• 한국도로학회논문집
• /
• 제20권1호
• /
• pp.27-33
• /
• 2018

PURPOSES : The purpose of this study is to estimate the optimum content of an inorganic additive for cold-recycled asphalt mixtures and evaluate its performance. METHODS : An indirect tensile test, a tensile-strength ratio test, and an indirect tensile-fatigue test were conducted on cold-recycling asphalt mixtures with various additives. RESULTS : The laboratory performance tests indicated that granulated blast-furnace slag mixed with inorganic and cement activators provided optimum performance. The performance results of the cold-recycled asphalt pavement were similar to the inorganic and cement activators' performance in terms of the indirect tensile strength, tensile strength ratio, and indirect tensile-fatigue test. CONCLUSIONS : Overall, the performance of a cold-recycled asphalt mixture using inorganic additives and emulsion asphalt was comparable to a warm-recycled asphalt mixture. However, more experiments aimed at improving its performance and studying the effect of the inorganic additives must be conducted.

• 한국도로학회논문집
• /
• 제3권3호
• /
• pp.119-133
• /
• 2001

켐크리트 개질 아스팔트 혼합물은 산소와 고온의 온도조건에서 급속하게 경화된다. 켐크리트 개질 혼합물을 아스팔트 포장의 표층에 적용할 경우 이러한 과다한 경화로 인하여 조기 균열이 발생되기도 한다. 이러한 조기 균열의 발생을 완화하기 위하여 켐크리트 개질 혼합물을 아스팔트 포장의 기층에 적용하고 있다. 본 연구에서는 켐크리트 개질 아스팔트와 혼합물의 공용성을 규명하기 위하여 아스팔트 바인더에 대해 동적유동시험 및 처짐보유동시험 등을 실시하였고 혼합물에 대한 일축인장 피로 및 휠트래킹, 수분손상 시험 등을 실시하였다. 또한 현장에서 채취한 시편에 대해 회복탄성계수시험을 실시하여 일반 및 켐크리트 개질 혼합물의 강성을 비교분석하였다. 이상의 시험결과로부터 켐크리트 개질 혼합물은 일반 혼합물에 비해 소성변형에 대한 저항성이 크다는 것을 알 수 있었다. 그러나 켐크리트 혼합물이 추운지방에 사용될 경우 저온균열의 문제가 발생할 가능성이 있을 것으로 사료된다. 켐크리트 혼합물을 기층에 적용하여 2년 이상 경과한 경우 켐크리트 개질 혼합물은 일반 혼합물에 비해 강성이 약 50% 정도 증가됨을 알 수 있었다.

• 한국도로학회논문집
• /
• 제12권4호
• /
• pp.87-92
• /
• 2010

본 연구에서는 산업부산물인 폐 EPDM을 50mesh 이하로 제조한 미세분말 형태의 R-EPDM(Recycling EPDM)을 주성분으로 아스팔트와 안정성을 높이기 위한 첨가제인 분산제와 유화제 및 폴리머 계통의 유동성 향상제를 혼합한 R-EPDM 개질아스팔트 혼합물의 실내 물성 평가를 수행하였다. R-EPDM 개질아스팔트 바인더의 특성을 파악하기 위해 슈퍼패이브 시험법을 이용하여 바인더의 PG(Performance Grade)등급을 분류하였으며, 선회다짐기를 사용한 R-EPDM 개질아스팔트 혼합물의 배합설계를 통하여 최적아스팔트(OAC) 함량을 결정하였다. OAC로 제작된 R-EPDM 개질아스팔트 혼합물의 소성변형 및 동결융해 저항성을 평가하기 위하여 반복주행시험과 수분민감성시험을 수행하였으며, R-EPDM 개질아스팔트 혼합물의 소성변형 및 수분민감성에 대한 저항성이 일반아스팔트(AP-5) 혼합물보다 우수함을 알 수 있었다.

• 한국도로학회논문집
• /
• 제18권2호
• /
• pp.61-71
• /
• 2016

PURPOSES: The objective of this study was to determine the optimum ratio of mix design, for a reclaimed asphalt pavement (RAP) content of 100%, for spray injection application. METHODS: A literature review revealed that spray injection is an efficient and cost-effective application for fixing small defective regions of an asphalt pavement. Rapid-setting polymer-modified asphalt mixtures prepared from two types of rapid-setting polymer asphalt emulsion were subjected to Marshall stability and wet track abrasion tests, in order to identify the optimum mix designs. RESULTS and CONCLUSIONS : Different mix designs of type A and type B emulsions were prepared using RAP and virgin aggregates, in order to compare the performance and determine the optimum mix design. The performance of mixtures prepared with RAP was superior to that of mixtures containing virgin aggregates. Moreover, for optimum ratio of the design, the binder content prepared from RAP was set to 1~2% lower than that consisting of virgin aggregates. Compared to their Type A counterparts, type B mixtures consisting of a reactive emulsion performed better in the Marshall stability and wet track abrasion tests. The initial results confirmed the advantages associated with using RAP for spray injection applications. Further studies will be performed to verify the difference in the optimum mix design and performance obtained in the lab-scale test and tests conducted at the job site by using the spray injection machine.

• 한국도로학회논문집
• /
• 제15권4호
• /
• pp.43-51
• /
• 2013

PURPOSES : The main purposes of this study are to examine the influences of polyethylene wax-based WMA additive on the optimum asphalt content of warm-recycled asphalt mixture based on the Marshall mix design and to evaluate performance of warm-recycled asphalt mixture containing 30% RAP with polyethylene wax-based WMA additive. METHODS: Physical and rheological properties of the residual asphalt were evaluated in terms of penetration, softening point, ductility and performance grade (PG) in order to examine the effects of polyethylene wax-based WMA additive on the residual asphalt. Also, To evaluate performance characteristics of the warm-recycled asphalt mixtures using polyethylene wax-based WMA additive along with a control hot-recycled asphalt mixture, indirect tensile strength test, modified Lottman test, dynamic immersion test, wheel tracking test and dynamic modulus test were conduced in the laboratory. RESULTS : Based on the limited laboratory test results, polyethylene wax-based WMA additive is effective to decrease mixing and compacting temperatures without compromising the volumetric characteristics of warm-recycled asphalt mixtures compared to hot-recycled asphalt mixture. Also, it doesn't affect the optimum asphalt content on recycled-asphalt mixture. All performance test results show that the performance of warm-recycled asphalt mixture using polyethylene wax-based WMA additive is similar to that of a control hot-recycled asphalt mixture. CONCLUSIONS: Overall, the performance of warm-recycled asphalt mixture using polyethylene wax-based WMA additive is comparable to hot-recycled asphalt mixture.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2008년도 정기총회 및 학술발표대회
• /
• pp.305-308
• /
• 2008

This paper describes a research study on the durability and strength properties of thin quiet-permeable asphalt concrete. Such asphalt mixes have high porosity, which offers significantly better drainages than normal mix designs. However, these materials also exhibit poor durability and strength limiting their use in pavement application. To remedy this, fiber and polymer modifiers have been proposed. All samples were added to modified binder which were prepared with or without the modifiers and fiber using Marshall mix procedures and were experimentally tested using various standardized testing procedures including percent air void for porosity, cantabro test and marshall stability. In general, the results of marshall stability showed that modified mixtures were equivalent to unmodified mixtures. Especially, the result of cantabro tested modified mixtures was superior to unmodified mixtures.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2000년도 학술발표회 발표논문집
• /
• pp.259-265
• /
• 2000

This study is a fundamental research for recycling waste vinyl in asphalt concrete mixture for roadway pavement. The mixing method and proper content of waste polyethylene(PE) film were determined through preliminary mix design. This study was performed mix designs using 2 type graduations of aggregate and used two types waste PE film. The asphalt concrete mixture was satisfied with the specification of the Ministry of Construction and Transportation. Its showed that dense grade asphalt concrete mixture containing waste vinyl were higher performance in comparision to other mixtures(common dense grade mixture and gap grade mixtures). From results of this study, it was confirmed that addition of waste vinyl improved on quality of asphalt concrete mixture.

• 한국도로학회논문집
• /
• 제13권4호
• /
• pp.61-70
• /
• 2011

본 연구에서는 아스팔트 콘크리트의 전단 물성을 고려한 영구변형 예측 모델을 개발하였다. 아스팔트 콘크리트의 전단 물성과 영구변형과의 상관성을 고찰하기 위해서 세 가지 종류의 아스팔트 콘크리트에 대해서 반복재하삼축압축(RLTC) 시험 및 삼축압축강도 시험과 간접인장강도 시험을 다양한 하중과 온도 조건에서 시행하였다. 주어진 아스팔트 콘크리트에 대하여 온도가 증가함에 따라 점착력은 감소하였으나 온도가 $40^{\circ}C$ 이상인 경우 마찰각은 온도 변화에 민감하지 않은 거동을 나타내었다. 축차응력, 구속압, 온도 및 하중 주파수가 영구변형에 미치는 영향이 크다는 것을 관측할 수 있었다. 이러한 실내 시험 결과로 부터 아스팔트 콘크리트의 전단물성과 하중재하시간에 기초한 영구변형 모델을 개발하였다. 또한 일반적인 포장 단면에서 실시한 포장가속시험 결과를 이용해서 영구변형 모델을 보정하였다. 본 연구에서 제안한 영구변형 모델을 이용하여 다양한 온도와 하중조건에서 아스팔트 콘크리트의 영구변형을 예측할 수 있었다.

• 한국도로학회논문집
• /
• 제19권2호
• /
• pp.75-85
• /
• 2017

PURPOSES : The purpose of this study was to determine the optimum mix design of the content of 100 % reclaimed asphalt pavement (RAP) for spray injection application with different binder types. METHODS : Literature review revealed that spray injection method is the one of the efficient and economical methods for repairing a small defective area on an asphalt pavement. The Rapid-Setting Polymer modified asphalt mixtures using two types of rapid setting polymers-asphalt emulsion and a quick setting polymer asphalt emulsion-were subjected to the following tests to determine optimum mix designs and for performance comparison: 1) Marshall stability test, 2) Retained stability test, 3) Wet track abrasion test, and 4) Dynamic stability test. RESULTS and CONCLUSIONS : Type A, B, and C emulsions were tested with different mix designs using RAP aggregates, to compare the performances and determine the optimum mix design. Performance of mixtures with Type A emulsion exceeded that of mixtures with Type B and C emulsion in all aspects. In particular, Type A binder demonstrated the highest performance for WTAT at low temperature. It demonstrated the practicality of using Type A mixture during the cold season. Furthers studies are to be performed to verify the optimum mix design for machine application. Differences in optimum mix designs for machine application and lab application will be corrected through field tests.

• 한국도로학회논문집
• /
• 제20권1호
• /
• pp.59-67
• /
• 2018

PURPOSES : This paper presents a mix design method for using steel slag as an aggregate for asphalt mixtures. METHODS : Steel slag has a different density and absorption rate than natural aggregates. The asphalt content was calculated according to the steel slag characteristics, and the formula for aggregate-gradation correction was presented. RESULTS : The asphalt mix was designed using the proposed equations. Using the proposed mix design method, it was possible to design the asphalt mixture according to the target-usage amount of the recycled aggregate. CONCLUSIONS : The suggested method can be used for asphalt mix design using aggregates with different densities and absorption rates. It is expected to contribute to quality improvement by ensuring accurate calculation of mixing ratios for steel slag asphalt mixtures.