• 제어로봇시스템학회논문지
• /
• 제16권11호
• /
• pp.1038-1043
• /
• 2010

In this paper, an adaptive sliding-mode formation control and collision avoidance are proposed for electrically driven nonholonomic mobile robots with model uncertainties and external disturbances. A sliding surface based on the leader-follower approach is developed to achieve the desired formation in the presence of model uncertainties and disturbances. Moreover, by using the collision avoidance function, the mobile robots can avoid the obstacles successfully. Finally, simulations illustrate the effectiveness of the proposed control system.

• 한국정밀공학회지
• /
• 제28권8호
• /
• pp.951-958
• /
• 2011

In this paper, the purpose is to investigate the vibration characteristics and the design of resonance avoidance of the unmanned helicopter master. Based on the Euler-Bernoulli beam theory for helicopter master, the equation of motion is derived by using extended Hamilton's principle. It was studied about the natural frequency of helicopter master as the design variances(tip mass, length and diameter of master). Also, it was compared the theoretical results for natural frequency with the results of FE analysis. The results of this study showed the vibration characteristics of helicopter master for the design of resonance avoidance.

• 한국자동차공학회논문집
• /
• 제22권3호
• /
• pp.241-249
• /
• 2014

This paper presents a path planning algorithm of an autonomous vehicle (ADAM III) for collision avoidance in the presence of multiple obstacles. Under the requirements that a low-cost GPS is used and its computation should be completed with a sampling time of sub-second, heading angle estimation is proposed to improve performance degradation of its measurement and a hierarchical structure for path planning is used. Once it is decided that obstacle avoidance is necessary, the path planning consists in three steps: waypoint generation, trajectory candidate generation, and trajectory selection. While the waypoints and the corresponding trajectory candidates are generated based on position of obstacles, the final desired trajectory is determined with considerations of kinematic constraints as well as an optimal condition in a term of lateral deviation. Finally the proposed algorithm was validated experimentally through field tests and its demonstration was performed in Autonomous Vehicle Competition (AVC) 2013.

• 한국컴퓨터정보학회논문지
• /
• 제23권6호
• /
• pp.33-41
• /
• 2018

This study examined the work - family relationship of married women in the digital age centered on avoidance of childbirth. Married women 's age, education level, family members living together, work - family affects the avoidance of childbirth. Also, it is analyzed that similar childbirth avoidance phenomenon occurs in the result of the number of future children. Based on the results of the research, it can be suggested that the support of the family living together, the stable employment of married women, and the family-friendly incentive system will have a positive effect on childbirth.

• 로봇학회논문지
• /
• 제3권3호
• /
• pp.186-193
• /
• 2008

We propose a novel real-time obstacle avoidance method for rescue robots. This method, named the ELA(Emergency Level Around), permits the detection of unknown obstacles and avoids collisions while simultaneously steering the mobile robot toward safe position. In the ELA, we consider two sensor modules, PSD(Position Sensitive Detector) infrared sensors taking charge of obstacle detection in short distance and LMS(Laser Measurement System) in long distance respectively. Hence if a robot recognizes an obstacle ahead by PSD infrared sensors first, and judges impossibility to overcome the obstacle based on driving mode decision process, the order of priority is transferred to LMS which collects data of radial distance centered on the robot to avoid the confronted obstacle. After gathering radial information, the ELA algorithm estimates emergency level around a robot and generates a polar histogram based on the emergency level to judge where the optimal free space is. Finally, steering angle is determined to guarantee rotation to randomly direction as well as robot width for safe avoidance. Simulation results from wandering in closed local area which includes various obstacles and different conditions demonstrate the power of the ELA.

• 한국ITS학회 논문지
• /
• 제13권5호
• /
• pp.27-34
• /
• 2014

본 논문은 무선 채널을 노드에게 할당하여 보장하는 GTS 기반의 무선 센서 네트워크에서 다수의 노드가 같은 채널을 공유할 때, 충돌이 발생하는 것을 최대로 억제하기 위한 방안을 제시한다. 무선 자원이 충분하지 않은 조건에서 다수의 노드에게 특정 채널을 같이 할당하고, 할당한 채널을 노드들이 공유하면서 데이터를 전송한다. 데이터 전송 시, 한개 이상의 노드들이 채널을 이용하면 충돌이 발생한다. 이러한 충돌을 효과적으로 줄이기 위해, 부모가 자식 노드들에게 백오프 값들을 지정하고, 그래도 충돌이 생기는 경우, 백오프 값 변경을 시도하여 충돌을 방지한다. 제안 방안을 시뮬레이션을 통해 제안 방안이 효과적으로 백오프 값을 조절하여 충돌이 많이 감소함을 확인할 수 있었다.

• 제어로봇시스템학회논문지
• /
• 제18권10호
• /
• pp.928-933
• /
• 2012

In this paper, the IR and compass sensors for the underwater system were used. The walls of the water tank have been recognized and avoided treating the walls as obstacles by the bio-mimetic underwater robot. This paper is consists of two parts: 1.The hardware part for the IR and compass sensors and 2.The software part for obstacle avoidance algorithm while the bio-mimetic robot is swimming with the obstacle recognition. Firstly, the hardware part controls through the RS-485 communications between a microcontroller and the bio-mimetic underwater robot. The software part is simulated for obstacle recognition and collision avoidance based upon the data from IR and compass sensors. Actually, the bio-mimetic underwater robot recognizes where is the obstacle as well as where is the bio-mimetic robot itself while it is moving in the water. While the underwater robot is moving at a constant speed recognizing the wall of water tank as an obstacle, an obstacle avoidance algorithm is applied for the wall following swimming based upon the IR and compass sensor data. As the results of this research, it is concluded that the bio-mimetic underwater robot can follow the wall of the water tank efficiently, while it is avoiding collision to the wall.

• 한국해양공학회지
• /
• 제30권5호
• /
• pp.426-430
• /
• 2016

Recently, many unmanned surface vehicles (USVs) have been developed and researched for various fields such as the military, environment, and robotics. In order to perform purpose specific tasks, common autonomous navigation technologies are needed. Obstacle avoidance is important for safe autonomous navigation. This paper describes a vector field histogram+ (VFH+) based obstacle avoidance method that uses the monocular vision of an unmanned surface vehicle. After creating a polar histogram using VFH+, an open space without the histogram is selected in the moving direction. Instead of distance sensor data, monocular vision data are used for make the polar histogram, which includes obstacle information. An object on the water is recognized as an obstacle because this method is for USV. The results of a simulation with sea images showed that we can verify a change in the moving direction according to the position of objects.

• 전기학회논문지
• /
• 제68권3호
• /
• pp.480-488
• /
• 2019

In this paper, we propose an obstacle avoidance system for an unmanned ship to navigate safely in dynamic environments. Also, in this paper, one-dimensional low-cost lidar sensor is used, and a servo motor is used to implement the lidar sensor in a two-dimensional space. The distance and direction of an obstacle are measured through the two-dimensional lidar sensor. The unmanned ship is controlled by the application at a Tablet PC. The user inputs the coordinates of the destination in Google maps. Then the position of the unmanned ship is compared with the position of the destination through GPS and a geomagnetic sensor. If the unmanned ship finds obstacles while moving to its destination, it avoids obstacles through a fuzzy control-based algorithm. The paper shows that the experimental results can effectively construct an obstacle avoidance system for an unmanned ship with a low-cost LiDAR sensor using fuzzy control.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제13권1호
• /
• pp.340-350
• /
• 2021

This paper proposes a decision support model for USVs to improve the accuracy of collision avoidance decision-making. It is formed by Navigation Safety Domain (NSD) and domain-based Collision Risk Index (CRI), capable of determining the collision stage and risk between multiple ships. The NSD is composed of a warning domain and a forbidden domain, which is constructed under the constraints of COLREGs (International Regulations for Preventing Collisions at Sea). The proposed domain based CRI takes the radius of NSD in various encounter situations as threshold parameters. It is found that the value of collision risk in any directions can be calculated, including actual value and risk threshold. A catamaran USV and 6 given vessels are taken as study objects to validate the proposed model. It is found that the judgment of collision stage is accurate and the azimuth range of risk exists can be detected, hence the ships can take direct and effective collision avoidance measures. According to the relation between the actual value of CRI and risk threshold, the decision support rules are summarized, and the specific terms of COLREGs to be followed in each encounter situation are given.