• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1326-1329
• /
• 1997

In designing the controller by changing the weighting matrix for the pirpose of satisfying constraints, the physical meaning of weighting matrix may disapperar and the system may not yield best performance because operation condition such as periodic disturbance was not considered. In this paper, the weighting matrix is fixed and controller is designed to minimize the new performance index to reduce the effects of periodic-type disturbances. This method is applied to design the satellite controller to verify the effetiveness.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.329-332
• /
• 1997

This paper deals with the attitude control problem of nonlinear MIMO propeller setup. Multivariable GPC[Generalized Predictive Control] is adopted as the main controller, and it is implemented by TMS320C31 in the current paper. The main object of control is to move the propellers to wanted positions. System identification is performed to configure the system. Performance of the multivariable predictive controller implemented is shown via some experiments, which shows the controller meets the adequate control purpose.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1996년도 춘계학술대회논문집; 부산수산대학교, 10 May 1996
• /
• pp.113-118
• /
• 1996

Nonlinear Attitude Dynamic Equation for rigid-body satellite is derived and linearzed. Estimator using Kalman filter and controller are designed. Controller using LQR technique implemented on satellite under torque disturbance shows much better performance than those by using of Bang-Bang technique.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.185-188
• /
• 1993

The goal of this paper is to develop an on-board controller for a model helicopter's hovering attitude control, using i8096 one-chip microcontroller. Required controller algorithm is programmed in ASM-96 assembly language and downloaded into an i8096 microcontroller. The performance of hovering flight using this system is verified by experiments with the model helicopter mounted on an instrumented flight stand where 3 potentiometers and an optical proximity sensor measure te attitude and main rotor speed of the helicopter.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2011년도 한국우주과학회보 제20권1호
• /
• pp.32.2-32.2
• /
• 2011

State dependent Riccati equation (SDRE) control technique has been widely used in the control society. Although it solves nonlinear optimal control problems, which minimizes state error and control efforts simultaneously, it has drawbacks when it is to be applied to the real time systems in that it requires much computational efforts. So the real time system whose computational ability is limited (for example, satellites) cannot afford to use SDRE controller. To solve this problem, a hybrid controller which is based on MSDRE (Modified SDRE) and ANFIS (Adaptive Neuro-Fuzzy Inference System) has been proposed by Abdelrahman et al. (2010). We propose a hybrid controller based on SDRE and ANFIS, and apply the hybrid controller to the hardware attitude simulator to perform a HIL (Hardware-In-the-Loop) simulation. Through HIL simulation, it is demonstrated that the hybrid controller satisfies the control requirement and the computation load is reduced significantly. In addition, the effects of statistical properties of the ANFIS training data to the performance of the ANFIS controller have been analyzed.

• International Journal of Aeronautical and Space Sciences
• /
• 제11권3호
• /
• pp.206-220
• /
• 2010

This paper proposes optimal control techniques for determining translational and rotational maneuvers that facilitate proximity operations and docking. Two candidate controllers that provide translational motion are compared. A state-dependent Riccati equation controller is formulated from nonlinear relative motion dynamics, and a linear quadratic tracking controller is formulated from linearized relative motion. A linear quadratic Gaussian controller using star trackers to provide quaternion measurements is designed for precision attitude maneuvering. The attitude maneuvers are evaluated for different final axis alignment geometries that depend on the approach distance. A six degrees-of-freedom simulation demonstrates that the controllers successfully perform proximity operations that meet the conditions for docking.

• International Journal of Aeronautical and Space Sciences
• /
• 제11권3호
• /
• pp.240-245
• /
• 2010

The controller of a model reference adaptive control monitors the plant's inputs and outputs to acknowledge its characteristics. It then adapts itself to the characteristics it encounters instead of behaving in a fixed manner. An important part of every adaptive scheme is the adaptive law for estimating the unknown parameters on line. A more precise model is required to improve performance and to stabilize a given dynamic system, such as a satellite in which performance varies over time and the coefficients change due to disturbances, etc. After model identification, the robust controller ($H{\infty}$) is designed to stabilize the rigid body and flexible body of a satellite, which can be perturbed due to disturbance. The result obtained by the $H{\infty}$ controller is compared with that of the proportional and integration controller which is commonly used for stabilizing a satellite.

• 제어로봇시스템학회논문지
• /
• 제21권1호
• /
• pp.14-20
• /
• 2015

This paper describes the design of a robust H-infinity attitude controller for a quad-rotor. The linear model of a quad-rotor was estimated using PEM (Prediction Error Minimization) method with experimental input and output data. To design an attitude controller, an extended plant was constructed by adjusting several uncertainties and weighting functions. An H-infinity controller was obtained by applying H-infinity methodology to the extended plant. Through frequency-domain analysis, it was shown that the designed controller can overcome uncertainties up to 75% of the plant model. The performance and robustness of the controller were verified through time-domain simulation.

• 한국항공우주학회지
• /
• 제32권3호
• /
• pp.88-94
• /
• 2004

KSR-III 로켓은 액체추진 엔진을 사용한 과학로켓이며, 추력 비행중 피치 및 요 자세제어를 위해 추력벡터제어 방식을 사용하고, 롤 자세를 제어하기 위해 냉가스 추력기를 사용하였다. 본 논문은 KSR-III 로켓의 3축 자세제어를 위해 설계된 자세제어기의 구조와 이득 스케쥴링, 자세 안정성 분석결과에 대해 소개한다. 설계된 자세제어기는 국산화 개발된 관성 항법시스템의 비행소프트웨어로 구현되었는데 비행시험에서 완벽히 작동하였다. 비행에서 측정된 데이터는 시뮬레이션 결과와 거의 일치되었다.

• 한국항공우주학회지
• /
• 제39권10호
• /
• pp.935-945
• /
• 2011

네 개의 반작용휠과 두 개의 제어모멘트자이로를 이용하여 X축 또는 Y축으로 위성을 고기동 시키는 자세제어방법에 대해서 연구해보았다. 일반적인 위성은 동일한 구동기들을 사용하므로 위성자세제어기를 먼저 설계하고 여기에서 나온 토크를 각 구동기에 할당하면 된다. 하지만 우리 위성은 출력토크 차이가 큰 반작용휠과 제어모멘트자이로로 이루어져 있기에 이러한 방법을 적용하는데 어려움이 있다. 이에 본 논문에서는 구동기 출력토크명령설계에 위성자세제어기를 포함시키는 방법을 사용하였다. 시뮬레이션을 통하여, 설계된 제어기법이 위성을 고기동 시키는 것을 확인하였다.