• Korean Journal of Construction Engineering and Management
• /
• v.7 no.6
• /
• pp.79-89
• /
• 2006

Current removing process is labor intensive and time consuming, employing a conventional grinding type manual machine. From a social and economic point of views, these kinds of manual tasks bring about social inconvenience and economic loss including traffic jam and high labor costs. The objective of the study was to develop and evaluate a road stripe removal equipment using water jet technology. The following shows the results. First, It was analyzed that the obtainable productivity from the equipment developed in the study is 280% compared to the current equipment. In this study, it was also calculated the Benefit/Cost Ratio and the result showed that the ratio is 3.28, so it is expected that the equipment can produce great benefits for the relevant companies. Second, an analysis was also conducted on the traffic congestion cost, and the equipment could save about \2,550 million per day compared to the conventional equipment. Therefore, it is analyzed that the economic viability of the equipment is sufficient.

• Journal of Biosystems Engineering
• /
• v.31 no.2 s.115
• /
• pp.88-94
• /
• 2006

The market of rice transplanter has already been changed for riding and to be turned large size of chassis. Because an automation is rapidly expanded, It is strongly need to analyze a mechanism and develop a hydraulic circuit. In this study, we analyzed the mechanism of working equipment of rice transplanter for riding and developed hydraulic circuits. We proposed the operating mechanism of rice transplanter for riding through the mechanistic analysis of working equipment. And the simulation and experiment were performed. In order to up and down the working equipment of rice transplanter for riding, we designed the mechanism which was installed hydraulic circuit and hydraulic cylinder, and it was manufactured. The pressure of developed hydraulic circuit was set by 800 $N/cm^2$. In the field testing, the hydraulic response presented at 50 msec in the maximum driving velocity, 0.8 m/sec of rice transplanter for riding, and it was well performed. The results of experiments showed the system characteristics sufficient to use as the hydraulic mechanism for a rice transplanter for riding.

• Proceedings of the KIEE Conference
• /
• 2002.07a
• /
• pp.28-30
• /
• 2002

The increasing application of electronic equipment has heightened the interest in power quality in recent years because there are economic impacts on utilities, customers, and suppliers of load equipment. The power quality would impose result in severe damage on many industrial customers. As having been supplied many kinds of electronic devices such as computer and communication equipment, automation equipment and various kinds of control devices etc., it comes to be more and more difficult to maintain the clean power quality. According to the restructuring in electricity industry the power quality may be treated as goods as contract terms and regulation elements between power supplier and consumer in the near future. Under the above environment, the power quality should be monitored for all day long with appropriate devices which is possible to measure and record the associated power quality data to prove each responsibility for the impacts when disputes arise due to power quality problems power quality problems are occurred. In this paper the authors propose some functions to be considered and system configuration to monitor the associated power quality elements in developing the web based power quality monitoring system.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.1
• /
• pp.112-117
• /
• 2017

The arc, generated by Tungsten Inert Gas(TIG) welding, is stable and provides excellent quality of the weld. Since automation is difficult, a lot of work is performed by hand. In addition, to obtain the uniform weld quality is difficult when using a base metal having a nonuniform welding line, or when welding inside a pipe. Generally, TIG welding power has the characteristic of constant-current. The welding voltage is changed in proportion to the arc length. Hence, the automatic voltage control equipment should be applied at the TIG welding system. The automatic voltage control equipment has been designed using LabVIEW software. It consists of a manufactured voltage divider circuit, and jig for moving the torch. The voltage measurements and driving of the motor were performed through the algorithm implementation in LabVIEW. Welding was conducted while increasing the arc length. In this process, it was confirmed that the automatic voltage control equipment kept the arc length constant.

• Journal of Construction Engineering and Project Management
• /
• v.2 no.4
• /
• pp.11-19
• /
• 2012

Construction supply chain management (CSCM) has become one of the critical factors that determine the success of a construction project as it becomes increasingly complicated and mega-sized. Particularly for high-rise or mega-sized building construction, just-in-time supply chain management is required due to lack of storage space and effective logistics for construction components and materials at a construction site. Despite the fact that research and development of radio frequency identification (RFID) and wireless sensor network (WSN) technology have been performed, construction project managers still need to carry mobile devices and check material and component flow at each stage of the supply chain process. This research proposes that the equipment used in the construction supply chain process, such as movers, trailers, gates, and hoists, can become main actors in the supply chain process using RFID and WSN technologies. And the proposed equipment and process focused on a solution to the redundancy identification problem, which has been observed in operations that use RFID/WSN-based processes for construction logistics. This paper also presents issues identified through verification and validation of the research results and proposes further studies.

• Mass Spectrometry Letters
• /
• v.13 no.4
• /
• pp.106-114
• /
• 2022

A rapid and reliable approach to the identification of microorganisms is a critical requirement for large-scale culturomics analysis. MALDI-TOF MS is a suitable technique that can be a better alternative to conventional biochemical and gene sequencing methods as it is economical both in terms of cost and labor. In this review, the applications of MALDI-TOF MS for the comprehensive identification of microorganisms and bacterial strain typing for culturomics-based approaches for various environmental studies including bioremediation, plant sciences, agriculture and food microbiology have been widely explored. However, the restriction of this technique is attributed to insufficient coverage of the mass spectral database. To improve the applications of this technique for the identification of novel isolates, the spectral database should be updated with the peptide mass fingerprint (PMF) of type strains with not only microbes with clinical relevance but also from various environmental sources. Further, the development of enhanced sample processing methods and new algorithms for automation and de-replication of isolates will increase its application in microbial ecology studies.

• Journal of Drive and Control
• /
• v.20 no.1
• /
• pp.8-15
• /
• 2023

With the recent trend of intelligence and automation of construction work, a double-blade road cutter is being developed that automatically enables cutting along the cutting line marked on the road using a vision system. The road cutter can recognize the cutting line through the camera and correct the driving route in real-time, and it detects the load of the cutting blade in real-time to control the driving speed in case of overload to protect workers and cutting blades. In this study, a vision system mounted on a double-blade road cutter was developed. A cutting route recognition technology was developed to stably recognize cutting lines displayed on non-uniform road surfaces, and performance was verified in similar environments. In addition, a vision sensor protection module was developed to prevent foreign substances (dust, water, etc.) generated during cutting from being attached to the camera.

• The Journal of Korea Robotics Society
• /
• v.19 no.1
• /
• pp.79-91
• /
• 2024

Large warehouses are building automation systems to increase efficiency. However, small warehouses, military bases, and local stores are unable to introduce automated logistics systems due to lack of space and budget, and are handling tasks manually, failing to improve efficiency. To solve this problem, this study designed small loading and unloading equipment that can be mounted on transportation vehicles. The equipment can be controlled remotely and is automatically controlled from the point where pallets loaded with cargo are visible using real-time video from an attached camera. Cargo recognition and control command generation for automatic control are achieved through a newly designed deep learning model. This model is designed to be optimized for loading and unloading equipment and mission environments based on the YOLOv3 structure. The trained model recognized 10 types of palettes with different shapes and colors with an average accuracy of 100% and estimated the state with an accuracy of 99.47%. In addition, control commands were created to insert forks into pallets without failure in 14 scenarios assuming actual loading and unloading situations.

• Proceedings of the Korea Association of Information Systems Conference
• /
• 2004.05a
• /
• pp.122-137
• /
• 2004

Automation of a container terminal is a world-wide tendency nowadays. The interest of ACT (Automated Container Terminal) is increasing more and more because of necessity of container terminal with higher competitive power and ultramodern equipment to down the cost and up the efficiency. ECT (Europe Combined Terminals) and CTA (Container Terminal Altenwerder) have studied a detailed technique for the operation of ACT. In Korea, many projects related to the development of ACT are working at present. However, indiscreet introduction of ACT may cause tremendous loss. Thus it is much important thing that we search relevant automation level or type for an environment In this study, we propose the necessary strategy in developing ACT through analyzing the present condition, automated equipments and property of operation at advanced An. If the strategy is applied in development of domestic ACT, we'll be able to build ACT with higher competitive power.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.10a
• /
• pp.12-17
• /
• 2003

The basic concept of an improved business and productivity for Small and Medium Sized Enterprizes, which makes use of an information portal, is to assure competitive power, increase the production quantity through the interchange of a company and the outside environment, and to build cooperation. To reduce the charge of the equipment, as well as to introduce and information program, it should build an information environment from inside the company by suing the information portal ASP(Application Service Provider). This portal is already built by the basic information infrastructure through the Internet.