• 한국재료학회지
• /
• 제19권12호
• /
• pp.667-673
• /
• 2009

The electrocatalytic characteristics of oxygen reduction reaction of the $PtxM_{(1-x)}$ (M = Co, Cu, Ni) supported on multi-walled carbon nanotubes (MWNTs) have been evaluated in a Polymer Electrolyte Membrane Fuel Cell (PEMFC). The $Pt_xM_{(1-x)}$/MWNTs catalysts with a Pt : M atomic ratio of about 3 : 1 were synthesized and applied to the cathode of PEMFC. The crystalline structure and morphology images of the $Pt_xM_{(1-x)}$ particles were characterized by X-ray diffraction and transmission electron microscopy, respectively. The results showed that the crystalline structure of the Pt alloy particles in Pt/MWNTs and $Pt_xM_{(1-x)}$/MWNTs catalysts are seen as FCC, and synthesized $Pt_xM_{(1-x)}$ crystals have lattice parameters smaller than the pure Pt crystal. According to the electrochemical surface area (ESA) calculated with cyclic voltammetry analysis, $Pt_{0.77}Co_{0.23}$/MWNTs catalyst has higher ESA than the other catalysts. The evaluation of a unit cell test using Pt/MWNTs or $Pt_xM_{(1-x)}$/MWNTs as the cathode catalysts demonstrated higher cell performance than did a commercial Pt/C catalyst. Among the MWNTs-supported Pt and $Pt_xM_{(1-x)}$ (M = Co, Cu, Ni) catalysts, the $Pt_{0.77}Co_{0.23}$/MWNTs shows the highest performance with the cathode catalyst of PEMFC because they had the largest ESA.

• 한국동물학회지
• /
• 제22권4호
• /
• pp.153-164
• /
• 1979

A total of 352 specimens of congeneric species of Agkistrodon was collected and morphometric analysis and starch-gel electrophoresis were carried out in order to investigate the taxonomic status of this genus. The results obtained in this study are as follows: Morphometric analysis 1. Three species are recognized based on Gloyd's criteria. There was no specimen that was doubtful to classify correctly. Therefore, it seems that Gloyd's morphological characters are good criteria to identify each species. 2. All three species are sympatric at two localities (Mt. Seolag, Gangwon-do, and Mt. Deogyu, Jeonra-bugdo) and A. caligino년 and A. b. brevicaudus are sympatric at Gwangneung and Mt. Yongmun, Gyonggi-do. No hybrids were found in these sympatric localities. 3. Notable sexual dimorphism was found in meristic characters. 4. A. saxatilis has signicantly more number of ventrals and shorter tail ratio than other two species. 5. There were no significant meristic character differences between A. caligino년 and A. b. brevicaudus. Genetic analysis 1. Among 26 loci investigated, 12 loci (46.1%) were identical in their mobility, 4 loci (15.4%) were nearly identical with minor frequency differences, and 10 loci (38.5%) showed interspecific mobility difference. 2. The average proportion of polymorphic loci was 9.03%. This is considerably less than that of other vertebrates. 3. The average S and D values between species are .695 and .342 respectively. These values indicate that three taxa are distinct species. 4. A. caliginosus is genetically more related to A. saxatilis than to Agkistrodon, namely A. b. brevicaudus, A. caligino년 and A. saxatilis, as proposed by Gloyd. Far from being mere morphological variants, as suggested by Kang and Yoon (1975), they are highly distinctive evolutionary units.

• 한국재료학회지
• /
• 제8권8호
• /
• pp.678-684
• /
• 1998

정압분자동역학 시뮬레이션에 의하여 주기경계조건을 지닌 L-J 입자들로 구성된 계의 액체-유리-결정 전이를 연구하였다. 원자체적과 엔탈피는 가열 및 냉각과정에서 온도의 함수로 계산되었다. 반경분포함수로부터 유도된 Wendt-Abraham비와 단거리규칙도를 나타내는 각도분포함수를 분석하여 액체, 유리 및 결정상태를 구분하였다. 초기 fcc 결정을 가열하여 얻은 액체상은 급냉시에 비정질화하나 서냉시엔 결정화하였다. 급냉으로 생긴 유리는 다시 서서히 가열하면 fcc로 결정화하였다. 자유표면을 지닌결정은 표면에서부터 용해가 시작되어 벌크에 비하여 낮은 온도에서 녹고 냉각시에는 빠른 냉각속도에서도 결정화가 쉽게 일어나는 경향을 보였다.

• 한국수소및신에너지학회논문집
• /
• 제24권1호
• /
• pp.36-43
• /
• 2013

In this paper, a three-dimensional hydrogen desorption model is applied to a thin double-layered annulus ZrCo hydride bed and validated against the temperature evolution data measured by Kang et al. The present model reasonably captures the bed temperature evolution behavior and the 90% hydrogen discharging time. In addition, the performance of thin double-layered annulus bed is evaluated by comparing with a simple cylindrical bed using hydrogen desorption model. This study provides multi-dimensional contours such as temperature and H/M atomic ratio in the metal hydride region. This numerical study provides fundamental understanding during hydrogen desorption process and indicates that efficient design of the metal hydride bed is critical to achieve rapid hydrogen discharging performance. The present three-dimensional hydrogen desorption model is a useful tool for the optimization of bed design and operating conditions.

• 한국전기전자재료학회논문지
• /
• 제30권8호
• /
• pp.469-473
• /
• 2017

We investigated the effect of different thin-film thicknesses (25, 30, and 40 nm) on the electrical performance of solution-processed indium-zinc-oxide (IZO) thin-film transistors (TFTs). The structural properties of the IZO thin films were investigated by atomic force microscopy (AFM). AFM images revealed that the IZO thin films with thicknesses of 25 and 40 nm exhibit an uneven distribution of grains, which deforms the thin film and degrades the performance of the IZO TFT. Further, the IZO thin film with a thickness of 30 nm exhibits a homogeneous and smooth surface with a low RMS roughness of 1.88 nm. The IZO TFTs with the 30-nm-thick IZO film exhibit excellent results, with a field-effect mobility of $3.0({\pm}0.2)cm^2/Vs$, high Ion/Ioff ratio of $1.1{\times}10^7$, threshold voltage of $0.4({\pm}0.1)V$, and subthreshold swing of $0.7({\pm}0.01)V/dec$. The optimization of oxide semiconductor thickness through analysis of the surface morphologies can thus contribute to the development of oxide TFT manufacturing technology.

• 분석과학
• /
• 제10권1호
• /
• pp.35-42
• /
• 1997

Barium titanate 및 PZT와 같은 세라믹 축전물질의 분석을 위해 고압 산분해법을 이용한 시료 전처리 기술을 연구하였다. 질산이나 증류수를 첨가하고 염산의 농도를 변화시키면서, 이들 시료의 정량분석을 유도결합 플라즈마 방출분광법에 의해 수행하였다. 분석 결과를 보면 Ba, Mn, Zn, Si 등 대부분의 원소들은 염산의 농도에 영향을 받지 않으나, Nb와 Zr은 이에 민감한 것으로 밝혀졌다. 그러나 분해시간은 상대적으로 분석 결과에 거의 영향을 미치지 않았다. Nb의 경우에는 가장 좋은 분석 결과를 얻기 위해 염산과 증류수의 비가 3:1(v / v) 보다는 더 진해야 함을 알았다. 또한 Pb의 분석에 있어서 염산과 질산의 혼산을 사용하는 경우보다 붉은 염산만을 사용하였을 경우에 더 좋은 분석 결과를 나타내었다.

• 한국항공우주학회지
• /
• 제44권9호
• /
• pp.789-795
• /
• 2016

이차 추진제로 많이 쓰이는 알루미늄을 고출력 레이저를 조사하여 공기 중의 산소와 반응시켜 발생되는 알루미늄과 산소의 화학 반응을 레이저 분광분석법을 이용하여 연구를 수행 하였다. 7ns의 펄스 주기와 1064nm의 주파수를 가진 Q-switched Nd:YAG 레이저로 40 - 2500mJ($6.88{\times}10^{10}-6.53{\times}10^{11}W/cm^2$)의 에너지가 공급되었으며, 플라즈마 빛은 echelle 회절 분광기와 ICCD 카메라로 감지하였다. 분광분석을 통하여 알루미늄과 산소의 원자/분자 신호 분석과 현상이 일어나는 플라즈마 환경의 특성 연구를 위해 들뜸 온도(2200K~6600K) 및 전자밀도($3.15{\times}10^{15}{\sim}2.38{\times}10^{16}cm^{-3}$) 계산, 그리고 알루미늄 표면의 크레이터(Crater) 분석을 수행하였다. 본 연구는 고 레이저 복사 조도 환경하에서 발생되는 화학 반응과 플라즈마의 특성을 파악하는 방법을 제시하고 있다.

• Applied Biological Chemistry
• /
• 제38권6호
• /
• pp.490-495
• /
• 1995

Cellulomonas sp. KL-6 균주가 생산하는 cellulase 중 CMCase나 FPase는 세포외로 다량 분비되나 ${\beta}-glucosidase$는 cell bound form으로 존재하여 배양액에서의 생산은 극히 미약하였다. CMCase와 FPase는 배양 5일째에, ${\beta}-glucosidase$는 배양 4일째에 각각 최대생산을 나타내었다. $CaCO_3(0.1%)$가 첨가된 효소생산 최적조건에서 CMCase는 $82\;unit/m{\ell}$를, FPase는 $80\;unit/m{\ell}$를 그리고 ${\beta}-glucosidase$는 $1.2\;unit/m{\ell}$를 각각 생산하였고 이는 기본배지에서 보다 $60{\sim}70%$의 생산증가를 가져왔다. KL-6 균주는 lignase와 laccase의 생산은 없었다.

• 한국전기전자재료학회논문지
• /
• 제33권6호
• /
• pp.454-459
• /
• 2020

In this study, a TiO₂/TiO_2-x-based resistance variable memory was fabricated using a DC/RF magnetron sputtering system and ALD. In order to analyze the effect of oxygen plasma treatment on the performance of resistance random access memory (ReRAM), the TiO₂/TiO_2-x-based ReRAM was evaluated by applying RF power to the TiO_2-x oxygen-holding layer at 30, 60, 90, 120, and 150 W, respectively. The ReRAM was fabricated, and the electrical and surface area performances were compared and analyzed. In the case of ReRAM without oxygen plasma treatment, the I-V curve had a hysteresis curve shape, but the width was very small, with a relatively high surface roughness of the oxygen-retaining layer. However, in the case of oxygen plasma treatment, the HRS/LRS ratio for the I-V curve improved as the applied RF power increased; stable improvement was also noted in the surface roughness of the oxygen-retaining layer. It was confirmed that the low voltage drive was not smooth due to charge trapping in the oxygen diffusion barrier layer owing to the high intensity ReRAM applied with an RF power of approximately 150 W.

• 한국전기전자재료학회논문지
• /
• 제15권1호
• /
• pp.67-74
• /
• 2002

A phosphor for Plasma Display Panel, BaMgAl$_{10}$ O$_{17}$ :Eu$^{2+}$, showing a blue emission band at about 450nm was prepared by a solid-state reaction using BaCO$_3$, $Al_2$O$_3$, MgO, Eu$_2$O$_3$ as starting materials wish flux AlF$_3$. The study of the behaviour of Eu in BAM phosphor was carried out by the photoluminescence spectra and the Rietveld method with X-ray and neutron powder diffraction data to refine the structural parameters such as lattice constants, the valence state of Eu, the preferential site of Mg atom and the site fraction of each atom. The phenomenon of the concentration quenching was abound 2.25~2.3wt% of Eu due to a decrease in the critical distance for energy transfer of inter-atomic Eu. Through the combined Rietveld refinement, R-factor, R$_{wp}$, was 8.11%, and the occupancy of Eu and Mg was 0.0882 and 0.526 at critical concentration. The critical distance of Eu$^{2+}$ in BAM was 18.8$\AA$ at 2.25% Eu of the concentration quenching. Furthermore, c/a ratio was decreased to 3.0wt% and no more change was observed over that concentration. The maximum entropy electron density was found that the modeling of $\beta$-alumina structure in BaMgAl$_{10}$ O$_{17}$ :Eu$^{2+}$correct coincided showing Ba, Eu, O atoms of z= 1/4 mirror plane.e.ane.e.