Browse > Article
http://dx.doi.org/10.4191/KCERS.2003.40.1.005

Effect of the Sintering Temperature on Electrical Properties of Porous Barium-strontium Titanate Ceramics  

Kim, Jun-Gyu (Institute of Advanced Materials, Inha University)
Sim, Jae-Hwang (School of Materials Science and Engineering, Inha University)
Cho, Won-Seung (School of Materials Science and Engineering, Inha University)
Publication Information
Abstract
Porous barium-strontium titanate ceramics were fabricated by adding corn- or potato-starch (are referred to as starch). The effect of sintering temperature on the microstructure and electrical properties of the porous ceramics was investigated. The room-temperature electrical resistivity of the barium-strontium titanate ceramics decreased with sintering temperature. The porosity and pore size were decreased and the grain size was increased with increasing the sintering temperature. The porosity and grain size of the barium-strontium titanate ceramics with corn-starch sintered at 1300 and 1450$^{\circ}C$ were 28.5, 22.6% and 3.2, 6.2 $\mu\textrm{m}$, respectively. The average pore sizes of the barium-strontium titanate ceramics with corn-starch sintered at 1300, 1400 and 1450$^{\circ}C$ were 0.5, 0.3 and 0.2 $\mu\textrm{m}$, respectively. The decrease in the room-temperature resistivity with increasing sintering temperature is attributed mainly due to the increase of grain size and the decrease of the electrical barrier height of grain boundaries as well as the partial decrease of porosity.
Keywords
Porous barium-strontium titanate ceramics; PTCR; Electrical property; Sintering temperature; Starch;
Citations & Related Records
Times Cited By KSCI : 3  (Citation Analysis)
연도 인용수 순위
1 Composite PTCR Thermistors Utilizing Conducting Borides, Silicides and Carbide Powders /
[ T. R. Shrout;D. Moffatt;W. Huebner ] / J. Mater. Sci.   DOI
2 Capacitance-vs-voltage Characteristics of ZnO Varistors /
[ K. Mukae;K. Tsuda;I. Nagasawa ] / J. Appl. Phys.   DOI
3 Preparation of Nano-size <TEX>$BaTiO_3$</TEX> Powder Using Glycothermal Method /
[ B. K. Kim;D. Y. Lim;J. S. No;S. B. Cho ] / J. Kor. Ceram. Soc.   과학기술학회마을   DOI   ScienceOn
4 Resistivity Anomaly in Doped Barium Titanate /
[ W. Heywang ] / J. Am. Ceram. Soc.   DOI
5 PTC Thermistors /
[ J. G. Fagan;V. R. W. Amarakoon ] / Am. Ceram. Soc. Bull.
6 Effect of Humidity on the Electrical Response of Porous <TEX>$BaTiO_3$</TEX> Ceramics /
[ A. C. Caballero;M. Villegas;J. F. Fernandez;M. Viviani;M. T. Buscaglia;M. Leoni ] / J. Mater Sci. Lett.   DOI   ScienceOn
7 Positive Temperature Coefficient Resistivity in<TEX>$Ba_{1-x}Sr_xPb_{1+x}O_{3-\delta}$</TEX> Ceramics /
[ H. Nagamoto;H. Kagotani;T. Okubo ] / J. Am. Ceram. Soc.   DOI   ScienceOn
8 Semiconducting Barium Titanate /
[ W. Heywang ] / J. Mater. Sci.   DOI
9 Influence of Potassium on Preparation and Performance of PTC Resistors /
[ I. C. Ho;H. L. Hsieh ] / J. Am. Ceram. Soc.   DOI   ScienceOn
10 Effect of Sintering Aids on Microstructures and PTCR Characteristic of <TEX>$(Sr_{0.2}Ba_{0.8})TiO_3$</TEX> Ceramics /
[ H. F. Cheng;T. F. Lin;C. T. Hu ] / J. Am. Ceram. Soc.   DOI   ScienceOn
11 Characterization of the Firing Schedule for Positive Temperature Coefficient of Resistance BaTiO₃ /
[ B. C. Lacourse;V. R. W. Amarakoon ] / J. Am. Ceram. Soc.   DOI
12 Preparation of Porous <TEX>$BaTiO_3$</TEX> PTC Thermistors by Adding Graphite Porosifiers /
[ S.-M. Su;L.-Y. Zhang;H.-T. Sun;X. Yao ] / J. Am. Ceram. Soc.   DOI   ScienceOn
13 The PTC Effect of Barium Titanate /
[ J. Daniels;K. H. Hardtl;R. Wernike ] / Philips Tech. Rev.
14 Formation Rate of Tetragonal <TEX>$BaTiO_3$</TEX> Powder by Hydrothermal Synthesis and its Dielectric Property /
[ J.-H. Lee;Y.-K. Choi;C. W. Won;C. S. Kim ] / J. Kor. Ceram. Soc.   과학기술학회마을   DOI   ScienceOn
15 Effect of Microstructure on the PTCR Effect in Semiconducting Barium Titanate Ceramics /
[ M. Kuwabara ] / J. Am. Ceram. Soc.   DOI   ScienceOn
16 PTCR Characteristics in Porous <TEX>$(Ba,Sr)TiO_3$</TEX> Ceramics Produced by Adding Partially Oxidized Ti Powders /
[ J.-G. Kim;W.-S. Cho;K. Park ] / Mater. Sci. Eng. B   DOI   ScienceOn
17 Influence of Reoxidation on PTC Effect of Porous <TEX>$BaTiO_3$</TEX> /
[ T. Takahashi;Y. Nakano;N. Ichinose ] / J. Ceram. Soc. Jpn.   DOI
18 Determination of the Potential Barrier Height in Barium Titanate Ceramics /
[ M. Kuwabara ] / Sol. State Elect.   DOI   ScienceOn
19 Semiconducting Barium Titanate Ceramics Prepared by Boron-containing Liquid-phase Sintering /
[ I. C. Ho ] / J. Am. Ceram. Soc.   DOI   ScienceOn
20 Humidity Response Characteristics of Barium Titanate /
[ T. J. Hwang;G. M. Choi ] / J. Am. Ceram. Soc.   DOI   ScienceOn
21 Sintering and Dielectrics Properties of BaTiO₃-Ni Composite Ceramics /
[ H. Emoto;J. Hojo ] / J. Ceram. Soc. Jpn.   DOI
22 Factors and Mechanisms Affecting the Positive Temperature Coefficient of Resistivity of Barium /
[ J. B. Macchesney;J. F. Potter ] / J. Am. Ceram. Soc   DOI
23 Influence of Doping on Humidity Sensing Properties of Nanocrystalline <TEX>$BaTiO_3$</TEX> /
[ J. Wang;B. Xu;G. Liu;Y. Liu;F. Wu;X. Li;M. Zhao ] / J. Mater. Sci. Lett.   DOI   ScienceOn
24 Semiconducting Bodies in the Family of Barium Titanates /
[ O. Saburi ] / J. Am. Ceram. Soc.   DOI
25 Determination of Potential Barrier Heights at the Grain Boundaries of PTC Ceramics /
[ Y. G. Li;S. G. Cho ] / J. Kor. Ceram. Soc.   과학기술학회마을
26 Influence of Stoichiometry on the PTCR Effect in Porous Barium Titanate Ceramics /
[ M. Kuwabara ] / J. Am. Ceram. Soc.
27 Some Aspects of Semiconducting Barium Titanate /
[ G. H. Jonker ] / Solid State Electron.   DOI   ScienceOn