• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.11
• /
• pp.83-93
• /
• 2014

It is a widespread concern that electrical interconnection based network-on-chip (NoC) will ultimately face the limitation in communication bandwidth, transmission latency and power consumption in the near future. With the development of silicon photonics technology, a hybrid optical network-on-chip (HONoC) which embraces both electrical- and optical interconnect, is emerging as a promising solution to overcome these problems. Today's leading edge systems-on-chips (SoCs) comprise heterogeneous many-cores for higher energy efficiency, therefore, extended study beyond regular topology based NoC is required. This paper proposes an energy and latency optimization topology design technique for HONoC taking into account the traffic characteristics of target applications. The proposed technique is implemented with genetic algorithm and simulation results show the reduction by 13.84% in power loss and 28.14% in average latency, respectively.

• Phonetics and Speech Sciences
• /
• v.2 no.2
• /
• pp.37-42
• /
• 2010

The purpose of this study is to first discriminate and assess those infants who appear healthy in appearance but who could face possible risk factors in the future and, secondly, to identify those infants who may have difficulties in their developmental stages. The subjects of this study consisted of 35 full-term infants (39-40 weeks) and 33 pre-term infants (34-35 weeks). The infants' voices were recorded for three minutes, for which EDIROL by Roland and a stand-type microphone made by SONY were used. This was done to discern the value of the Breath unit (B-unit) and the fundamental frequencies ($F_0$). It was found that there were significant differences in terms of F0 since the pre-term infants had higher F0 than the full-term infants, showing a result of 436.4 Hz for the full-term infants and 460 Hz for the pre-term infants (p<.05) There was an average rate of 4.01 for the full-term infants and 4.02 (SD=1.69) for the pre-term infants in shimmer. For NHR, it was observed .44 for the full-term infants and .50 for the pre-term infants, thus revealing no significant differences in these observations. This study shows that the crying of newborn babies is related to their physical conditions and it is a sensatory response to these conditions. Furthermore, this study could be helpful for the early detection and measurement of newborn babies who look clinically healthy but could be at risk through acoustic and physiological analyses.

• The Journal of the Acoustical Society of Korea
• /
• v.35 no.2
• /
• pp.134-142
• /
• 2016

In this paper, a method synthesizing speech signal using the 40 kHz ultrasonic signals reflected from the articulatory muscles was introduced and performance was evaluated. When the ultrasound signals are radiated to articulating face, the Doppler effects caused by movements of lips, jaw, and chin observed. The signals that have different frequencies from that of the transmitted signals are found in the received signals. These ADS (Acoustic-Doppler Signals) were used for estimating of the speech parameters in this study. Prior to synthesizing speech signal, a quantitative correlation analysis between ADS and speech signals was carried out on each frequency bin. According to the results, the feasibility of the ADS-based speech synthesis was validated. ADS-to-speech transformation was achieved by the joint Gaussian mixture model-based conversion rules. The experimental results from the 5 subjects showed that filter bank energy and LPC (Linear Predictive Coefficient) cepstrum coefficients are the optimal features for ADS, and speech, respectively. In the subjective evaluation where synthesized speech signals were obtained using the excitation sources extracted from original speech signals, it was confirmed that the ADS-to-speech conversion method yielded 72.2 % average recognition rates.

• Advances in nano research
• /
• v.3 no.2
• /
• pp.97-109
• /
• 2015

Citrate ion is a commonly used reductant in metal colloid synthesis, undergoes strong surface interaction with silver nanocrystallites. The slow crystal growth observed as a result of the interaction between the silver surface and the citrate ion makes this reduction process unique compared to other chemical and radiolytic synthetic methods. The antimicrobial effects of silver (Ag) ion or salts are well known, but the effects of citrate coated Ag nanoparticles (CAgNPs) are scant. Herein, we have isolated biofilm causative bacteria and fungi from drinking water PVC pipe lines. Stable CAgNPs were prepared and the formation of CAgNPs was confirmed by UV-visible spectroscopic analysis and recorded the localized surface plasmon resonance of CAgNPs at 430 nm. Fourier transform infrared spectroscopic analysis revealed C=O and O-H bending vibrations due to organic capping of silver responsible for the reduction and stabilization of the CAgNPs. X-ray diffraction micrograph indicated the face centered cubic structure of the formed CAgNPs, and morphological studies including size (average size 50 nm) were carried out using transmission electron microscopy. The hydrodynamic diameter (60.7 nm) and zeta potential (-27.6 mV) were measured using the dynamic light scattering technique. The antimicrobial activity of CAgNPs was evaluated (in vitro) against the isolated fungi, Gram-negative and Gram-positive bacteria using disc diffusion method and results revealed that CAgNPs with 170ppm concentration are having significant antimicrobial effects against an array of microbes tested.

• Korean Journal of Materials Research
• /
• v.12 no.5
• /
• pp.407-413
• /
• 2002

Eutectic high chromium cast irons containing 17%Cr and 26%Cr were produced for this research by making each of them solidify unidirectionally. Abrasion wear test against SiC or $Al_2$O$_3$bonded paper was carried out using test pieces cut cross-sectionally at several distances from the chill face of castings. The wear resistance was evaluated in connection with the parameters such as eutectic colony size($E_w$), area fraction of boundary region of the colony($S_B$) where comparatively large massive chromium carbides are crystallized and, average diameter of chromium carbides in the boundary region($D_c$). The wear rate($R_w$), which is a gradient of straight line of wear loss versus testing time, was influenced by the type and the particle size of the abrasives. The $R_w$ value against SiC was found to be larger than that against A1$_2$O$_3$under the similar abrasive particle size. In the case of SiC, the $R_w$ value increased with an increase in the particle size. The $R_w$ value also increased as the eutectic colony size decreased, and that of the 17%Cr iron was larger than that of the 26%Cr iron at the same $E_w$ value. Both of the $S_B$ and $D_c$ values were closely related to the $R_w$ value regardless of chromium content of the specimens. The $R_w$ values of the annealed specimens were greater than those of the as-cast specimens because of softened matrix structures. As for the relationship between wear rate and macro-hardness of the specimens, the hardness resulting in the minimum wear rate was found to be at 550 HV30.

• Korean Journal of Health Education and Promotion
• /
• v.20 no.4
• /
• pp.67-78
• /
• 2003

This investigation was performed to summarize a few prominent features of smoking prevention program studies and to evaluate the quality of smoking prevention program studies using the Quality of Study Rating Form (QSRF). 24 school-based smoking prevention programs were subjected to an evaluation of study quality using QSRF. Study quality was 57.29 points out of 100 points on average, so it cannot be said that study quality was good. Most of the studies described the subjects and the intervention contents and intervention time. 50% stated where the intervention occurred specifically, 50% of the studies either discussed a specific theory that justified the use of one or more intervention methods, or they cited literature said to support the chosen intervention method. Only one study assigned subjects randomly to experimental groups or control groups and 50.0% of the studies showed baseline equality. There was no study where subjects were blind to being in the treatment or control group or where subjects were selected randomly by random sampling procedure. 79.2% of the studies had non-treated control groups and 20.8% of the studies had comparison groups with other treatments in the form of either other delivery methods or other contents. Sample sizes were larger than 21 in the experimental group for all studies. 75% of the studies stated face validity of outcome measure or cited from previous literature. 58.3% of the studies tested reliability and 45.8% reported the reliability measure was a figure of .70 or greater. There was no study where those rating outcomes were rated blind, because researchers generally collected data by themselves. Outcome measures were taken only after the intervention was completed and tests of statistical significance were generally referred to statistical method and p value in all studies. All studies met the criteria that follow-up was greater than 75%. The implications for the future studies were discussed.

• Journal of the Korean Ceramic Society
• /
• v.40 no.9
• /
• pp.891-896
• /
• 2003

Novel fabrication technique was developed for high strength Reaction-Bonded SiC (RBSC) hot gas filter for use in IGCC (Integrated Gasification Combined Cycle) system. The room and high temperature fracture strengths for Si-melt infiltrated reaction-bonded SiC were 50-123, and 60-66 MPa, respectively. The average pore size was 60-70 $\mu\textrm{m}$ and the porosity was about 34 vol％. RBSC infiltrated with molten silicon showed improved fracture strength at high temperature, as compared to that of clay-bonded SiC, due to SiC/Si phase present within SiC phase. The thickness for SiC/Si phase was increased with increasing powder particle size of SiC from 10 to 34 $\mu\textrm{m}$. Pressure drop with dust particles showed similar response as compared to that for Schumacher type 20 filter. The filter fabricated in the present study showed good performance in that the filtered powder size was reduced drastically to below 1 $\mu\textrm{m}$ within 4 min.

• The Korean Journal of Pain
• /
• v.20 no.2
• /
• pp.174-180
• /
• 2007

Background: The diagnosis of trigeminal neuralgia (TN) is based on only clinical criteria. The purpose of this study was to estimate the clinical manifestations of TN patients treated at our pain clinic. Methods: A total of 341 patients with TN from Jan. 2004 to Dec. 2006 was evaluated the intensity, site, and onset of pain, facial sensation, duration of pain attack, pain free interval, triggering factors, and effects of the previous treatments with TN specific questionnaire and interview at the first visit of our pain clinic. Results: About 80% of the patients were over 50 years of age and 256 (75%) patients were women. Average durations from first attack of their pain and from current pain attack were 7 years and 16 weeks, respectively. The two most frequently involved trigeminal nerve branches were maxillary (40%) and mandibular (39%) branches. Three quarters of the total patients experienced only paroxysmal pain that lasted less than one minute. About 90% of patients had pain free period at least one time. Most common triggering factors were chewing (88%), brushing teeth (82%), washing face (79%), and talking (70%). Only 16 patients (5%) had no previous treatment and the others had more than one treatment, such as medication (68%) and interventional procedures (35%). The most common reasons for early discontinuation of carbamazepine were dizziness, ataxia, and vomiting. Conclusions: TN has specific clinical features of pain, which should be considered at diagnosis.

• Korean Institute of Interior Design Journal
• /
• v.19 no.1
• /
• pp.180-189
• /
• 2010

Since collective houses are started to be supplied, the housing market has been transformed from supplier to demander oriented, and various type with same area of unit households have been deigned and started to be distributed. It can be expected that such transfer phenomenon would be continuously sped-up, and unit household will be more subdivided and varied. Thus, we analysed and studied the planes with subject of unit households in national housing scale ($85m^2$) that is treated as supply standard and has biggest volume in construction by Korean housing corporation. The analysing method is investigating the area of each room within unit household, calculating their minimum, maximum, and average values, studying the efficiency of unit household plane according to the structure of each room by comparative analysis these values, and analysing changing matter by investigating any change of each room area. The analysing results of which are followings. At first, number of BAY on face is increasing. Second, allocation of each room has been vary. Third, area ratio among bedroom1, livingroom, diningroom/kitchen become similar. Fourth, the area of diningroom/kitchen become somewhat bigger. Fifth, the space for passage way is efficiently allocated. Sixth, service area is reduced, Seventh, stereotyped phenomenon Is appeared. Based on many studies so far, any improvements of unit householder in national housing scale are followings. First, in terms of forming style, unit householder in national housing scale is unfolded in various way though, the form of each room is not more than typical style. Second, it shows stereotyped phenomenon. Especially, bathroom 1, 2 show stereotyped feature in terms of their type and area across entire research years, also LDK allocation method is stereotyped, as well as stereotyped trend in bedroom 2, 3, allocation for 4 BAY type.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.2
• /
• pp.385-395
• /
• 1999

Video-On-demand system provides electronic video rental services from remote video servers on a broadband communication networks. When we assume some situation that serve the same video stream by batching, each time single video stream became available at server-end side, we face the problem that what video stream to be scheduled at what time instant. Hence, in order to manage the resource bandwidth which is different at each stream, the policy of channel allocation became important factor. In this work, we proposed three type of scheduling policies with queueing, as are cumulative Waiting Time(CWT), Mean Waiting Time(MWT) and Predictable Popular Factor(PPF). While CWT policy is good for popular video, MWT policy was good for non-popular video. Also, we know that PPT policy has some fairness for average wait time and reneging rate of user requests.