• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.638-643
• /
• 2001

Macroporous pellets were prepared from industrial waste flyash by foaming method. The surface and inside of flyash pellets, the shape was almost spherical and the average size was about 3 mm, were composed of the spherical pores interconnected through windows. The controlling of pellet size was conducted with solid loading. The flyash pellets with different relative density were characterized for porosity, average pore size, and specific surface area. As results, most physical properties had a tendency to increase as relative density decreased - extension ratio increased. The correlation between relative density and other properties was inspected through microstructural features evaluated by SEM. As a result, high porosity and high specific surface area were estimated to result from the superior connectivity between pores.

• 한국세라믹학회지
• /
• 제40권1호
• /
• pp.5-10
• /
• 2003

Porous barium-strontium titanate ceramics were fabricated by adding corn- or potato-starch (are referred to as starch). The effect of sintering temperature on the microstructure and electrical properties of the porous ceramics was investigated. The room-temperature electrical resistivity of the barium-strontium titanate ceramics decreased with sintering temperature. The porosity and pore size were decreased and the grain size was increased with increasing the sintering temperature. The porosity and grain size of the barium-strontium titanate ceramics with corn-starch sintered at 1300 and 1450$^{\circ}C$ were 28.5, 22.6% and 3.2, 6.2 $\mu\textrm{m}$, respectively. The average pore sizes of the barium-strontium titanate ceramics with corn-starch sintered at 1300, 1400 and 1450$^{\circ}C$ were 0.5, 0.3 and 0.2 $\mu\textrm{m}$, respectively. The decrease in the room-temperature resistivity with increasing sintering temperature is attributed mainly due to the increase of grain size and the decrease of the electrical barrier height of grain boundaries as well as the partial decrease of porosity.

• 한국세라믹학회지
• /
• 제40권12호
• /
• pp.1213-1219
• /
• 2003

비정질알루미나에 기공형성제를 첨가하여 성형하고 수열반응, 열처리 및 수세를 통해 pellet 형태의 다공성 세라믹 담체를 제조하였다. 기공형성제는 64, 222, 405 $\mu\textrm{m}$의 평균 입경을 가지는 활성탄, 폴리머와 무기염의 변화를 두었으며, 20$0^{\circ}C$에서 24시간동안 수열반응 한 다음 $650^{\circ}C$에서 5시간동안 열처리 및 8$0^{\circ}C$에서 48시간 동안 수세하고, 결정의 생성 및 변화, 기공률, 기공의 분포 및 압축 강도를 측정하였다. 수열반응 이후 활성탄이 첨가된 시편은 boehmite로의 상전이가 이루어졌으나, 기공형성제로 폴리머 및 무기염이 첨가된 시편은 수열 반응 시 비정질알루미나의 aquohydroxy complex gel의 형성을 방해하여 boehmite 결정성장 억제를 가져왔다 활성탄을 기공형성제로 첨가하여 제조한 시편의 경우, 70% 이상의 기공률과 40kgf/$\textrm{cm}^2$ 이상의 강도를 갖는 ${\gamma}$-알루미나의 담체를 제조할 수 있었다.

• 한국자기공명학회논문지
• /
• 제4권1호
• /
• pp.50-63
• /
• 2000

Titanium dioxide particles with three different average sizes, prepared by three different methods, were incorporated into silica gel pores by impregnation. The titanium dioxide incorporated into the silica gel pores was photoionized by 240-400 nm irradiation at 77 K by a one-photon process to from trapped hole centers on OH group and trapped electron centers on titanium which were detected by electron paramagnetic resonance at 77 K. During the impregnation the smallest size range of TiO2 particles can be incorporated into silica gels with 2.5-1.5 nm pores. However, the largest size range of TiO2 particles can only be incorporated into silica gels with 6-15 nm pores and not into silica gels with 2.5-4 nm pores. The photoyield and stability of photoinduced hole and electron centers depends on the silica pore sizes of silica gels and surface area as well as on the TiO2 loading. In large pore silica gels and large particle size of TiO2, photoinduced charge separation reaches to a plateau at shorter irradiation times and the trapped hole and electron centers are more stable to decay.

• Carbon letters
• /
• 제20권
• /
• pp.1-9
• /
• 2016

Activated carbon was synthesized from coconut shells. The Brunauer, Emmett and Teller surface area of the synthesized activated carbon was found to be 1640 m²/g with a pore volume of 1.032 cm³/g. The average pore diameter of the activated carbon was found to be 2.52 nm. By applying the size-strain plot method to the X-ray diffraction data, the crystallite size and the crystal strain was determined to be 42.46 nm and 0.000489897, respectively, which indicate a perfect crystallite structure. The field emission scanning electron microscopy image showed the presence of well-developed pores on the surface of the activated carbon. The presence of important functional groups was shown by the Fourier transform infrared spectroscopy spectrum. The adsorption of methyl orange onto the activated carbon reached 100% after 12 min. Kinetic analysis indicated that the adsorption of methyl orange solution by the activated carbon followed a pseudo-second-order kinetic mechanism (R² > 0.995). Therefore, the results show that the produced activated carbon can be used as a proper adsorbent for dye containing effluents.

• 대한치과기공학회지
• /
• 제37권2호
• /
• pp.57-62
• /
• 2015

Purpose: This study was performed to investigate mechanical properties of the porous Ti implants according to porosity. Porous Ti implant will be had properties similar to human bone such as microstructure and mechanical properties. Methods: Porous Ti implant samples were fabricated by sintering of spherical Ti powders(below $25{\mu}m$, $25{\sim}32{\mu}m$, $32{\sim}38{\mu}m$, and $38{\sim}45{\mu}m$) in a high vacuum furnace. Specimen's diameter and height were 4mm and 40 mm. Surface and sectional images of porous Ti implants were evaluated by scanning electron microscope(SEM). Porosity and average pore size were evaluated by mercury porosimeter. Young's modulus and tensile strength were evaluated by universal testing machine(UTM). Results: Porosity of Implant was increased according to larger particle size of the powder. Boundary portions of particles are sintered fully and others portions were formed pore. Young's modulus was decreased by formed porous structure. Tensile strength was decreased according to larger the particle size of the powder, but higher than human bone. Conclusion: If prepared by adjust the porosity of the porous Ti implant will be able to resolve the stress shielding phenomenon.

• 청정기술
• /
• 제29권4호
• /
• pp.249-254
• /
• 2023

본 연구에서는 제올라이트의 물리적 특성으로부터 기공율을 추정하는 연구를 수행하였다. 입자상 물질의 기공율 직접 측정의 어려움으로 본 연구에서는 여러 문헌에서 제시된 계산식에 제올라이트의 물리적 특성 측정값을 적용하여 기공율을 계산하였다. 이를 위해 제올라이트 3종-zeolite beta, zeolite Y, ZSM-5-에 대해 각각의 평균입자 크기 및 particle size distribution, 비표면적 및 기공특성을 측정하였으며, 가스와 액상을 이용한 진밀도, tap과 untapped를 적용한 겉보기 밀도를 측정하였다. 측정결과로부터 기공율을 계산하여 결과를 비교하고 기공율을 결정하는 주요 인자에 대해 평가하였다.

• 한국세라믹학회지
• /
• 제27권2호
• /
• pp.179-186
• /
• 1990

Silicon carbide porous materials used for hot gas filters were prepared using oxide binder. Chamotte, frit and H3PO4 were starting materials to synthesize the oxide binder for high temperature-use. Room temperature bending strength of the silicon carbide porous body was increased with increasing firing temprature or with the amount of the content of frit in the oxide binder. However, in the oxidebinder fired above132$0^{\circ}C$, cristobalite form of AlPO4 phase which undergoes rapid inversion became more prominent with increasing firing time. the average pore size of the silicon carbide filter materials was found to be about one third of the average grain size of the silicon carbide powder used in this study.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1992년도 추계 총회 및 학술발표회
• /
• pp.53-54
• /
• 1992

In this study characteristics of dynamic filters utilizing Taylor vortices were investigated both experimentally and theoretically. With fine silica slurry of 4.0 $\mu$m in average size experiments were conducted in Taylor vortices generated between the rotating inner cylinder consisting of microfiltration membrane of 1.2 $\mu$m in average pore size and the stationary outer cylinder. The diameter of the inner cylinder was 5.2 cm. Four outer cylinders having different diameters were manufactured and therefore four types of dynamic filters having the different ratio of the annular gap to the inner cylinder radius, i.e. 0.17, 0.33, 0.54, 0.65, were used as the experimental apparatus, as shown in Fig. 1.

• 한국염색가공학회지
• /
• 제14권6호
• /
• pp.305-312
• /
• 2002

In order to give a silk-like touch to PET fabrics, the PET fabrics were treated with NaOH alkaline solution in various conditions. In alkaline treatment, the liquor flow type pilot weight reduction apparatus with magnetostrictive ultrasonic transducer was used for the study. The effects of ultrasonic application, treatment time and temperature at NaOH 4% and 6"A solution on the decomposition rate of PET fabrics. From the results of the decomposition rate of PET fabrics, the qualitative and quantitative analysis of oligomer after decomposition of PET fabrics carried out by the HPLC. On the other hand, the surface pore characteristics of decomposition PET fabrics measured by porosimetery. The pore characteristics on the surface of treated PET fiber depended on the decomposition rate and did not depend on the ultrasonic cavitation. The pore diameter of alkaline untreated PET fiber were 15A and those of treated PET fibers were 5~6$\AA$ at the maximum pore volume. The average pore sizes of fiber before and after treatment were 141 h and 160h, respectively. Total amount of oligomer of the untreated PET fibers were 1.70wt% and 67.7% of total oligomer occupied with PET cyclic trimer and PET cyclic tetramer. Total amount of oligomer of fiber with 26.9% and 48.0% of weight loss without ultrasonic application were 1.78wt% and 1.79wt%, respectively. Also total amount oligomer of fibers which were reduced 27.7% and 48.2% of weight loss with ultrasonic application were 1.74wt%. This result showed that the removal rate of oligomer in the process of alkaline hydrolysis with ultrasonic higher than that of without ultrasonic application.tion.