• Journal of Pharmaceutical Investigation
• /
• 제35권6호
• /
• pp.411-416
• /
• 2005

The aim of the present work was to prepare the nanosuspension of inorganic pigment which shows light reflection and scattering as efficient sunscreen. The zinc oxide (ZnO) was chosen as an inorganic pigment, and high pressure homogenizer and bead mill have been used for the preparation of nanosuspension. The ZnO nanosuspensions were characterized by particle size, in vitro sun protection factor (SPF) and UV transmittance. ZnO nanosuspension prepared by bead mill showed the average diameter of $119{\pm}4\;nm$, resulting in the high value of SPF $(28.74{\pm}2.06,\;n=20)$, while that prepared by high pressure homogenizer showed the average diameter of $751{\pm}32\;nm$ with the relative lower value of SPF $(21.38{\pm}1.94\;n=20)$. In addition, the film of ZnO nanosuspension prepared by bead mill was showed a high visible ray (VIS) transmittance, indicating a high transparency. In conclusion, a physically stable ZnO nanosuspension in cyclomethicone was successfully prepared using bead mill for the suitable sunscreen preparations.

• 한국음향학회지
• /
• 제41권1호
• /
• pp.9-15
• /
• 2022

기존의 나노입자 현탁액의 분산과정의 한계를 극복하여 단분산된 나노입자만으로 이루어진 현탁액을 얻기 위하여, 기존의 방법으로 전분산 처리된 현탁액을 다시 초음파 무화효과 및 사이클론을 이용하여 여과하는 방법을 제안하였다. 평균직경 250 nm인 Al₂O₃나노입자로 0.5 wt%인 현탁액을 만들어 초음파세척기 및 호모지나이저를 이용하여 각각 전처리 분산된 현탁액에 대하여 제안한 여과법을 적용하였다. 그 결과 초음파세척기로 전처리 분산한 경우 단분산된 나노입자 현탁액으로 여과하기 위해서는 종속 연결된 사이클론이 3개가 요구되는 반면, 호모저나이저로 전처리 분산된 현탁액의 경우는 2개의 사이클론으로도 가능함을 확인 하였다. 초음파 무화기 주파수의 조정과 사이클론의 설계 변경에 의해 다양한 종류의 나노입자에 대한 여과가 가능할 것으로 기대된다.

• International Journal of Oral Biology
• /
• 제44권3호
• /
• pp.108-114
• /
• 2019

In the present study, rutile phase titanium dioxide nanoparticles ($R-TiO_2$ NPs) were prepared by hydrolysis of titanium tetrachloride in an aqueous solution followed by calcination at $900^{\circ}C$. The composition of $R-TiO_2$ NPs was determined by the analysis of X-ray diffraction data, and the characteristic features of $R-TiO_2$ NPs such as the surface functional group, particle size, shape, surface topography, and morphological behavior were analyzed by Fourier-transform infrared spectroscopy, scanning electron microscopy and energy dispersive X-ray spectroscopy, transmission electron microscopy, dynamic light scattering, and zeta potential measurements. The average size of the prepared $R-TiO_2$ NPs was 76 nm, the surface area was $19m^2/g$, zeta potential was -20.8 mV, and average hydrodynamic diameter in dimethyl sulfoxide (DMSO)-$H_2O$ solution was 550 nm. The 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay and morphological observations revealed that $R-TiO_2$ NPs were cytocompatible with oral cancer cells, with no inhibition of cell growth and proliferation. This suggests the efficacy of $R-TiO_2$ NPs for the aesthetic white pigmentation of teeth.

• 한국입자에어로졸학회지
• /
• 제10권2호
• /
• pp.53-59
• /
• 2014

Palladium (Pd) nanoparticles attached graphene (GR) composite was synthesized for an enhanced glucose biosensor. Aerosol spray pyrolysis (ASP) was employed to synthesize the GR-Pd composite using a colloidal mixture of graphene oxide (GO) and palladium chloride ($PdCl_2$) precursor. The effects of the weight ratio of the Pd/GR on the particle properties including the morphology and crystal structure were investigated. The morphology of GR-Pd composites was generally the shape of a crumpled paper ball, and the average composite size was about $1{\mu}m$. Pd nanoparticles less than 20 nm in diameter were deposited on GR sheets and the Pd nanoparticles showed clear crystallinity. The characteristic of the glucose biosensor fabricated with the as-prepared GR-Pd composite was tested through cyclic voltammetry measurements. The biosensor exhibited a high current flow as well as clear redox peaks, which resulted in a superior ability of the catalyst in terms of an electrochemical reaction. The highest sensitivity obtained from the amperometric response of the glucose biosensor was $14.4{\mu}A/mM{\cdot}cm^2$.

• 청정기술
• /
• 제7권3호
• /
• pp.169-178
• /
• 2001

섬유염색은 전 세계적으로 매우 큰 시장이나, 염료를 사용하여 섬유염색을 수행하는 기존 인쇄 공정의 경우 염료의 손실 및 환경오염의 문제점을 갖고 있다. 기존 공정들의 경우 섬유 인쇄 시 전처리 및 후처리 공정이 필요하고 이들 공정에서 폐수가 발생하게 된다. 이런 문제점들의 해결방안으로 전처리 및 후처리 공정이 필요없고 잉크를 효율적으로 사용할 수 있는 잉크제트 프린팅 기법을 섬유염색 기술에 적용하려는 노력이 진행중이다. 섬유인쇄를 위해 잉크제트 프린터를 사용할 경우 안료를 사용하기 때문에 잉크는 액체 상에 고체입자가 분산되어 있는 서스펜션 상태로 존재한다. 분자역학 모사 기법과 유사한 Stokesian 역학 모사 방법을 사용한 전산모사를 통해 외부에서 가해진 압력구배에 의해 노즐 관에 흐르는 분산잉크 중의 입자 분포 및 속도 분포 변화를 살펴보았다. 전산모사결과 입자의 부피분율이 낮을수록, 평균 무차원 서스펜션 속도가 낮을수록, 노즐 관과 입자 크기 사이의 비(H/a)가 클수록 입자들의 분포가 상당히 균일한 것으로 나타났다. 따라서 잉크제트 프린팅 기법을 사용하여 섬유인쇄를 수행하는 경우, 노즐 관에의 유속을 작게 하고 노즐 관과 입자 사이의 크기 비를 크게 해야 균일한 인쇄 성능을 얻을 수 있을 것으로 판단된다.

• 한국입자에어로졸학회지
• /
• 제12권2호
• /
• pp.37-42
• /
• 2016

$CeO_2$ nanoparticles were prepared by a flame spray pyrolysis from aqueous solution of cerium nitrate. The morphology, structure crystallinity and specific surface area of as-prepared nanoparticles were characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD), and Brunauer-Emmett-Telle (BET). The $CeO_2$ nanoparticles about 5 nm in diameter showed a cubic fluorite structure and polyhedral morphology. The average particle size increased as the cerium nitrate concentration increased. UV absorption performance of the as-prepared nanoparticles was measured by UV-visible spectroscopy. UV absorption of $CeO_2$ nanoparticles was more effective than that of commercial $TiO_2$ nanoparticles. Effect of dopants such as Ti and Zn to $CeO_2$ nanoparticles on UV absorption properties was also investigated. In case of $Ti/CeO_2$, and $Zn/CeO_2$ nanoparticles, they showed a little higher UV absorption values compared with $CeO_2$ nanoparticles. The as-prepared nanoparticles can be promising materials with high UV absorption value.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.429-429
• /
• 2008

Li$[Ni_{1/2}Co_{1/2}]O_2$ powder were synthesized from co-precipitation spherical metal oxide, $[Ni_{1/2}Co_{1/2}](OH)_2$. The preparation of metal hydroxide was significantly dependent on synthetic conditions, such as pH, amount of chelating agent, stirring speed, etc. The optimized condition resulted in $[Ni_{1/2}Co_{1/2}](OH)_2$, of which the particle size distribution was uniform and the particle shape was spherical, as observed by scanning electron microscopy. Calcination of the uniform metal hydroxide with LiOH at higher temperature led to a well-ordered layer-structured Li$[Ni_{1/2}Co_{1/2}]O_2$, as confirmed by X-ray diffraction pattern. Also these materials have ${\alpha}-NaFeO_2$ ($R\bar{3}m$) structure. Due to the homogeneity of the metal hydroxide, $[Ni_{1/2}Co_{1/2}](OH)_2$, the final product, Li$[Ni_{1/2}Co_{1/2}]O_2$, was also significantly uniform, i.e., the average particle size was of about 10 to 15 ${\mu}m$ in diameter and the distribution was relatively narrow. As a result, the corresponding tap-density was also high approximately 2.41 $gcm^{-3}$, of which the value is comparable to that of commercialized $LiCoO_2$.

• 한국산업보건학회지
• /
• 제9권2호
• /
• pp.145-157
• /
• 1999

Wood dust is created when machines are used to cut or shape wood materials. Industries of high risk of wood dust exposure are sawmills, dimension mills, furniture industries, and carpenters, etc. Health effects associated with wood dust exposure includes dermatitis, allergic respiratory effects and cancer. Health effects of wood dus t are mainly depend on the concentration, dust size and exposure time. This study were carried out to evaluate the concentration and particle size distribution of wood dust during working processes. The subjects of this study were 53 workers exposed to wood dust in 7 furniture factories and 5 musical instruments, and 5 sawmill factories. The average total wood dust concentrations measured by personal cascade impactor were $1.82{\pm}2.31mg/m^3$ in primary manufacture, $3.59{\pm}1.72mg/m^3$ in s econdary manufacture, $5.09{\pm}1.46mg/m^3$ in sanding operation. Mass median diameters of hardwoods dust were $3.36{\mu}m$ in primary manufacture, $4.25{\mu}m$ in secondary manufacture, $4.21{\mu}m$ in sanding operation. softwoods dust were $3.39{\mu}m$ in primary manufacture, $4.34{\mu}m$ in secondary manufacture. Particle size distributions showed a nearly the same pattern in each working processes. The sample concentration of all hardwood dust exceeded the Threshold Limit Value(TLV) and 20.8% of the softwood dust exceeded the Threshold Limit Value. The range of size distribution were $0.5-10{\mu}m$ in the soft and hardwood dust. The respirable dust of soft and hardwood took up 59% and above. Therefore new threshold limit value for wood dust should be needed in Korea. Also, it should be done for various studies on health effects related to occupational exposure of wood dust.

• 한국재료학회지
• /
• 제12권5호
• /
• pp.407-413
• /
• 2002

Eutectic high chromium cast irons containing 17%Cr and 26%Cr were produced for this research by making each of them solidify unidirectionally. Abrasion wear test against SiC or $Al_2$O$_3$bonded paper was carried out using test pieces cut cross-sectionally at several distances from the chill face of castings. The wear resistance was evaluated in connection with the parameters such as eutectic colony size($E_w$), area fraction of boundary region of the colony($S_B$) where comparatively large massive chromium carbides are crystallized and, average diameter of chromium carbides in the boundary region($D_c$). The wear rate($R_w$), which is a gradient of straight line of wear loss versus testing time, was influenced by the type and the particle size of the abrasives. The $R_w$ value against SiC was found to be larger than that against A1$_2$O$_3$under the similar abrasive particle size. In the case of SiC, the $R_w$ value increased with an increase in the particle size. The $R_w$ value also increased as the eutectic colony size decreased, and that of the 17%Cr iron was larger than that of the 26%Cr iron at the same $E_w$ value. Both of the $S_B$ and $D_c$ values were closely related to the $R_w$ value regardless of chromium content of the specimens. The $R_w$ values of the annealed specimens were greater than those of the as-cast specimens because of softened matrix structures. As for the relationship between wear rate and macro-hardness of the specimens, the hardness resulting in the minimum wear rate was found to be at 550 HV30.

• 대한금속재료학회지
• /
• 제48권4호
• /
• pp.357-362
• /
• 2010

Ferromagnetic Mn-Al nanoparticles were prepared using a plasma arc discharge method. The influence of the process parameters on the vaporization rate, composition, particle size, and magnetic properties of the as-produced nanoparticles was investigated. The Mn content was found to be higher in the nanoparticles than in the corresponding mother materials, although the difference diminished with the reaction time. As the $H_2$ content in the reaction gas increased, both the vaporization rate and the particle size increased. With 30 at.% Mn, the average particle diameter was 35.2 nm under a pure Ar gas condition, whereas it was 95.4 nm at a Ar:$H_2$ ratio of 60:40. With the addition of a small amount of carbon, ${\varepsilon}$-phase nanoparticles were successfully synthesized. After a heat treatment in a vacuum for 30 min at $500^{\circ}C$, the nonmagnetic ${\varepsilon}$-phase was transformed into the ferromagnetic ${\tau}$-phase, and a very high coercivity of nearly 5.6 kOe was achieved.