due to its simplicity in testing. However, the results obtained from the uniaxial tensile test can not be applied in analyzing the characteristics of the real parts formed in multi-axial stress state. In this paper, using the tensile test specimen obtained from the square cup manufactured by superplastic forming, tensile strength and elongation have been investigated according to the strain and cavity volume fraction. From the result of experiment, tensile strength and elongation are decreased according to the strain and cavity in Al-6%Cu-0.4%Zr alloy. On condition of uniaxial stress, cavity volume fraction is increased on linear according to the increasement of thickness strain. However, on condition of biaxial stress there are critical point( E t=1.5-1.6) that the slope, the ratio of cavity volume fraction and strain, have been changed. Therefore, cavity volume fraction is different with respect to stress condition, although the same strain.

• Structural Engineering and Mechanics
• /
• 제4권3호
• /
• pp.330-344
• /
• 1996

A model of a cable comprising interacting wires with dry friction forces at the interfaces is subjected to a quasi-static cyclic loading. The first cycle of this process, comprising of axial loading, unloading and reloading is investigated analytically. Explicit load-elongation relationships are obtained for all of the above phases of the cycle. An expression for the hysteretic losses is also obtained in an explicit form. It is shown that losses are proportional to the third power of the amplitude of the oscillating axial force, and are in inverse proportion to the interwire friction forces. The results obtained are used to introduce a model of a cable as a solid rod with an equivalent stiffness and damping properties of the rod material. It is shown that the stiffness of the equivalent rod is weakly nonlinear, whereas the viscous damping coefficient is proportional to the amplitude of the oscillation. Some numerical results illustrating the effect of cable parameters on the losses are given.

• 공학논문집
• /
• 제6권1호
• /
• pp.53-63
• /
• 2004

본 연구에서는 지진하중을 받는 철근콘크리트 교각의 지진성능 및 파괴모드에 전단이 미치는 영향을 조사하였다. 본 연구에서 개발된 전단-축력간의 상호거동 이력응답 모델의 검증을 위하여 철근콘크리트 기둥 실험에 대한 비교해석을 수행하였다. 비교결과, 예측된 해석치는 전단에 관한 하중-변위 이력응답에 있어서 실험결과와 좋은 상관관계를 보여주었다. 아울러, 본 연구에서 개발된 모델을 이용하여 고베 지진에 의해서 손상된 철근콘크리트 교량의 비선형 시간이력 해석을 수행하였다. 교각의 변위응답에 관한 분석결과, 축력의 변화를 고려한 전단의 영향으로 인하여 최대변위가 상당히 증가하였고, 전반적인 교각 강성의 감소와 함께 진동주기의 증가를 유발한다는 것을 알 수 있었다. 따라서 전단과 축력의 영향을 동시에 고려한 응답에 철근콘크리트 교각의 지진손상 평가에 관해서 보다 나은 설명을 제공할 수 있을 것으로 사료된다.