• Computers and Concrete
• /
• v.24 no.2
• /
• pp.151-158
• /
• 2019

The sustainable development principle of replacing natural resources with renewable material is an important research topic. In this study, waste LCD (liquid crystal display) glass powder was used to replace cement (0%, 10%, 20% and 30%) through a volumetric method using three water-binder ratios (0.47, 0.59, and 0.71) to make cement mortar. The compressive strength was tested at the ages of 7, 28, 56 and 91 days. The test results show that the compressive strength increases with age but decreases as the water-binder ratio increases. The compressive strength slightly decreases with an increase in the replacement of LCD glass powder at a curing age of 7 days. However, at a curing age of 91 days, the compressive strength is slightly greater than that for the control group (glass powder is 0%). When the water-binder ratios are 0.47, 0.59 and 0.71, the compressive strength of the various replacements increases by 1.38-1.61 times, 1.56-1.80 times and 1.45-2.20 times, respectively, during the aging process from day 7 to day 91. Furthermore, a prediction model of the compressive strength of a cement mortar with waste LCD glass powder was deduced in this study. According to the comparison between the prediction analysis values and test results, the MAPE (mean absolute percentage error) values of the compressive strength are between 2.79% and 5.29%, and less than 10%. Thus, the analytical model established in this study has a good forecasting accuracy. Therefore, the proposed model can be used as a reliable tool for assessing the design strength of cement mortar from early age test results.

• Korean Journal of Construction Engineering and Management
• /
• v.20 no.3
• /
• pp.105-112
• /
• 2019

Due to abnormal high temperature, electric power demand has exceeded the backup power reserved for emergency case, hence, resulting in a major power outage. In today's overcrowded cities, the unexpected disruption in energy supply and demand is a major threat to the enormous economic damage and urban malfunctions. Existing methods for estimating the demand of the emergency power source do not lend themselves to predict the actual demand in the spatial dimension of the city. In addition, the reserve power is arbitrarily distributed in the case of emergency. This paper presents a method that predicts the emergency power demand using the spatial distribution of emergency power demand by applying the daily energy consumption intensity and emergency power demand according to urban spatial information and building use.

• Convergence Security Journal
• /
• v.21 no.2
• /
• pp.3-10
• /
• 2021

Nowadays, data-based scientific research is a trend, and the transmission of large amounts of data has a great influence on research productivity. To solve this problem, a separate network structure for transmitting large-scale scientific big data is required. ScienceDMZ is a network structure designed to transmit such scientific big data. In such a network configuration, it is essential to establish an access control list(ACL) for users and resources. In this paper, we describe the R&E Together project and the network structure implemented in the actual ScienceDMZ network structure, and define users and services to which access control policies are applied for safe data transmission and service provision. In addition, it presents a method for the network administrator to apply the access control policy to all network resources and users collectively, and through this, it was possible to achieve automation of the application of the access control policy.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.31 no.4
• /
• pp.587-604
• /
• 2021

Because the library cannot be run independently and used by many applications, it is important to detect vulnerabilities in the library. Fuzzing, which is a dynamic analysis, is used to discover vulnerabilities for the library. Although this fuzzing technique shows excellent results in terms of code coverage and unique crash counts, it is difficult to apply its effects to library fuzzing. In particular, a fuzzing executable and a seed corpus are needed that execute the library code by calling a specific function sequence and passing the input of the fuzzer to reproduce the various states of the library. Generating the fuzzing environment such as fuzzing executable and a seed corpus is challenging because it requires both understanding about the library and fuzzing knowledge. We propose a novel method to improve the ease of library fuzzing and enhance code coverage and crash detection performance by using a test framework. The systems's performance in this paper was applied to nine open-source libraries and was verified through comparison with previous studies.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.10
• /
• pp.1330-1336
• /
• 2021

Media sharing platform such as YouTube have grown significantly in the mobile environment. This is a platform that allows users to select and view broadcast programs that are only available on TV through network-connected PCs and mobiles, and share their media content to communicate. Currently, in the era where mobile and TV broadcasts can be viewed equally, there is a time difference between the video and real-time screen transmitted to TV and mobile, different from the actual situation.We want this time difference to be realized in the same way as the real time, and there is a need for a system that can broadcast in a free environment at any time. Therefore, in this paper, a broadcasting system was designed and implemented in a mobile environment. The result of reducing the delay time difference due to the improvement of the processing method was obtained.

• KIPS Transactions on Software and Data Engineering
• /
• v.10 no.2
• /
• pp.73-78
• /
• 2021

Recently, as interest in deep learning has increased, many researches in various fields using deep learning techniques have been conducted. Studies on automatic generation of fonts using deep learning-based generation models are limited to several languages such as Roman or Chinese characters. Generating Korean font is a very time-consuming and expensive task, and can be easily created using deep learning. For research on generating Korean fonts, it is important to prepare a Korean font dataset from the viewpoint of process automation in order to keep pace with deep learning-based generation models. In this paper, we propose a Korean font dataset for deep learning-based Korean font research and describe a method of constructing the dataset. Based on the Korean font data set proposed in this paper, we show the usefulness of the proposed dataset configuration through the process of applying it to a deep learning Korean font generation application.

• Journal of the Regional Association of Architectural Institute of Korea
• /
• v.21 no.4
• /
• pp.15-26
• /
• 2019

In recent years, researchers are increasingly trying to use BIM-based 3D models for BIM nD design such as 4D (3D + Time) and 5D (4D + Cost). However, there are still many problems in efficiently using process management based on the BIM information created at each design stage. Therefore, this study proposes a method to automate 4D and 5D design support in each design stage by using BIM-based Dynamo algorithm. To do this, I implemented an algorithm that can automatically input the process information needed for 4D and 5D by using Revit's Add-in program, Dynamo. In order to support the 4D design, the algorithm was created to enable automatic process simulation by synchronizing process simulation information (Excel file) through the Navisworks program, BIM software. The algorithm was created to automatically enable process simulation. And to support the 5D design, the algorithm was developed to enable automatic extraction of the information needed for mass production from the BIM model by utilizing the dynamo algorithm. Therefore, in order to verify the 4D and 5D design support algorithms, we verified the applicability through consultation with related workers and experts. As a result, it has been demonstrated that it is possible to manage information about process information and to quickly extract information from design and design changes. In addition, BIM data can be used to manage and input the necessary process information in 4D and 5D, which is advantageous for shortening construction time and cost. This study will make it easy to improve design quality and manage design information, and will be the foundation for future building automation research.

• Journal of KIBIM
• /
• v.9 no.4
• /
• pp.51-61
• /
• 2019

In the general manufacturing sector, prototyping used to reduce the risks that can arise with new conceptual products. However, in AEC area, it does not mass-produce a building, so the prototype itself becomes a building. Therefore, it is challenging to have prototyping of the same scale as the real thing, and the prototyping process in architecture is very inefficient. The prototyping process in the design stage typically assumes making a scaled model, partial model, or digital model. However, it is difficult for these models to correspond to the actual building and the environment of time and space such as scale, material, environment, load, physical properties and deformation, corrosion, etc., unlike the actual building. When using the digital twin concept in the prototyping process, it is possible to measure performance from the design stage to the operation stage. The digital twin was found by a method for monitoring based on physical twins and real-time linkage in the operation stage. Therefore, if the digital twin concept is applied at the design stage, it is possible to predict performance using not only current performance but also history information using real-time information. In order to apply the digital twin concept to the prototyping design process, we analyze the theoretical considerations and the prototyping design process of the digital twin, analyze the cases and research results where the prototyping design was applied, Provide an applied prototyping design process. The proposed process is tested through a pilot project and analyzed for potential use.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.11
• /
• pp.1384-1390
• /
• 2019

This paper proposes a technological solution for improving the recognition direction of target objects for automatic vision inspection by machine vision. This paper proposes a technological solution for improving the recognition direction of target objects for automatic vision inspection by machine vision. This enables the automatic machine vision inspection to detect the image of the inspection object regardless of the position and orientation of the object, eliminating the need for a separate inspection jig and improving the automation level of the inspection process. This study develops the technology and method that can be applied to the wire harness manufacturing process as the inspection object and present the result of real system. The results of the system implementation was evaluated by the accredited institution. This includes successful measurement in the accuracy, detection recognition, reproducibility and positioning success rate, and achievement the goal in ten kinds of color discrimination ability, inspection time within one second and four automatic mode setting, etc.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.4
• /
• pp.95-105
• /
• 2021

Road surface damage detection is essential for a comfortable driving environment and the prevention of safety accidents. Road management institutes are using automated technology-based inspection equipment and systems. As one of these automation technologies, a sensor to detect road surface damage plays an important role. For this purpose, several studies on sensors using deep learning have been conducted in recent years. Road images and label images are needed to develop such deep learning algorithms. On the other hand, considerable time and labor will be needed to secure label images. In this paper, the adversarial learning method, one of the semi-supervised learning techniques, was proposed to solve this problem. For its implementation, a lightweight deep neural network model was trained using 5,327 road images and 1,327 label images. After experimenting with 400 road images, a model with a mean intersection over a union of 80.54% and an F1 score of 77.85% was developed. Through this, a technology that can improve recognition performance by adding only road images was developed to learning without label images and is expected to be used as a technology for road surface management in the future.