• 한국광학회지
• /
• 제8권6호
• /
• pp.456-460
• /
• 1997

링 레이저 공진기를 광학적으로 정렬하는 방법은 여러 가지가 있지만, 투과광 스펙트럼 측정법(cavity transmission spectrum control)은 측정이 매우 간단하고 공진기의 손실을 측정하면서 동시에 정렬을 할 수 있는 장점이 있다. 투과광 스펙트럼 측정법을 이용한 공진기의 광학적 정렬 장치를 구성하여, 레이저 자이로스코프에 사용할 링형 공진기에 모두 네 개의 반사경을 정렬 부착시켰으며, 동시에 정렬한 공진기의 내부 손실 값을 측정했다. 그 결과 최소 내부 손실은 0.98%였으며, 네 개의 반사경에 대한 총 반사 계수는 99.02%로 계산된다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.888-892
• /
• 2003

This study was tested for the bending stress analysis of Experimental stress analysis on various ankle foot orthoses(AFOs) was fulfilled. Stress was measured by Strain gages which were attached on 8 region in AFOs Results revealed that the peak compressive/tensile stress in the orthoses occured in the lateral region of neck. The Stress Analysis system was made by the electronic oscilloscope, strain gage sensors, amplifier, A/D converter, PC with C program It will be able to using the important data in splint design. Selected AFOs were some different materials but all have same shape except one type(orthosis with joint). C program Is used for managing data. Thus lateral side of the neck region is failed easily.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.836-841
• /
• 2004

Recently, the development of the paved track is required as a Low-maintenance of conventional line. The main reason is that the line capacity and bearing of track are increased progressively. The most important factor of paved track is stability and applicability. To be based on this subject, Cement Mortar Pouring(CMP) paved track is developed. CMP paved track is a kind of ballast reinforced track using the pre packed concrete technique. The most important to design is characteristics of the structure. CMP slab's thickness is less than the conventional slab track and pouring layer is attached tie and roadbed directly. On this paper, to verify the basic structure of the CMP track, characteristics of the structure is investigated pouring layer, tie and interaction of the each layer using the 3D finite elment analysis.

• 대한화학회지
• /
• 제13권1호
• /
• pp.56-61
• /
• 1969

By the chemical procedure and infra-red spectroscopy, the characteristics of humic acid were studied. The results were as follows: 1. Molecular weight. 5,200. 2. Molecular formula. $C_{240}H_{250}O_{120}N_{1O}$. 3. Rational formula. 4. Confirmation of the accurate structure of humic acid is beyond us nowadays. The structure is speculated that it may be a kind of condensed polymer of many benzene kerns in which above mentioned various functional groups are attached. Also some part of the large quantities of oxygen would be furan type carbonyl and aliphatic ethereal forms.

• 한국환경과학회지
• /
• 제25권10호
• /
• pp.1397-1405
• /
• 2016

Mussels are stubborn organism attached to solid substrate by byssus threads and caused operational problems in utility of power generating stations. Sole and combined usage of ultrasonic (28 kHz- and 42 kHz- frequencies) and hydrogen peroxide ($H_2O_2$) has studied for control of blue mussel larvae and adult stage in seawater condition. A theoretical wo rking model using disinfection (Chick and Watson type) approaches is presented based on helpful results of experiments. This study also demonstrate that the combined treatment (ultra-sonication with $H_2O_2$) is overall highly efficient than individual treatment would, but on the basis of exposure time, the ultra-sonication was the most efficient among them. Therefore the development of sole and combined technique might be effective practical mitigation strategy against mussel attachment for water handling facilities.

• 대한지리학회지
• /
• 제37권1호
• /
• pp.41-60
• /
• 2002

우리나라에 생활정보신문이 등장한지 10여년이 되어 모든 지역에서 유용한 지역생활정보 매체로 정착되었다. 생활정보신문은 그 유형에 따라 수요의 최소 인구규모를 바탕으로 그 배포지역을 형성하며, 그 배포지역은 부분적으로 시 .도 경계를 초월한 생활권을 중심으로 이루어지고 있다. 사업체가 입지한 지역에서 발간되는 생활 정보신문은 배부지역을 가지는데, 이것은 더 많은 소비자에게 정보 서비스를 제공하기 위한 보다 좁은 생활권의 영향에 의해 형성된 것이다.

• 한국수소및신에너지학회논문집
• /
• 제22권6호
• /
• pp.942-948
• /
• 2011

The performance of a supercharger for vehicle using solar cell attached on the exterior of a car, an auxiliary battery, and an air compressor was evaluated in this study. This supercharger is composed of a solar cell of 40W, a battery of 60 Ah, an air compressor of 17 A, 8 $kgf/cm^2$ and an air tank of 8L. It takes about 6 days to charge the battery with the solar cell and the high pressure air of 8L can be supplied about 70 times to engine intake with this battery. The intake pressure increased by about 20~40% with this supercharger. The vehicle power and accelerating performance are enhanced by 87% and 50% each in the low speed range. But the performance improved little in the high speed range because of the rather constant flow rate of air supplied by this type of supercharger.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.1485-1487
• /
• 2000

A variety of target configurations in sputtering process have been proposed to deposit various structures of thin film alloys and compound films. In this study, we presented the comparative experimental results regarding to the characterization of properties of Cu-Ni thin films deposited by using a magnetron co-sputtering method, as a function of target configurations; one is using a single target with varying the area of Ni chips attached on the Cu target and another is using a dual-type target with two targets of Ni and Cu separated each other. Structural(d-spacing, crystal orientation, crystallite size, cross-sectional morphology) and electrical(resistivity) properties of deposited films are characterized and compared as a function of target configurations as well as deposition conditions.

• 융합보안논문지
• /
• 제8권2호
• /
• pp.87-94
• /
• 2008

본 논문에서는 유도무기체계의 관성항법장치 기술에 대한 사항과 발전추세에 대해 연구하였다. 항법장치는 여러 곳에 일반적으로 많이 사용되고 있다. 그중 관성항법장치는 무기체계에 부착되어 사용됨에 따라 많은 관심들을 가지고 장치의 개발과 발전을 위한 연구가 가속화되고 있다. 따라서 본 논문에서는 유도무기체계 관성항법장치의 개발동향, 기능 및 구성, 종류, 작동기술에 대해 연구하였다.

• Journal of Mechanical Science and Technology
• /
• 제15권11호
• /
• pp.1555-1562
• /
• 2001

In a conventional shell-and-tube heat exchanger, fluid contacts with tubes flowing up and down in a shell, therefore there is a defect in the heat transfer with tubes due to the stagnation portions . Fins are attached to the tubes in order to increase heat transfer efficiency, but there exists a limit. Therefore, it is necessary to improve heat exchanger performance by changing the fluid flow in the shell. In this study, a highly efficient shell-and-tube heat exchanger with spiral baffle plates is simulated three-dimensionally using a commercial thermal-fluid analysis code, CFX4.2. In this type of heat exchanger, fluid contacts with tubes flowing rotationally in the shell. It could improve heat exchanger performance considerably because stagnation portions in the shell could be removed. It is proved that the shell-and-tube heat exchanger with spiral baffle plates is superior to the conventional heat exchanger in terms of heat transfer.