• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2002년도 춘계학술대회 및 임시총회
• /
• pp.81-86
• /
• 2002

In current CBR(Case-Based Reasoning) systems, the case adaptation is usually performed by rule-based method that use rules hand-coded by the system developer. So, CBR system designer faces knowledge acquisition bottleneck similar to those found in traditional expert system design. In this thesis, 1 present a model for learning method of case adaptation knowledge using case base. The feature difference of each pair of cases are noted and become the antecedent part of an adaptation rule, the differences between the solutions in the compared cases become the consequent part of the rule. However, the number of rules that can possibly be discovered using a learning algorithm is enormous. The first method for finding cases to compare uses a syntactic measure of the distance between cases. The threshold fur identification of candidates for comparison is fixed th the maximum number of differences between the target and retrived case from all retrievals. The second method is to use similarity metric since the threshold method may not be an accurate measure. I suggest the elimination method of duplicate rules. In the elimination process, a confidence value is assigned to each rule based on its frequency. The learned adaptation rules is applied in riven target Problem. The basic. process involves search for all rules that handle at least one difference followed by a combination process in which complete solutions are built.

• 수산경영론집
• /
• 제38권2호
• /
• pp.25-40
• /
• 2007

Recently, fisheries safety has been a matter of primary concern among consumers and suppliers. This phenomenon made them require the introduction of fisheries traceability systems. For traceability systems to be effective, automatic identification means play an important role. Therefore, RFID-based fisheries traceability systems are more required than barcode-based fisheries traceability systems. Unlikely EU and Japan, Korea did not accept mandatory traceability regulations. But Many countries began to accept mandatory traceability regulations to diminish food risks. So Korea is expected to adopt them in the near future. The purpose of this study is to find what benefits are generated from the adoption of RFID-based fisheries traceability systems and are related to their success. To do these, this study investigated primary benefits of RFID-based fisheries traceability systems from the perspectives of consumers and suppliers. Consumers' benefits were derived from the perceived risk dimensions. And suppliers' benefits were derived from operational benefits of RFID systems. To purify the benefits from RFID-based fisheries traceability systems, reliability and factor analysis were used. And the refined benefits of RFID-based fisheries traceability systems were additionally analyzed to find which benefits were significantly related to fisheries traceability systems' success. According to the analysis results, all risk dimensions except social risk were significantly related to their success. But in the benefits of suppliers, only "recalls and counterfeits" factor was significantly related to their success. These results implied that fisheries traceability systems should be based RFID technology instead of barcode and fisheries traceability systems were related to almost food risk dimensions. It's because these significant factors are related all food risks except social risk and the benefits of suppliers can be derived from only RFID technology.

• 한국자동차공학회논문집
• /
• 제20권3호
• /
• pp.119-125
• /
• 2012

Caliper intergrated Electric Parking Brake (EPB) is an automatic parking brake system, attached to rear caliper. Because EPB uses luxury vehicles recently, the drivers of vehicles are sensitive to the EPB noise. EPB is operated by the motor and gear, so noise is generated by motor and gear. In order to reduce noise, One of EPB manufacturers uses helical gear and changes the shape of EPB housing. But these methods are not optimized for reduction of interior noise. There are many noise transfer paths into vehicle interior and it is difficult to identify the noise sources. Therefore, in this study, we performed contribution analysis and modal testing in the vehicle system. It is possible to distinguish between air-borne noise and structure-borne noise in the vehicle interior noise by comparing interior noise peak with resonance mode map.

• 정보처리학회논문지B
• /
• 제19B권3호
• /
• pp.201-208
• /
• 2012

혈관 내 초음파 영상(IVUS: Intravascular ultrasoundimages)에서 내강(Lumen) 경계 영역을 검출하는 것은 환자의 심혈관 상태를 파악하는데 중요한 정보를 제공하며, 이를 통해 심혈관계 질환을 예측하고 진단할 수 있다. 따라서 정확하게 내강 경계를 분할하는 것은 매우 중요한 단계이다. 본 논문에서는 비모수적 확률 밀도 함수와 스무딩 함수를 사용하여 자동으로 내강 영역을 분할하는 기법을 제안한다. 각각의 혈관내 초음파 영상들을 극좌표 이미지로 변환 후 웨이블릿 변환을 적용하여 초기 관심 점들을 검출한다. 초기 관심점들 중에서 잡음과 칼슘에 의해 발생된 튀는 점들을 제거하기 위해 비모수적 밀도 함수와 스무딩 함수를 이용하여 튀는 점들을 제거하고 경계면에 해당하는 중요 관심 점만을 남긴다. 마지막으로, 다항곡선 접합(Polynomial curve fitting) 함수를 정의하고 다항식과 실제 내강 경계선에 접합된 관심 점을 이용하여 자연스러운 내강 경계면을 추정한다. 본 논문에서 제안한 방법을 다양한 초음파 영상에 대해 실험한 결과, 기존에 제안된 방법 보다 정확하게 경계면을 검출함을 알 수 있었다.

• 대한의용생체공학회:의공학회지
• /
• 제24권1호
• /
• pp.9-13
• /
• 2003

경막외마취는 전신마취가 불필요하므로 널리 활용되는 마취술이다. 그러나 경막외마취 시술시 천자침이 경막외강 내에 정확하게 위치하지 않으면 각종 부작용이 발생하므로 시술자의 세심한 주의뿐만 아니라 상당한 수준의 숙달이 필요하다. 본 연구에서는 천자침이 연결된 도관 내의 압력 변화를 범용 압력센서로 연속 계측함으로써 침이 경막외강 내로 진입하는 순간을 자동탐지하는 자동화된 저항소실법을 개발하였다. 17G Tuohy 침을 황인대까지 전진시킨 후 침에 공기도관을 연결하고 공기도관에 연결된 압력센서로 압력신호를 추출하여 적절히 증폭ㆍ필터링한 후 역치감지회로가 경막외강의 진입순간을 감지하도록 전자회로를 설계ㆍ제작함으로써 저항소실법을 자동화할 수 있었다. 소량의 공기 주입으로 도관 내의 압력을 50∼100mmHg까지 녹인 후 짐을 천천히 전진시키며 압력변화신호를 10개의 녹색 발광다이오드로 연속 표시하였고 압력이 20mmHg 이하로 하강하는 순간을 경막외강 진입시점으로 인식하여 시술자를 위해 경보를 울리는 보조기기의 형태로 구현하였다. 자체 시뮤레이션을 거친 후, 경막 외마취 시술이 예정된 환자 ,30명을 대상으로 자동화된 보조기기를 사용하여 시술하였고 수동적인 저항소실법을 병행하는 임상실험을 통하여 경막외 마취시술의 성공여부를 판정하였다. 본 기기의 도움으로 첫 번째 시도에서의 마취성공률은 83%이었고 두 번째 시도에서는 모두(100%) 성공하였으며 시술 중 주입된 공기의 용적은 1ml이내로써 별는 부작용이나 합병증은 없었으므로 본 연구의 유용성이 입증되었다. 본 연구의 자동화된 저항소실법은 공기도관을 사용하였으므로 감염의 가능성도 최소화된다고 볼 수 있었으며, 따라서 편리하고 안전한 경막외마취 시술이 가능할 것으로 판단된다.

• 수산해양기술연구
• /
• 제45권3호
• /
• pp.165-176
• /
• 2009

The process of berthing/deberthing operations for entering/leaving vessels in Busan northern harbor was analyzed and evaluated by using an integrated VTS(vessel traffic service) system installed in the ship training center of Pukyong National University, Busan, Korea. The integrated VTS system used in this study was consisted of ARPA radar, ECDIS(electronic chart display and information system), backup(recording) system, CCTV(closed-circuit television) camera system, gyro-compass, differential GPS receiver, anemometer, AIS(automatic identification system), VHF(very high frequency) communication system, etc. The network of these systems was designed to communicate with each other automatically and to exchange the critical information about the course, speed, position and intended routes of other traffic vessels in the navigational channel and Busan northern harbor. To evaluate quantitatively the overall dynamic situation such as maneuvering motions for target vessel and its tugboats while in transit to and from the berth structure inside a harbor, all traffic information in Busan northern harbor was automatically acquired, displayed, evaluated and recorded. The results obtained in this study suggest that the real-time tracking information of traffic vessels acquired by using an integrated VTS system can be used as a useful reference data in evaluating and analyzing exactly the dynamic situation such as the collision between ship and berth structure, in the process of berthing/deberthing operations for entering/leaving vessels in the confined waters and harbor.

• 한국가스학회지
• /
• 제22권2호
• /
• pp.1-20
• /
• 2018

Despite many measures, still from time to time catastrophic events occur, even after reviewing potential scenarios with HAZID tools. Therefore, it is evident that in order to prevent such events, answering the question: "What can go wrong?" requires more enhanced HAZID tools. Recently, new system based approaches have been proposed, such as STPA (system-theoretic process analysis) and Blended Hazid, but for the time being for several reasons their availability for general use is very limited. However, by making use of available advanced software and technology, traditional HAZID tools can still be improved in degree of completeness of identifying possible hazards and in work time efficiency. The new HAZID methodology proposed here, the Data-based semi-Automatic HAZard IDentification (DAHAZID), seeks to identify possible scenarios with a semi-automated system approach. Based on the two traditional HAZID tools, Hazard Operability (HAZOP) Study and Failure Modes, Effects, and Criticality Analysis (FMECA), the new method will minimize the limitations of each method. This will occur by means of a thorough systematic preparation before the tools are applied. Rather than depending on reading drawings to obtain connectivity information of process system equipment elements, this research is generating and presenting in prepopulated work sheets linked components together with all required information and space to note HAZID results. Next, this method can be integrated with proper guidelines regarding process safer design and hazard analysis. To examine its usefulness, the method will be applied to a case study.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2006년도 추계학술발표회
• /
• pp.217-219
• /
• 2006

This study focused an water quality response to land-based pollution loads and the appropriate pollutant load reduction in Chinhae Bay using an eco-hydrodynamic model. Land-based discharge foam urban areas, industrial complex and sewage treatment plant was the greatest contributor to cause red-tide blooms and summer hypoxia. Tidal currents velocity af the ebb tide was about 10 cm/s stronger than that of the flood tide. A residual current was simulated to. have a slightly complicated pattern with ranging from 0.1 to. 2.7 cm/s. In Masan Bay, pollutant materials cannot flaw from the inner to the outer bay easily because af residual currents flaw southward at surface and northward at the bottom. The simulation results of COD distribution showedhigh concentrations aver 3 mg/L in the inner part of Masan Bay related pollutant discharge, and charge, and lower levels less than 1.5mg/L in the central part of Chinhae Bay. For improvement water quality in Chinhae Bay, it is necessary to reduce the organic and inorganic loads from paint sources by mare than 50% and ameliorate severe polluted sediment.

• 한국항행학회논문지
• /
• 제20권3호
• /
• pp.167-174
• /
• 2016

활주로 및 유도로는 항공기가 이착륙하기 위한 기본 시설로서, 활주로 처리 용량은 공항의 수용 능력을 결정하는 주요 지표 중 하나이다. 항공기의 활주로 점유 시간은 이러한 활주로 처리 용량에 영향을 미치는 요소이다. 활주로 점유시간 확인을 위해서는 공항의 지상 감시 항적자료를 분석하여 항공기가 사용한 유도로를 확인하고 각 지점의통과 시간을 측정하는 것이 일반적인 방법이다. 본 연구는 항공기에서 송신하는 ADS-B 메시지를 이용한 착륙 항공기의 활주로 점유 시간에 대한 연구로 착륙 항공기의 활주로 점유 시간에 대한 분석과 고속 탈출 유도로를 포함한 활주로 사용 이력에 대한 분석을 수행 하였다. 분석 결과 공항의 구조로 인하여 동일한 활주로를 사용할 때에도 착륙 방향과 항공기 등급에 따라 활주로 점유시간이 차이가 나는 것을 확인하였다. 또한 분석된 활주로 점유시간은 항공교통시뮬레이션을 위한 기본 자료로 사용될 수 있을 것이다.

• 정보보호학회논문지
• /
• 제23권3호
• /
• pp.515-530
• /
• 2013

해양사고 조사의 결과는 원인규명은 물론 가해자 및 피해자의 과실여부와 과실정도를 판단하는 중요한 결정기준이 되고 있다. 그러나 해양사고는 해양이라는 특수한 환경에서 발생하기 때문에 사고현장의 보존, 사고 재연 및 목격자 확보 곤란 등 원인규명의 어려움이 있다. 이러한 해양사고의 특징으로 국제해사기구에서는 최근 발달된 전파통신 및 항해기술을 해상인명안전 협약에 도입하여 일정 규모 이상의 선박에 항해자료기록장치와 선박자동식별장치의 설치를 의무화하였고, 국제적으로 통일된 사고조사와 공조를 위해 발효한 새로운 해양사고 조사코드에서는 각 체약국에게 항해자료기록장치의 분석역량을 갖추도록 권고하고 있다. 이에 따라 본 논문에서는 선박용 블랙박스인 항해자료기록장치의 데이터 유형을 분석하고 디지털 포렌식 절차와 기법을 활용하여 사고원인을 효율적으로 조사할 수 있는 방법을 제시한다.