• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2017년도 춘계학술논문요약집
• /
• pp.387-388
• /
• 2017

• Nuclear Engineering and Technology
• /
• 제45권7호
• /
• pp.871-894
• /
• 2013

KAERI (Korea Atomic Energy Research Institute) has been operating an integral effect test facility, the Advanced Thermal-Hydraulic Test Loop for Accident Simulation (ATLAS), for transient and accident simulations of advanced pressurized water reactors (PWRs). Using ATLAS, a high-quality integral effect test database has been established for major design basis accidents of the APR1400 plant. A Domestic Standard Problem (DSP) exercise using the ATLAS database was promoted to transfer the database to domestic nuclear industries and contribute to improving a safety analysis methodology for PWRs. This $2^{nd}$ ATLAS DSP (DSP-02) exercise aims at an effective utilization of an integral effect database obtained from ATLAS, the establishment of a cooperation framework among the domestic nuclear industry, a better understanding of the thermal hydraulic phenomena, and an investigation into the possible limitation of the existing best-estimate safety analysis codes. A small break loss of coolant accident with a 6-inch break at the cold leg was determined as a target scenario by considering its technical importance and by incorporating interests from participants. This DSP exercise was performed in an open calculation environment where the integral effect test data was open to participants prior to the code calculations. This paper includes major information of the DSP-02 exercise as well as comparison results between the calculations and the experimental data.

• Nuclear Engineering and Technology
• /
• 제53권12호
• /
• pp.4114-4121
• /
• 2021

The Rooppur Nuclear Power Plant (RNPP), the first nuclear power plant in Bangladesh with a capacity of 2.4 GWe, is under construction on the bank of the river Padma, at Rooppur in Bangladesh. Measurement of background radioactivity in the natural environment adjacent to RNPP finds great importance for future perspectives. Soil and sediment samples collected from upstream and downstream positions of the Padma River (adjacent to RNPP) were collected and analyzed by HPGe gamma-ray spectrometry for primordial radionuclides. The average activity concentrations (in Bqkg^-1) of ²²⁶Ra, ²³²Th and ⁴⁰K radionuclides in soil samples were found to be 44.99 ± 3.89, 66.28 ± 6.55 and 553 ± 82.17 respectively. Respective values in sediment samples were found to be 44.59 ± 4.58, 67.64 ± 7.93, 782 ± 108. Relevant radiation hazard indices and dosimetric parameters were calculated and compared with the world average data recommended by US-EPA. Analytical results show non-negligible radiation hazards to the surrounding populace. Measured data will be useful to monitor any change of background radioactivity in the surrounding environment of RNPP following its operation for the generation of nuclear energy.

• Nuclear Engineering and Technology
• /
• 제31권6호
• /
• pp.631-637
• /
• 1999

The module LEAPR of NJOY data processing system has been improved to have the capability of computing the thermal elastic scattering cross sections for silicon, which has a diamond-like structure. Silicon lattice was assumed as an fcc lattice with two atoms at each lattice point. The calculation formulas for thermal neutron elastic scattering by silicon were introduced and incorporated into LEAPR, and then the scattering cross sections for silicon were computed. The results were compared with experimental data, and they were found to give a good agreement with experimental data.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.32-32
• /
• 2010

Since the characteristics of plasmas depend strongly on the interactions between plasma particles such as electron, ions, and neutrals, a well-established atomic and molecular database is needed to understand and produce various types of plasma. Thus, National Fusion Research Institute (NFRI) started to establish the plasma property DB for fusion and industrial plasma from last 2002. Here we describe our recent data evaluation activities regarding to production of atomic and molecular data that are needed for modeling plasma in fusion tokamaks and also low temperature industrial plasmas.

• Nuclear Engineering and Technology
• /
• 제34권4호
• /
• pp.406-414
• /
• 2002

In TSPA of long-term post closure radiological safety on permanent disposal of HLW in Korea, appropriate management of input and output data through QA is necessary. The robust QA system is developed using the T2R3 principles applicable for five major steps in R&D＇s. The proposed system is implemented in the web-based system so that all participants in TSPA are able to access the system. In addition, the internet based input database for TSPA is developed. Currently data from literature surveys, domestic laboratory and field experiments as well as expert elicitation are applied for TSPA.

• 에너지공학
• /
• 제13권3호
• /
• pp.181-190
• /
• 2004

Computational models for analyzing the in-reactor behavior of metallic fuel pins under transient conditions in liquid-metal reactors are developed and implemented in the TRAMAC (TRAnsient thermo-Mechanical Analysis Code) for a metal fuel rod under transient operation conditions. Not only the basic models for a fuel rod performance but also some sub-models used for transient condition are installed in TRAMAC. Among the models, a fission gas release model, which takes the multi-bubble size distribution into account to characterize the lenticular bubble shape and the saturation condition on the grain boundary and the cladding deformation model have been developed based mainly on the existing models in the MAC-SIS code. Finally, cladding strains are calculated from the amount of thermal creep, irradiation creep, and irradiation swelling. The cladding strain model in TRAMAC predicts well the absolute magnitudes and gen-eral trends of their predictions compared with those of experimental data. TRAMAC results for the FH-1,2,6 pins are more conservative than experimental data and relatively reasonable than those of FPIN2 code. From the calculation results of TRAMAC, it is apparent that the code is capable of predicting fission gas release, and cladding deformation for LMR metal fuel finder transient operation conditions. The results show that in general, the predictions of TRAMAC agree well with the available irradiation data.

• Nuclear Engineering and Technology
• /
• 제55권8호
• /
• pp.2844-2853
• /
• 2023

A sophisticated Bayesian multilevel model for estimating group bias was developed to improve the utility of the ASTM E900-15 embrittlement trend curve (ETC) to assess the conditions of nuclear power plants (NPPs). For multilevel model development, the Baseline 22 surveillance dataset was basically classified into groups based on the NPP name, product form, and notch orientation. By including the notch direction in the grouping criteria, the developed model could account for TTS differences among NPP groups with different notch orientations, which have not been considered in previous ETCs. The parameters of the multilevel model and biases of the NPP groups were calculated using the Markov Chain Monte Carlo method. As the number of data points within a group increased, the group bias approached the mean residual, resulting in reduced credible intervals of the mean, and vice versa. Even when the number of surveillance test data points was less than three, the multilevel model could estimate appropriate biases without overfitting. The model also allowed for a quantitative estimate of the changes in the bias and prediction interval that occurred as a result of adding more surveillance test data. The biases estimated through the multilevel model significantly improved the performance of E900-15.

• 환경영향평가
• /
• 제22권1호
• /
• pp.89-97
• /
• 2013

RADCONS Ver. 1.0 (RADiological CONSequence Assessment Program) was developed for radiological risk assessment in this study. A Gaussian plume model was used to analyze the fate and transport of radionuclides released into the air in case of accidents. Both single meterological data and time series meterological data can be used in RADCONS. To assess the radiological risk of the early phase after an accident, ED (Effective Dose) estimated by both deterministic and probabilistic approaches are presented. These EDs by deterministic and probabilistic will be helpful to efficient decision making for decision makers. External doses from deposited materials by time are presented for quantifying the effects of mid and late phases of an accident. A radiological risk assessment was conducted using RADCONS for an accident scenario of 1 Ci of Cs-137. The maximum of ED for radii of 1,000 meters from the accident point was 8.51E-4 mSv. After Monte-Carlo simulation, considering the uncertainty of the breathing rate and dispersion parameters, the average ED was 8.49E-4, and the 95 percentile was 1.10E-3. A data base of the dose coefficients and a sampling module of the meteorological data will be modified to improve the user's convenience in the next version.

• Journal of Radiation Protection and Research
• /
• 제20권2호
• /
• pp.117-122
• /
• 1995

한국원자력연구소 부지에는 연구용 원자로, 원전연료, 가공시설 등 여러 원자력시설이 운영되고 있다. 이들 시설로부터 방사성물질이 누출되는 경우 방사성물질의 대기중 확산, 이동, 침적 등의 환경내 거동을 해석하기 위해 한국원자력 연구소에서는 기상정보 인지시스템 (MDAS) 및 처리시스템 (MIPS)을 개발하여 운영하고 있다. MIPS에서는 각 기상정보를 쉽게 파악할 수 있도록 컴퓨터 화면상에 그래픽으로 순간 및 시간에 따른 관측치의 변화량을 제시할 수 있게 하였다. 이러한 MDAS와 MIPS는 자체 개발된 실시간 방사선 피폭해석시스템 (FADAS)과 온라인으로 연결되어 만일의 원자력시설의 사고 시 주변주민의 대피 또는 소개 등 신속한 비상대응책의 결정에도 매우 유용하게 이용할 수 있다