• Journal of Korean Tunnelling and Underground Space Association
• /
• v.21 no.4
• /
• pp.455-478
• /
• 2019

In this paper, we conducted experimental investigation on the field applicability through the verification of reinforcement effect of the steel pipe reinforcement grouting using high strength steel pipe. SGT275 (formerly known as STK400) steel pipe is generally applied to the traditional steel pipe reinforcement grouting method. However, the analysis of tunnel collapse cases applying the steel pipe reinforcement grouting shows that there are cases where the excessive bending and breakage of steel pipe occur. One of the reasons causing these collapses is the lack of steel pipe stiffness responding to the loosening load of tunnels caused by excavation. The strength of steel pipe has increased due to the recent development of high strength steel pipe (SGT550). However, since research on the reinforcement method considering strength increase is insufficient, there is a need for research on this. Therefore, in this study, we conducted experiments on the tensile and bending strength based on various conditions between high strength steel pipe, and carried out basic research on effective field application depending on the strength difference of steel pipe through the conventional design method. In particular, we verified the reinforcement effect of high strength steel pipe through the measurement results of deformed shape and stress of steel pipe arising from excavation after constructing high strength steel pipe and general steel pipe at actual sites. The research results show that high strength steel pipe has excellent bending strength and the reinforcement effect of reinforced grouting. Further, it is expected that high strength steel pipe will have an arching effect thanks to strength increase.

• The korean journal of orthodontics
• /
• v.3 no.1
• /
• pp.21-28
• /
• 1972

저자는 direct bonding system의 pretreatment액 처리후 Epoxy adhesive의 bonding strength의 변화를 측정하기 위해서 발거된 상악 전치 진면 법랑질 표면에 pretreatment액으로서 $65\%$ phosphoric acid를 도포한 실험군과 도포하지 않은 비교군을 비교연구하고 임상에 적용하여 다음과 같은 결과를 얻었다. 1. 법랑질 표면에 pumicing과 $65\%$ phosphoric acid를 도포했을때 joint strength는 현저히 상승했다. 2. Epoxy adhesive의 bonding strength는 plastic attachment를 치아면에 접착유지시키기에 충분하며 임상적으로 이용할 수 있다. 3. Joint area가 클 수록 bonding strength는 증가했다.

• Water for future
• /
• v.6 no.1
• /
• pp.13-18
• /
• 1973

If the temperature of free water drops below the freezing point the water turns into ice and its volume increases. Analyzing of the results in test, it is hoped that these is broadly used in engineering plan. The compressive strength of frozen soils and the unconfined compressive strength of the ice. The creep strength depends on factors including creep ratio, time, strain and temperature. For a linear decreases in temperature, strength predicts an exponential increasing. The relationships between dry unit weight and compressive strength, water content and freezing with compacted soil samples, have been analyzed to understand the strength of frozen soil. Therefore, it is thankful that the results of analsis shall find useful application as a framework for generalizing experimental information as well as a basis for solving various frozen soil mechanics problems.

• Journal of Korean Association for Spatial Structures
• /
• v.7 no.3 s.25
• /
• pp.119-124
• /
• 2007

Due to the deficit of section of web, the buckling strength of cellular beam become smaller than that of H-beam. In this thesis, we evaluate the buckling strength of web-post through non-linear F.E.M with opening distance-diameter ratio and opening diameter - web thickness ratio as essential variables. And also analyzes this comparing with the standard indicated in BS5950 Part 1.

• Journal of the Korean Home Economics Association
• /
• v.11 no.4
• /
• pp.363-373
• /
• 1973

The Sewability was tested with the seam strength and Puckering Grade by a general sewing machine according to some properties of simulated Leather, yarn tensile strength needle and stitches. The main results tested are as follows ; 1. The thick and uncomfortable leather is unable to be sewed by a general sewing machine, but the thin and soft one is able to. 2. The interval between stitches depends on type of leather used, and the variance in accordance with type of leather varies much more in the case of narrower interval. 3. When the sewability of leather-surface is not so good, is desirable to pour oil on the surface for the purpose of better efficiency. 4. The seam strength is directly proportional to interval of stitch and tensile strength of yarn and leather used, and needle No. 14 is more effective than No.1l. 5. The more the soft and thin leather is, the lower the Puckering Grade becomes. Type of yarn and interval of stitches do not seem to effect the Puckering Grade.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.5
• /
• pp.23-29
• /
• 2013

Various properties of cotton handsheet were measured to solve the problem of deformation while storing guar gum(natural polymer) and to improve strength and retention by synthetic polymers(A-PAM, C-PAM, CMC). The results of this study were summarized as follow. The cotton handsheet with 0.2% of A-PAM showed the best tensile index and folding endurance. Retention of fines and fillers in pulp slurry with 0.2% and 0.3% of A-PAM were more excellent than that with guar gum.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.38 no.4 s.117
• /
• pp.61-67
• /
• 2006

The effect of several inorganic flame-retardants such as ammonium phosphate, ammonium sulfate, aluminum hydroxide and antimony trioxide on the flame-retardant property and tensile strength of paper has been investigated. Flame-retardants were used preferably as a dry powdered mixture and added to the furnish. Both dipping and coating treatments were employed to apply flame-retardants to paper Flame-retardant paper was manufactured by treatment of $5{\sim}30%$ flame-retardants by weight of the paper on a dry weight. Paper's flame-retardant property and tensile strength were examined by comparison of char length and tensile index. As dosages of flame-retardant chemicals increased, flame-retardant property was improved but tensile index was decreased.

• Journal of the Korean Professional Engineers Association
• /
• v.23 no.6
• /
• pp.117-122
• /
• 1990

The effect of firing on the development of strength of china with maturing range of a series of glaze that gave no defect on firing was observed in an electrical furnace and oil-fired kiln. The body formular is as follows (equation omitted), and it was applied to a selected china body. Porcelain glaze formular is in the following. (equation omitted) The result obtained is sumarized as follows : (1) It was found that the strength of porcelain increases when the A1$_2$O$_3$ moles of the glaze increses, and the strength of porcelain decreases when the SiO$_2$ moles of glaze decreases at 3.9-5.9 moles, and increases again when the SiO$_2$ moles increases at 5.9-7.9 notes. (2) It was found the most safe glaze is No. 25 glaze.

• Journal of the Korean Professional Engineers Association
• /
• v.30 no.6
• /
• pp.113-120
• /
• 1997

This subject,'S" apartment structural frame has not been achieved without considerable effort by all quality controller involved. Therefore, it is appropriate at this time to report by all the fact of concrete quality control in our site. These are emphasized that the average strength of placed concrete must always exceed the specified value of design strength used in the structural design phase. In general, quality of ready mixed concrete largely depends not only upon the manner of production and proper observance of recognized methods of placement, finishing, curing, transportation etc. ,but also many kinds of influential factors even more handling of the test procedure, As this practical report, approaching to judgement by analysis of sampled specimens in site weather placed concrete have satisfied quality compare the specified strength with the target strength which is applied to standard deviation related with influential factors as above mentioned. This case study is consist of 1) A foreword, 2) Site brief, 3) A precondition for analysis, 4) A formulas derivation and quality analysis, 5) Economic gains by the coefRcient of increase and 6) A conclusion.sion.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.35 no.3
• /
• pp.29-36
• /
• 2003

Reducing the energy consumption while maintaining pulp quality is an important objective of today's paper industry. Enzymatic treatment of fibers and the application of dry strength agent were investigated as methods to reduce energy consumption during refining and to upgrade fiber characteristics. Modification of recycled fibers with an enzyme was effective in improving relining efficiency and reducing refining energy. Optimization of dry strength agent application conditions including stock pH, cationic demand, zeta potential, etc. were found to be very important for improving its effectiveness.