• 대한안전경영과학회지
• /
• 제9권2호
• /
• pp.1-8
• /
• 2007

Safety check-up and individual education, safety status wishes to present included safety assessment table for safety management assessment system construction about unit work process in Study. Safety management assessment table gives each grades about worker of unit work process, safety check-up, education, management and identifies merits and demerits of unit work process, it is that propose safety management assessment system that can reduce accident occurrence possibility.

• 시스템엔지니어링학술지
• /
• 제6권1호
• /
• pp.1-13
• /
• 2010

KC-100 is a 4 seats, single piston engine, civil aircraft whose type certificate is applied for KAS 23 (FAR 23) for the first time in Korea. Its system safety assessment and analysis have been conducted to meet the minimum safety requirement in KAS 23 and to verify the safety of equipment, system, and installation in accordance with the requirement of ${\S}$23.1309 and the guidelines in FAA AC 23.1309-1D and SAE ARP 4761. This safety assessment begins with the FHA (Functional Hazard Assessment) at aircraft and system level in preliminary design phase, and all of the safety assessment and analysis reports including the preliminary version of SSA (System Safety Assessment) have been prepared during detail design phase. The revised version of these safety reports will be approved by Airworthiness Authority through the ground and flight test phases. In this paper, the safety assessment requirement in ${\S}$23.1309, safety assessment guideline in AC 23.1309-1D, and safety assessment and analysis methods in ARP 4761 will be explained based on the application example for KC-100 development. The experience and knowledge of this system safety assessment for civil aircraft can be applied to commuter aircraft of FAR 23 class or large transport airplane of FAR 25 class.

• Nuclear Engineering and Technology
• /
• 제53권8호
• /
• pp.2600-2609
• /
• 2021

Low cycle fatigue behaviors of SA508-3 low-alloy steel were investigated in room-temperature air, high-temperature air and in light water reactor (LWR) water environments. The fatigue mean curve and design curve for the low-alloy steel are developed based on the fatigue data in room-temperature and high-temperature air. The environmental fatigue model for low-alloy steel is developed by the environmental fatigue correction factor (F_en) methodology based on the fatigue data in LWR water environments with the consideration of effects of strain rate, temperature, and dissolved oxygen concentration on the fatigue life.

• 한국환경보건학회지
• /
• 제50권2호
• /
• pp.138-145
• /
• 2024

Background: Appropriateness issues have emerged regarding the non-application of hazardous substance safety standards for items classified as 'other textile products'. Objectives: Testing for formaldehyde (HCHO) and risk assessment were conducted on 'other textiles products' to provide reference data for promoting product safety policies. Methods: Testing was conducted on five items (102 products) classified as 'other textile products' according to relevant standards (textile products safety standards), and the risk of each product was assessed using the evaluation methodologies of the European Centre for Ecotoxicology and Toxicology of Chemicals (ECETOC) and European Chemical Agency (ECHA). Results: Out of the 102 products tested, HCHO was detected above the quantification limit in five. Based on these results, the screening risk assessment indicated that three products exceeded the criteria. Upon reassessing the emission and transfer rates of products exceeding the criteria, it was confirmed that there were no instances of exceeding the criteria. Conclusions: Risk assessment results can be used as supporting data for non-application of hazardous substance standards. However, it is deemed necessary to transition towards a management approach based on risks in order to addressing emerging trends such as convergence/new products.

• 항공우주시스템공학회지
• /
• 제7권2호
• /
• pp.29-34
• /
• 2013

Safety requirements for aircraft and system functions include minimum performance constraints for both availability and integrity of the function. These safety requirements should be determined by conducting a safety assessment. The depths and contents of aircraft system safety assessment vary depending on factors such as the complexity of the system, how critical the system is to flight safety, what volume of experience is available on the type of system and the novelty and complexity of the technologies being used. Requirements that are defined to prevent failure conditions or to provide safety related functions should be uniquely identified and traceable through the levels of development. This will ensure visibility of the safety requirements at the software and electronic hardware design level. This paper has prepared to study on promoting the efficiency of establishing hierarchical safety requirements from aircraft level function to item level through system safety processes.

• 전기학회논문지
• /
• 제66권1호
• /
• pp.249-254
• /
• 2017

This paper presents an assessment system of safety level of 22.9kV grade high voltage electrical facilities considering environmental factors. The assessment system was developed based on the following procedure. Firstly, assessment structure was determined by consulting standards regarding inspection and diagnosis of electrical facilities. Secondly, contents of items and sub items of assessment system were developed. Thirdly, in order to quantify the importance of the assessment system, the weight was calculated using Analytic Hierarchy Process(AHP). Lastly, assessment table of safety level was developed including environmental factors such as period of use and load factor. The developed system can evaluate the safety level of high voltage facilities in an objective way. Therefore it can be applicable to electrical safety management system based on Internet of Things(IoT).

• 한국안전학회지
• /
• 제26권6호
• /
• pp.111-117
• /
• 2011

Risk-based railway safety management has been mandatory in Korea as by relevant laws and regulations enacted since the Railway Safety Act 2004. In particular, the Railway Vehicle Safety Guidance came into effect on Jan 1, 2008 specifies the details of methodology for hazard analysis, risk assessment and safety verification and validation. Fundamentals for success of the risk-based safety management are systematic hazard identification and risk assessment by use of reasonable risk assessment criteria, but the principle of risk-based safety management has not been applied in an effective way to introduction and maintenance of railway vehicle systems because definite risk assessment criteria have not been set down for each railway system or railway network. The purpose of this study is to suggest a risk matrix development principle for risk assessment of domestic urban metro vehicles by analyses of relevant rules and railway operating environment of Korea.

• 시스템엔지니어링학술지
• /
• 제19권1호
• /
• pp.29-38
• /
• 2023

Independent Safety Assessment (ISA) is a third-party assessment that is to confirm that the system satisfies the safety requirements in the defined operational context. The process of this assessment often brings about many complex arguments that should be supported by evidence and justification. The communication between arguments and evidence is of the most importance in the context of safety case. This study illustrates how NOR-STA can be used for ISA process, showing the effective structure of safety compliance. The study outlines the steps to breaks down the top goal into many elements such as arguments, sub-goals, justification, context and assumptions. It concludes that the evidence-based safety conformance process utilizing NOR-STA provides a more effective and systematic representation of the independent safety assessment process in conformance cases.

• 한국압력기기공학회 논문집
• /
• 제10권1호
• /
• pp.25-30
• /
• 2014

Korea Hydro & Nuclear Power Co.,LTD(KHNP) was strongly interested in promotion of employee's Safety Culture because it is needed to change the recognition of Safety Culture after the Fukushima accident and Kori-1 blackout event. So, KHNP developed the KHNP Safety Culture Definition, Principles and Attributes and shared them with all employees. By using them, Safety Culture Assessment for a site plant employees was carried out. Through the pilot Safety Culture Assessment in 2012, In 2013, it was expanded to 6 plants and various improvements had been obtained from that. KHNP has been developing a variety of training materials, Safety Culture posters, videos which was designed to give lessons about safety culture with a variety of event cases. And keep trying to form Safety Culture Circumstances In this study, statistic methods are used to verify the effectiveness of KHNP Safety Culture Principles and Safety Culture Assessment.

• Nuclear Engineering and Technology
• /
• 제56권5호
• /
• pp.1887-1894
• /
• 2024

Fatigue strength of the structural materials of lead-cooled fast reactors (LFRs) and accelerator-driven systems (ADS) may be degraded in liquid metal (Lead or lead-bismuth eutectic (LBE)) environments. The fatigue crack growth (FCG) data of structural materials in liquid LBE are necessary for damage tolerance design, safety assessment and life management of key equipment. A novel monitoring system for fatigue crack length was designed on the compliance method and the monitor technology of crack opening displacement (COD) of CT specimens by the linear variable differential transformers (LVDT) system. It can be used to predict the crack length by monitoring the COD of CT specimens in harsh high-temperature liquid LBE using a LVDT system. The prediction accuracy of this system was verified by FCG experiments in room temperature air and liquid LBE at 150, 250 and 350 ℃. The first results obtained in the FCG test for T91 steel in liquid LBE at 350 ℃ are presented.