• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1996년도 봄 학술발표회 논문집
• /
• pp.225-231
• /
• 1996

The dense graded asphalt concrete materials have been used for construction of pavement for a long time. The performance of asphalt concrete pavement, however, is influenced by various factors including high temperature and heavy axle loads which cause plastic deformation. The plastic deformation is one of the main functional disadvantages of flexble pavement. In this study, the semi-rigid pavement is considered to solve the problem. A set of experimental evaluation on semi-rigid pavement material has been coducted in laboratory to obtain it's physical properties and serviceabilities. The results of tests, including compressive strength, flexural strength, ravelling and wheel tracking, show that the semi-rigid pavement has a good mechanical properties and serviceabilities. Consequently, the semi-rigid pavement may be suitable to bridge deck, tunnel, slow lane and parking area pavements.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 봄 학술발표회 논문집
• /
• pp.663-668
• /
• 1997

In Korea, the temperature of winter seasons are really severe and cause lot's of snow-falling and iceing in the pavements. Several de-iceing mehtod have generally been adopted to melt the ice on the surface of pavement. Therefore, the Study of experimental in the first stage was given to the verification of the icers's effects. First, Contrete and asphalt pavement specimens were made and scattered with a CaC2-deicers. then 3cm and 5cm thickness of artificial snow were prepared on the surface of specimens. It reveals that the early calorification due to de- icers as high as the temperature of laboratory increases within about 10 minutes and last for more then 2 hours and the test of ice-formation on the surface of contrete and asphalt specimen due to snow leads to the similar rate of freezing time about 20 minutes. Second, three kinds of de-icers, such as CaC2 CaC2+Nacl, Cacl Flaket are rested in the snowy highway to check the iceing-resistance. The CaC2 is proved to be the most effective de-icers so far.

• 한국재난정보학회 논문집
• /
• 제5권1호
• /
• pp.30-44
• /
• 2009

Asphalt concrete pavements are often destroyed within the intended design life due to the increasement in traffic volume. The most common types of asphalt concrete pavement damages are permanent deformation and fatigue cracking, and so on. In this research, characteristics of traffic loadings and lateral wheel path distributions are analyzed using the field survey on traffic flow. The obtained traffic characteristics can be used to the decision making for the maintenance policy of roads. According to the traffic lane analysis for the 2nd and 3rd lanes, inner lane vehicles tended to pass to the right side to avoid the opposite side vehicles. In addition, the outside lane vehicles were deviated to the left side to avoid passengers. It is also noted that the lateral wheel path distributions was close to the normal distribution.

• 한국환경과학회지
• /
• 제24권10호
• /
• pp.1265-1272
• /
• 2015

To investigate the thermal environment over the summertime asphalt pavements, an automatic weather observation system was installed at a parking lot paved with asphalt to observe various meteorological parameters and surface temperature from July 1 to September 30, 2014. Since the number of rainy days in summer of 2014 particularly after the mid July is more than that of average data, a ratio of daily peak surface temperature above $45^{\circ}C$ was 28% which was lower than the average. The observational data about hourly average surface temperature and various heat balance factors at days where daily peak surface temperature is above $45^{\circ}C$ are as follows: An hour that had the daily maximum temperature was around 15 pm and the value was $49^{\circ}C$ approximately. Net shortwave radiation was the highest at 12pm as $800W/m^2$ and much radiation of $500W/m^2$ was absorbed at the ground between 11am and 17pm. Sensible heat that was delivered from the ground to the atmosphere was evaluated as $200W/m^2$ between 10am and 19pm. underground transfer heat up to $100W/m^2$ was measured as negative from 19pm to the next day 8am, which indicated the lower atmosphere was heated at night.

• 한국도로학회논문집
• /
• 제14권4호
• /
• pp.1-8
• /
• 2012

PURPOSES : Skid resistance on pavements plays an important role in reducing the risk of vehicle skidding on wet surface particularly. Almost 9.3 percent of traffic accidents were occurred under rainy condition and these are over-represented in terms of the severity of the crashes. Recently, unusual weather conditions referred widely as the intensified rainfalls justify the need of a systematic management of skid resistance. In this context, the study carried out the observational study on the skid resistance characteristics of different types of pavement with the time passage. METHODS : This study measured the skid resistance with Pavement Friction Tester at three times within five years. The skid resistance measurement has followed the method suggested by ASTM. RESULTS : As the main results under the scope of this study, skid resistance of asphalt concrete has not nearly reduced with time. On the contrary, skid resistance of cement concrete has been rapidly reduced with time though the highest resistance was gained at the early observation. Porous asphalt concrete shows a steady decrease of skid resistance with time, anyway, the reduction rate according to the increase of measurement speeds is relatively lower than the others. CONCLUSIONS : Based on our study, skid resistance of the pavement should be regarded as one of the pavement management system, so periodic measurement should be made to assure road safety as a whole.

• Structural Engineering and Mechanics
• /
• 제62권3호
• /
• pp.357-364
• /
• 2017

This paper presents the results of a study that investigated the improvement of the mechanical properties of coarse and fine recycled asphalt pavement (RAP) produced by adding silica fume (SF) with contents of 5%, 10%, and 15% by total weight of the cement. The coarse and fine natural aggregate (NA) were replaced by RAP with replacement ratio of 20%, 40% and 60% by the total weight of NA. In addition, SF was added to NA concrete mixes as a control for comparison. Twenty eight mixes were produced and tested for compressive, splitting tensile and flexural strength at the age of 28 days. The results show that the mechanical properties decrease with as the content of RAP increases. And the decrease in the compressive strength was more in the fine RAP mixes compared to the coarse RAP mixes, while the decrease in the splitting tensile and flexural strength was almost the same in both mixes. Furthermore, using SF enhances the mechanical properties of RAP mixes where the optimum content of SF was found to be 10%, and the mechanical properties enhancement of coarse RAP were better than fine RAP mixes. Accordingly, the RAP has the potential to be used in the concrete pavements or in other low strength construction applications in order to reduce the negative impact of RAP on the environment and human health.

• International Journal of Concrete Structures and Materials
• /
• 제7권2호
• /
• pp.155-163
• /
• 2013

The use of sustainable technologies such as supplementary cementitious materials (SCMs), and/or recycled materials is expected to positively affect the performance of concrete mixtures. However, it is imperative to qualify and implement such mixtures in practice, if the required specifications of their intended application are met. This paper presents the results of a laboratory investigation of self-consolidating concrete (SCC) containing sustainable technologies. Twelve mixes were prepared with different combinations of fly ash, slag, and recycled asphalt pavement (RAP). Fresh and hardened concrete properties were measured, as expected the inclusion of the sustainable technologies affected both fresh and hardened concrete properties. Analysis of the experimental data indicated that inclusion of RAP not only reduces the ultimate strength, but it also affected the compressive strength development rate. The addition of RAP to mixes showed a consistent effect, with a drop in strength after 3, 14, and 28 days as the RAP content increased from 0 to 50 %. However, most of the mixes satisfied SCC fresh properties requirements, including mixes with up to 50 % RAP. Moreover, several mixes satisfied compressive strength requirement for pavements and bridges, those mixes included relatively high percentages of SCMs and RAP.

• 한국도로학회논문집
• /
• 제4권4호
• /
• pp.1-12
• /
• 2002

포장유지관리체계는 신설포장의 공용 이후 포장 유지보수를 실시함에 있어 기술적으로 타당하고 경제적으로 효율적인 보수전락을 적용하는 것을 목표로 한다. 이를 위해서는 신뢰성 있는 포장공용성 예측모델을 필요로 한다. 본 연구에서는 마르코프 체인 이론에 기초한 확률적 포장공용성 예측 시스템을 제안하고, 아스팔트 포장으로의 적용상 문제점 등을 기술하였다. 본 연구 결과로서 아스팔트 포장의 공용성 예측을 위한 포장상태 전이행렬을 정의하였으며, 정량적인 포장공용 수명평가 결과를 제시하였다.

• 한국도로학회논문집
• /
• 제9권2호
• /
• pp.51-62
• /
• 2007

최근 국내에서는 교면포장의 파손에 따른 교량 바닥판의 열화 및 운전자 안정성의 문제가 대두되고 있다. 기존 아스팔트 재료는 교량에서 발생하는 열악한 환경에 적용하기에는 한계가 있어 교량 바닥판을 보호하고 상대적으로 큰 처짐에 대하여 장기간 견딜 수 있는, 피로저항성이 우수한 고내구성 교면포장 아스팔트 혼합물의 개발이 필요하게 되었다. 이에 SBS 첨가물과 첨가제를 사용하여 생산성 및 작업성이 우수하고 피로균열저항성이 뛰어난 교면포장용 아스팔트 바인더를 개발하였다. 새로운 아스팔트 바인더는 회전점도시험 (RV test), 인화점시험 (Flash point test), 동적전단시험(DSR test), 저온빔시험(BBR test) 등을 통하여 PG 70-34의 공용등급으로 확인되었다. 본 연구에서 개발된 아스팔트 바인더를 사용한 혼합물의 공용성을 평가하기 위하여, 피로시험, 휠트래킹시험, 수분손상시험 등을 실시하였으며 실물크기의 윤하중시험을 통하여 소성변형 저항성 및 피로균열 저항성에 대하여 평가하였다. 실내공용성 시험을 통하여 교면포장용 아스팔트 혼합물이 SBS 개질 혼합물에 비하여 3배 이상의 피로수명을 가졌다. 또한, 윤하중시험에서도 소성흐름이 발생하지 않았고, 피로균열은 250,000회 이상을 재하하여도 PG 64-22 혼합물의 38% 밖에 나타나지 않았다.

• 대한토목학회논문집
• /
• 제35권1호
• /
• pp.229-236
• /
• 2015

본 연구는 에폭시 아스팔트 포장 내부 상태 평가를 위해 이동 차량하중 모사가 가능한 회복탄성계수 실험과 LWD 실험을 수행하였다. 회복탄성계수 실험에서 측정된 변위는 일반 아스팔트와 달리 잔류변형이 매우 미소한 수준으로 탄성변형과 유사한 거동을 보여 정상 상태로 해석해도 무리가 없는 것으로 나타났다. 회복탄성계수에서 측정된 변위 결과를 처짐 탄성계수로 변환 후 1 SIGMA 단계를 적용하여 정상 처짐 탄성계수 범위를 산정하였다. $60^{\circ}C$에서의 파손 의심 처짐 범위와 하중-변위 선도 개형으로 포장 내부 상태를 예측하였다. 정상 표면처짐 구간인 $140{\mu}m$의 일부 구간에서 수분 침투 및 접착성능 저하가 관찰되었으나, 하중-변위 선도 개형에서 변곡점 발생 구간으로 확인되었다. 현장 확인 결과 제시된 기준은 높은 수준의 정확도를 보이는 것으로 나타났다.