• Fisheries and Aquatic Sciences
• /
• v.13 no.2
• /
• pp.167-181
• /
• 2010

To predict changes in the marine environment of the Beolgyo Stream Estuary in Jeonnam Province, South Korea, where cohesive tidal flats cover a broad area and a large bridge is under construction, this study conducted numerical simulations involving tidal flow and cohesive sediment transport. A wetting and drying (WAD) technique for tidal flats from the Princeton Ocean Model (POM) was applied to a large-scale-grid hydrodynamic module capable of evaluating the flow resistance of structures. Derivation of the eddy viscosity coefficient for wakes created by structures was accomplished through the explicit use of shear velocity and Chezy's average velocity. Furthermore, various field observations, including of tide, tidal flow, suspended sediment concentrations, bottom sediments, and water depth, were performed to verify the model and obtain input data for it. In particular, geologic parameters related to the evaluation of settling velocity and critical shear stresses for erosion and deposition were observed, and numerical tests for the representation of suspended sediment concentrations were performed to determine proper values for the empirical coefficients in the sediment transport module. According to the simulation results, the velocity variation was particularly prominent around the piers in the tidal channel. Erosion occurred mainly along the tidal channels near the piers, where bridge structures reduced the flow cross section, creating strong flow. In contrast, in the rear area of the structure, where the flow was relatively weak due to the formation of eddies, deposition and moderated erosion were predicted. In estuaries and coastal waters, changes in the flow environment caused by artificial structures can produce changes in the sedimentary environment, which in turn can affect the local marine ecosystem. The numerical model proposed in this study will enable systematic prediction of changes to flow and sedimentary environments caused by the construction of artificial structures.

• Journal of Biomedical Engineering Research
• /
• v.43 no.3
• /
• pp.136-146
• /
• 2022

In this study, it is intended to provide basic data that can help develop a cardiovascular simulator for performance evaluation of pulse wave detectors by identifying the development status of domestic and overseas cardiovascular simulators. A total of 119 papers were selected by excluding duplicate literature, gray literature, and literature not related to a cardiovascular simulator. Based on the selected literature, the research trend of cardiovascular simulators was analyzed. As a result of analyzing the purpose of the study, most of the simulators were developed to evaluate the hemodynamic properties of artificial hearts and valves. In addition, it was used for simulation evaluation or hemodynamic studies such as pulse wave studies. As a result of analyzing configurations of the simulators, a heart most often consisted of only one left ventricle. For blood vessels, the Windkessel model was most often constructed using chambers and valves. In most studies, blood was reproduced by mixing glycerin and water to reproduce both density and viscosity. In addition, as a result of analysis from the perspective of medical device performance evaluation, simulators for evaluating artificial heart and artificial valves have been studied a lot, whereas simulators for blood pressure, pulse wave, and blood flow devices have been relatively insignificant. Based on the review results, we suggested considerations when developing a simulator for performance evaluations of a pulse wave detector.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.46 no.6
• /
• pp.56-62
• /
• 2014

This study aims to investigate the applicability of supercritical fluid extraction as a dewaxing technique to restore the beeswax-treated volume of the Annals of the Joseon Dynasty in various deterioration and damage conditions. Thus, this study analyzed the dewaxing efficiency and changes in physical and morphological properties before and after dewaxing, by applying the optimal supercritical fluid extraction dewaxing condition ($70^{\circ}C$, 40 MPa, $CO_2$, Co-solvent 20% DCM, 2 hour) to 3 kinds of beeswax-treated paper with different deterioration rates (dry artificial aging of 10, 20 and 30 days at $120^{\circ}C$). After dry artificial aging at $120^{\circ}C$ for 30 days, the average molecular weight of the beeswax-treated specimen was $1.856{\times}10^5g/mol$, showing deterioration about 80% of the beeswax-treated paper before dewaxing. It was a similar level to the molecular weight of the bees-waxed volume of the Annals of the Joseon Dynasty that has a higher degree of damage. As a result of analyzing the dewaxing efficiency through FT-IR analysis, this study discovered that it was possible to effectively dewax beeswax-treated paper in the range of deterioration 20 to 80% with this supercritical fluid extraction dewaxing technique applied. As a result of analyzing changes in the physical and morphological properties before and after dewaxing, the viscosity tended to decrease to a slight degree, and since no morphological deformation or damage of stencil fibers was found, it was concluded possible to conduct stable dewaxing through this supercritical fluid extraction technique.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.1
• /
• pp.72-78
• /
• 2008

In this study, advanced (fluid-structure interaction (FSI)) analysis system has been developed in order to predict turbine cascade performance with blade deformation effect due to aerodynamic loads. Intereference effects due to the relative movement of the rotor cascade with respect to the stator cascade are also considered. Reynolds-averaged Navier-Stokes equations with one equation Spalart-Allmaras and two-equation k-ω SST turbulence models are solved to accurately predict fluid dynamic loads considering flow separation effects. A fully implicit time marching scheme based on the (coupled Newmark time-integration method) with high artificial damping is efficiently used to compute the complex fluid-structure interaction problem. Predicted aerodynamic performance considering structural deformation effect of the blade shows somewhat different results compared to the case of rigid blade model. Cascade performance evaluations for different elastic axis positions are importantly presented and its aeroelastic effects are investigated.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.8
• /
• pp.1007-1012
• /
• 2010

The aim of the present study was to describe whether abnormal cervical mucus discharge (A-CMD) or pathogens in cervical mucus discharge (CMD) have effects on reproductive performance of cows and heifers in estrus. Animals having clear discharges (68 cows, 38 heifers) with normal viscosity and without bad odor were grouped as normal cervical mucous discharge (N-CMD) group. The other animals (84 cows, 32 heifers) were grouped as A-CMD group. Microorganisms isolated from samples were divided into three groups as uterine pathogens (UP), potential uterine pathogens (PUP) or opportunistic uterine pathogens (OUP). Presence of PUP was associated with A-CMD for both cows (p<0.01) and heifers (p<0.02). First service conception rates (FS-CR) were lower in cows positive for PUP (p<0.01). Moreover, presence of PUP and OUP affected FS-CR in heifers (p<0.01). Although A-CMD significantly affected FS-CR in cows (p<0.04), it did not affect FS-CR in heifers. Differences in average open day for cows (p<0.02) and first service age for heifers (p<0.01) were significant between N-CMD and A-CMD groups, respectively. The current study suggested that CMD should be evaluated more carefully when there are infertility problems. In addition to the known microorganism that causes sterility and infertility in the UP group, pathogens in the PUP group should be considered for their potential to cause infertility.

• Journal of Ginseng Research
• /
• v.42 no.4
• /
• pp.512-523
• /
• 2018

Background: 20(S)-Protopanaxadiol (20S-PPD) is a fully deglycosylated ginsenoside metabolite and has potent dermal antiaging activity. However, because of its low aqueous solubility and large molecular size, a suitable formulation strategy is required to improve its solubility and skin permeability, thereby enhancing its skin deposition. Thus, we optimized microemulsion (ME)-based hydrogel (MEH) formulations for the topical delivery of 20S-PPD. Methods: MEs and MEHs were formulated and evaluated for their particle size distribution, morphology, drug loading capacity, and stability. Then, the deposition profiles of the selected 20S-PPD-loaded MEH formulation were studied using a hairless mouse skin model and Strat-M membrane as an artificial skin model. Results: A Carbopol-based MEH system of 20S-PPD was successfully prepared with a mean droplet size of 110 nm and narrow size distribution. The formulation was stable for 56 d, and its viscosity was high enough for its topical application. It significantly enhanced the in vitro and in vivo skin deposition of 20S-PPD with no influence on its systemic absorption in hairless mice. Notably, it was found that the Strat-M membrane provided skin deposition data well correlated to those obtained from the in vitro and in vivo mouse skin studies on 20S-PPD (correlation coefficient $r^2=0.929-0.947$). Conclusion: The MEH formulation developed in this study could serve as an effective topical delivery system for poorly soluble ginsenosides and their deglycosylated metabolites, including 20S-PPD.

• Korean Journal of Microbiology
• /
• v.50 no.4
• /
• pp.334-344
• /
• 2014

The objective of this study was to evaluate the microbiological and physicochemical characteristics, and the antagonistic activity against Helicobacter pylori ATCC 43504, of yogurt fermented with the lactic acid bacteria from Baikkimchi kept under cold storage. The viable cell counts, titratable acidity, viscosity, and total solid content of the yogurt were different according to the bacterial strains used for fermentation. There was no significant change (P>0.05) in the various properties of refrigerated yogurt. Among the tested strains, the strongest resistance against artificial gastric juice and bile salt was found for Lactobacillus brevis BK11 and Lactobacillus paracasei BK57. Due to high lactic acid levels obtained from these two lactic acid bacteria, yogurt may show good anti-Helicobacter effects according to the time-kill assay. In particular, yogurt fermented with L. brevis BK11 significantly reduced the number of H. pylori adhering to gastric epithelial AGS cells and the urease activity of this pathogen (P<0.05).

• Membrane Journal
• /
• v.33 no.1
• /
• pp.34-45
• /
• 2023

Two computational intelligence techniques namely artificial neural networks (ANN) and support vector machine (SVM) are employed to model the permeate flux based on seven input variables including time, transmembrane pressure, rotating velocity, the pore diameter of the membrane, dynamic viscosity, concentration and density of the feed fluid. The best-fit model was selected through the trial-error method and the two statistical parameters including the coefficient of determination (R²) and the average absolute relative deviation (AARD) between the experimental and predicted data. The obtained results reveal that the optimized ANN model can predict the permeate flux with R² = 0.999 and AARD% = 2.245 versus the SVM model with R² = 0.996 and AARD% = 4.09. Thus, the ANN model is found to predict the permeate flux with high accuracy in comparison to the SVM approach.

• Microbiology and Biotechnology Letters
• /
• v.34 no.3
• /
• pp.196-203
• /
• 2006

Three slime-forming lactic acid bacteria were isolated from Kimchi and shown to produce viscous exopolysaccharides (EPS) in sucrose media. The isolated strains, GJ2, C3 and C11, were identified as Leuconostoc kimchii, Leuconostoc citreum and Leuconostoc mesenteroides, respectively, by examining their metabolic characteristics and determining their 16S rDNA sequences. Leu. kimchii GJ2, Leu. citreum C3 and Leu. mesenteroides C11 exhibited high viability (maintained initial viable cell count of $10^8$ CFU/ml) in 0.05 M sodium phosphate buffer (pH 3.0) for 2 h, in artificial gastric juice for 2 h and in 0.3% oxgall for 24 h. When tested, Leu. kimchii GJ2, in particular, displayed antimicrobial activity against pathogenic microorganisms. Leu. kimchii GJ2, Leu. citreum C3 and Leu. mesenteroides C11 produced 21.49 g/l, 16.46 g/l and 22.98 g/l EPS, respectively, in sucrose (5%) medium. The amount of purified EPS extracted from Leu. kimchii GJ2, Leu. citreum C3 and Leu. mesenteroides C11 was 14.61 g/l, 7.73 g/l and 4.77 g/l, respectively. Although the EPS produced by Leu. kimchii GJ2, Leu. citreum C3 and Leu. mesenteroides C11 differed in viscosity, TLC and HPLC analysis revealed that each contained only one type of monosaccharide, glucose. The average molecular mass of EPS produced by Leu. kimchii GJ2 was 306,606 Da.

• Journal of Veterinary Clinics
• /
• v.23 no.2
• /
• pp.123-128
• /
• 2006

Production of cloned pigs by somatic cell nuclear transfer (SCNT) has unlimited value for developing critical biotechnology such as xenotransplantation. Various efforts have been made to establish this technology, and several litters of live piglets have been produced after transfer of SCNT embryos. However, the efficiency is very low compared to piglet production by artificial insemination or natural mating. So far, most studies have been limited to in vitro production of SCNT embryos. This study was conducted to standardize a surrogate recipient (gilts) for transfer of SCNT embryos to improve pregnancy rate. Potential surrogate gilts over 7 months of age were checked for their estrous status by observing external signs; vaginal fluid, vulva redness, vulva swelling, and standing response to back pressure. Viscosity of vaginal fluid was evaluated and classified as none (0), medium (1), and strong (2). Vulva redness and swelling was respectively assessed by none or shrink (0), medium (1), strong (2). Back pressure was estimated by an immediate move (0), standing less than 10 sec (1), and standing over 10 see (2). And then ovulation status of each surrogate was classified as pre-ovulation (PO-17 surrogates), just prior to ovulation (JPO-20 surrogates), in ovulation (IO-12 surrogates), just after ovulation (JAO-14 surrogates) and after ovulation (AO-24 surrogates) at the time of surgery for embryo transfer (ET). Real-time ultrasonographic scanners have been used for pregnancy diagnosis by observing amniotic vesicles. The first pregnancy diagnosis was done on Day 30 after ET and then repeated 2-week interval. In the results, SCNT embryos transferred into JPO surrogates gave better pregnancy rates (45%) than others (4% to 11%) on Day 30 after ET. These result indicates that surrogate gilts in a status just prior to ovulation can offer optimal condition to establish pregnancy by transfer of SCNT pig embryos.