• 한국전통조경학회지
• /
• 제29권1호
• /
• pp.105-120
• /
• 2011

해자란 성벽 외곽에 파 놓은 못 또는 물길로 적이 성벽에 직접 접근할 수 없도록 하거나 이를 경계로 공간을 구분하고자 설치된 시설의 하나로, 고대로부터 중세에 이르기까지 동 서양에서 존재하였으나 현재는 사라져 가고 있다. 그러나 군사적 방어 기능으로부터 공간을 구분하는 경계 수단으로, 지반을 다지는 중요한 역할을 하였으며, 역사적으로 고대로부터 중세, 유럽, 아시아, 미국 등에서 존재하였다. 또한 해자는 물을 이용한 다양한 문화 활동과 동물들의 서식처 장소를 제공하는 등 역사와 문화적 가치가 큰 공간임에도 불구하고, 복원 계획에 있어 해자의 복원에 대한 고려가 미비한 실정이다. 본 연구는 동 서양 해자의 역사와 문화적 의미를 해석하여 고대로부터 중세에 이르기까지 존재했던 해자 문화에 대한 이해를 높이고자 하는 연구로 해자의 기원, 시대적 고찰, 사상적 배경, 서양 해자의 역사와 문화, 동양의 한국, 중국, 일본 해자에 대하여 분석한 결과는 다음과 같다. 1. 우리나라의 해자는 고구려 도성뿐만 아니라 신라, 백제의 도성에 모두 존재하였으며, 천연의 해자인 넓은 강을 끼고 적들이 기어오르기 힘든 산 능선을 따라 성을 쌓은 자연적 해자와 성벽 밖에 인공적 해자를 설치하여 적의 접근을 방지하였다. 또한 고려시대와 조선시대에도 해자를 방어적 기능으로 활용하였다. 2. 해자의 설치는 성벽에서 일정한 간격을 두고 넓고 깊게 파는 것이 보통이며, 성의 외곽에만 있는 것이 아니라 내부에도 시설이 설치되었는데, 성 밖에 있는 해자는 방어력을 높이는 것 외에도 지반을 다지는데 중요한 역할을 하였다. 또한 해자는 물이 있어 접근을 제한하며, 낮은 벽이나 담장은 경계를 물리적으로 분리시키지만 해자는 열린 공간으로 시각적 특성을 살려 경계 및 방어 수단을 가지면서 멀리 떨어진 산봉우리나 근처의 나무도 정원 안으로 차경할 수 있게 한다. 3. 낙안읍성은 풍수지리적으로 청룡(동천)의 기가 드센 관계로 청룡의 흐름을 "S"자로 꺾어 흐르게 함으로써 기를 꺾을 수 있었으며, 몽촌토성은 해자의 복원으로 공원에 풍부한 수경 요소를 제공하는 경관요소로 활용하였다. 성을 둘러싸고 있는 해자는 자연이라는 진경 속에 선조들의 삶과 문화가 공간 속에 설득력 있게 배어든 역사와 문화적 경관이 표상이다. 4. 중국의 자금성 성벽은 찹쌀에 흙을 반죽하여 다져 넣어 매우 견고하며, 해자의 폭은 52m, 깊이는 6m로 자금성 성벽을 에워싸고 있어 적의 접근을 차단할 수 있었다. 5. 일본의 해자는 도시에 있어 수로 역할을 하였으며, 보트놀이, 배낚시, 레스토랑 등의 레저시설이 설치되어 도시민들의 스트레스를 해소하고 삶의 활력을 불어 넣을 수 있었다. 6. 한국의 해자는 중국의 자금성, 일본의 에도성, 오사카성보다 규모가 작으며 동양의 해자는 왕궁이나 읍성을 보호하기 위해 해자를 설치하였으나, 서양에서는 왕이나 영주, 대저택, 부호들의 저택 등을 보호하기 위해 해자를 설치하였다.

• 터널과지하공간
• /
• 제33권4호
• /
• pp.281-298
• /
• 2023

달 현지 탐사를 위해 무인 이동체에 대한 연구가 지속적으로 이루어져 있으며 달 지상 관심 지역의 정확한 위치 및 맵핑을 위한 실시간 정보화 작업이 요구되고 있다. 딥러닝 영상 처리 분석 기술을 실제 로버에 적용하기 위해 소프트웨어의 통합과 최적화에 대한 연구가 필요하며 본 연구에서는 가상의 달 기지 건설현장의 영상을 실시간 분석하여 핵심 객체의 공간 정보를 자동으로 수치화하는 방안에 대한 기초 연구가 진행되었다. 본 연구를 통해 이미 구축된 영역 분할 기반 객체 인식 알고리즘을 경계 상자 기반 객체 인식알고리즘으로 변경하여 객체 인식 정확도 및 추론 속도를 개선하는 작업이 이루어졌으며, 대용량 데이터 기반 객체 매칭 학습을 위해 Batch Hard Triplet Mining 기법을 도입하고, 학습 및 추론에 대한 최적화 연구가 수행되었다. 또한 개선된 객체 인식 및 동일 객체 매칭 소프트웨어를 통합하고, 입력 이미지 내 동일 객체 자동 매칭을 시각화하는 소프트웨어를 개발하였으며, 위성 모사 촬영 영상 내 객체를 학습 데이터로, 이동체 촬영 영상 내 객체를 추론 데이터로 사용하여 동일 객체 매칭의 학습 및 추론이 이루어졌다. 본 연구의 결과는 이동체의 연속 촬영 영상을 기반 3차원 공간 정보를 구현 및 관심 공간 내 객체 위치 설정에 활용할 수 있을 것으로 사료되며, 향후 달 기지 건설 현장에서의 영상 기반 시공 모니터링 및 제어를 위한 자동 현장 및 주요 대상물 공간 정보 구축 시스템과의 연계에 기여할 것으로 기대된다.

• 헤리티지:역사와 과학
• /
• 제56권2호
• /
• pp.172-203
• /
• 2023

<청담도(淸潭圖)>는 겸재 정선(謙齋 鄭敾, 1676~1759)이 영조 32년(1756)에 삼각산(三角山) 청담(淸潭) 지역을 유람하고 그린 병풍도(屛風圖) 형식의 진경산수화(眞境山水畫)로 본 연구를 통해 발굴되었다. 와운루(卧雲樓)와 농월루(弄月樓)로 구성된 청담별업(淸潭別業)은 노론 낙론계(洛論系) 문회와 백악시단(白嶽詩壇)의 시회가 열린 당대 문화예술 활동의 거점이며, 정선과 그림의 주문자 홍상한(洪象漢, 1701~1769)의 연결점이 된다. <청담도>는 1756년 가을비가 내릴 당시, 정선이 그의 제자 김희성(金喜誠, 1723~1769)과 청담에 막 도착하여 홍상한과 만났을 때를 회상하면서 그린 그림이다. 인수봉(仁壽峰)부터 동구(洞口)까지 굽이쳐 흐르는 골짜기를 주안에 두고 그려졌으며, 청담 지역의 전경을 담으면서도 동(洞)의 유래가 되는 경물(景物) 청담(淸潭)을 강조하는 중의적인 화제를 사용하였다. 과감한 쇄찰(刷擦)과 습윤한 피마준(披麻皴), 부드러운 미점(米點)의 표현, 세밀한 필선 등은 정선 노년의 절정에 이른 원숙함을 보여준다. 특히, 암산(巖山)과 토산(土山)의 대비와 개수의 대칭을 고려하여 음양(陰陽)의 조화를 꾀한 점은 『주역(周易)』에 능통했던 정선이 유람의 최종단계에서 보였던 특유의 진경술(眞境術)로 보았다. 어유봉의 「청담동부기(淸潭洞府記)」는 정선이 청담의 진경을 파악하고 별업정원에 설정된 주요 경물의 물성(物性)을 이해하는 것에 영향을 주었다. 정선이 현장과 차별되도록 그린 별업정원의 특징으로는 수구막이 바위를 변용하고 과장하여 수구를 억눌렀고, 비보림(裨補林)을 치밀하게 조성하여 별업을 가렸으며, 특정 경물의 기능이 발휘되도록 새로운 물체를 창안하였다. 또한, 두 그루 나무를 기울여 대문처럼 정원을 닫고 있으며, 외원과 내원의 경계가 되는 인공의 조산대(造山帶)를 긴 담장처럼 견고하게 조성하여 내청룡과 내백호를 연결하였다. 이는 정선이 청담별업의 부족한 입지를 명당으로 만들기 위해 구사한 비보염승술(裨補厭勝術)로, 풍수적인 묘책으로 고안된 진경술의 일단으로 해석되며, 현실에서는 이루기 어렵지만 그림으로는 가능했던 이상적인 전통조경의 도상학적 구현을 잘 보여준다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.

• 한국산림과학회지
• /
• 제78권3호
• /
• pp.287-301
• /
• 1989

가죽나무(Ailanthus altissima Swingle) 수간(樹幹)의 지상고(地上高) 180cm 부위(部位)에 19mm 너비의 플라스틱 밴드를 결체(結締)하여 1년간(年間) 방치(放置)한 후 이 밴드를 解締)하여 주므로써 수간(樹幹)을 둘러싸는 원반형태(圓盤形態)의 과대(過太)한 비대생장(肥大生長) 조직(組織)인 종양상조직(腫瘍狀組織)(tumorous tissue)이 형성(形成)되고 이러한 종양상조직(腫瘍狀組織)의 원반(圓盤)과 상하(上下)에 위치(位置)한 정상형태(正常形態)의 원반원반(圓盤)을 채취(採取)하여 해부학적(解剖學的) 차이(差異)를 구성세포(構成細胞)의 특성(特性)면에서 조사(調査), 비교(比較)하였다. 종양상(腫瘍狀) 부위(部位)에서는 상이적(異常的)으로 넓은 연륜폭(年輪幅)을 지니는 종양재(腫瘍材)(tumor wood)가 밴드 해체(解締)다음 해인 제(第)3연륜(年輪)에서 형성(形成)되었으며 밴드 결체기간(結締其間)중에 생장(生長)한 제(第)2연륜(年輪)에서는 내부(內部)로 발달(發達)된 변색재(變色材)(discolored wood)와 외부(外部)로 발달(發達)한 정상색(正常色)의 재(材)를 구분하는 방어대(防禦帶)(barrier zone)가 형성(形成)되어 있었으며 이종양상(腫瘍狀) 부위(部位) 의 상하(上下) 위치(位置)한한 정상형태(正常形態)의 부위(部位)에서는 정상재색(正常材色)을 나타내는 제(第)2연륜내(年輪內)에 방어대(防禦帶)에 해당하는 위연륜상대(僞年輪狀帶)(false ring-like zοnes)가 형성(形成)되어 있었다. 종양상(腫瘍狀) 부위(部位)에 있어서 종양재(腫瘍材)인 제(第)3연륜(年輪)과 방어대(防禦帶)후에 발달(發達)한 제(第)2연륜부분(年輪部分)은 불규칙(不規則)한 연륜계(年輪界), 길이가 짧으며 비정상적(非正常的)인 형태(形態)를 나타내는 목섬유(木纖維) 및 도관요소(導管要素), 높이와 폭이 큰 방사조직(放射組織)을 다진다는 면에서 서로 유사(類似)하였다. 그리고 종양재(腫瘍材)인 제(第)3연륜(年輪)의 춘재부(春材部) 관공(管孔)의 직경(直徑)은 상하(上下) 정상부위(正常部位)의 제(第)3연륜(年輪)것보다 작은 것으로 나타났으며 방어대(防禦帶)후에 형성(形成)된 제(第)2연륜(年輪) 부분(部分)의 추재부(秋材部) 고립관공(孤立管孔) 및 복합관공(複合管孔)을 구성하는 개개의 관공(管孔)은 방사직경(放射直徑)이 접선직경(接線直徑)보다 더 큰 특성(特性)을 나타낸 반면 종양재(腫瘍材)에서는 직경(直徑)이 거의 유사한 성향을 나타내었다. 또한 종양상(腫瘍狀) 부위(部位)에 있어서는 방어대(防禦帶)후에 형성(形成)된 제(第)2연류부분(年輪部分)에서만 방사조직밀도(放射組織密度)가 크게 증가한 특성(特性)이 관찰되었다. 종양재(腫瘍材)인 제(第)3연륜(年輪)의 목섬유(木纖維) 직경(直徑)은 상하(上下) 정상부위(正常部位)의 제(第)3연륜(年輪)것과 거의 차이를 나타내지 않으므로 과대한 비대생장조직(肥大生長組織)인 종양재(腫瘍材)는 세포(細胞)의 크기에 의해서가 아니라 세포수(細胞數)의 증가(增加)에 의해 형성(形成) 되었음을 알 수 있었다.

• 한국전통조경학회지
• /
• 제34권3호
• /
• pp.78-97
• /
• 2016

본 연구는 문헌 및 현장조사를 바탕으로 양평군 서종면 벽계천에 형성된 수회구곡과 벽계구곡 그리고 노산팔경의 설정 경위를 검토하고, 화서 당대에 향유되고 경영된 명승 벽계의 경관실체를 구명하는 것을 목적으로 한다. 연구의 결과는 다음과 같다. 첫째, 화서 이항로 이후에 설정된 벽계구곡과 노산팔경은 화서의 행적과 관련된 주요 경처를 모은 '현대기(現代期)'의 집경으로 판명되었다. 벽계구곡이 수회구곡의 집경요소와 많은 부분 중복되는 점이나, 수회구곡의 종점부터 노산팔경의 영역이 시작되는 작위적 구성은 수입리 벽계와 노문리 벽계 사이의 장소대립 및 장소패권의 양상을 엿보게 한다. 이는 화서 이전 벽계 향유집단의 오랜 역사성과 화서의 이미지로 밀착된 영역성이 상충되어 나타난 결과로 판단된다. 둘째, 벽계구곡은 노산팔경의 영역을 확대함과 동시에 수입리의 경승을 선별해 재구성한 2차적 공간체계였다. 벽계구곡의 설정 이후 벽계천 전체 권역에 대한 장소 정체성이 효과적으로 확보되었는데, '청서구장(淸西舊莊)'과 '수회구곡(水回九曲)' 바위글씨 등 화서 이전의 명소가 철저히 배제되는 등 '화서 지향적' 공간 성격을 갖고 있었다. 그 결과 노문리뿐만 아니라 수입리에 이르는 벽계천 전체 영역은 화서의 문화경관으로 재편되었다. 셋째, '주자-율곡-우암-화서'로 이어지는 도통 강화의 일환으로 설정된 화서학파의 구곡 설정은 벽계구곡 탄생의 계기이자 외적 동인이 되었다. 즉, 벽계구곡과 노산팔경은 화서학의 중심이 옥계동으로 건너간 것에 대한 반동, 무이구곡 고산구곡과 옥계구곡의 사이의 결손된 도체공간의 창출 그리고 후손과 지역민에 의한 화서 선양작업 등 일련의 전략적 지향성과 흐름을 같이 한다. 넷째, 화서의 주리론적 관점에서 살펴보면, 그가 경영한 벽원(蘗園)의 모든 경역은 '실제로 존재하는 산수경치의 물상[氣]'을 통해 리(理)의 내재함과 심미적 자아의 허령(虛靈)한 경계를 체험하는 공간작법으로 존재했음을 알 수 있다. 이러한 점은 벽계구곡이나 노산팔경을 화서와 연관된 영역으로 조명하기 이전에, 벽원 고유의 경관성을 규정짓고 나아가 어떤 방식으로 접근하고 향유해야 하는지를 일깨워 준다. 다섯째, 노산팔경은 벽계구곡 중 노문리 벽계 일원 중에서도, 화서가 강학하고 소요하던 여덟 곳의 경승을 담는 곡중경(曲中景)의 문화경관으로 구성되었으나 화서가 남긴 바위글씨와 시문에 의존해 집경됨으로써 벽계구곡에 비해 내적 충일성은 확보되지만 집경에 따른 개념적 타당성에는 다소의 의문이 남는다.

• 대한방사선치료학회지
• /
• 제33권
• /
• pp.145-153
• /
• 2021

목 적: 본 연구에서는 가임기 여성의 유방암 방사선 치료 시 난소 선량에 대해 실험을 통하여 평가해보고자 한다. 치료기법에 따른 치료계획시스템에서 계산된 선량과 열형광선량계를 이용한 측정선량을 비교·분석하여 난소 선량을 평가하고 납(Pb) 앞치마의 사용유무에 따른 선량 분석을 통해 임상에서의 유용성을 알아보고자 한다. 대상 및 방법: 측정에는 Rando humanoid phantom을 이용하였고, 치료기법으로는 쐐기필터치료기법, 3차원 입체조형치료, 세기변조방사선치료를 사용하였다. CT simulator를 이용하여 얻은 Rando humanoid phantom 3D 영상의 우측 유방에 처방선량의 95%가 전달될 수 있도록 치료계획을 세웠고, TLD를 Rando hunmanoid phantom의 가상 표적의 표면 및 심부에 삽입하고 방사선을 조사하였다. 측정위치는 치료 중심점과 Rando humanoid phantom의 정중앙을 중심으로 반대쪽 유방으로 2cm 이동한 지점과 치료 중심축 및 하방으로 우측 유방의 경계면에서 5cm, 10cm, 12.5cm, 15cm, 17.5cm, 20cm, 우측 난소 위치의 표면과 중심점을 포함하여 총 9개 지점에서 측정하였다. 치료계획시스템의 선량 비교에서는 쐐기필터치료기법 2가지와 3차원 입체조형치료, 세기변조방사선치료 등 총 4개의 치료 계획을 수립하여 비교하였다. 그리고 TLD를 이용한 측정값 비교는 세기변조방사선치료와 쐐기필터를 이용한 치료를 비교하였고, 납 앞치마의 사용유무에 따라서 세기변조방사선치료의 선량차이를 측정하여 비교·분석하였다. 측정값은 각 포인트마다 3개의 TLD값 평균을 내고 TLD 교정값을 이용하여 환산하였으며 이를 Point dose mean값으로 계산하였다. 치료계획값과 실제 측정값을 비교하기 위해 각 지점마다 절대선량값을 측정하여 %Diff 값으로 계산하였다. 결 과: 치료 중심점인 Point A에서는 치료계획시스템에서 최대 201.7cGy가 나왔고, 실제 TLD 측정값은 최대 200.6cGy가 나왔다. 모든 치료계획시스템에서 유방 경계면으로부터 하방으로 17.5cm 떨어진 지점인 Point G 부터는 0cGy로 계산이 되었다. 실제 TLD 측정 결과 Point G에서는 최대 2.6cGy가 나왔고, 난소선량인 Point J에서는 최대 0.9cGy로 나타났으며 %Diff값은 0.3%~1.3%였다. 납 앞치마의 사용유무에 따른 선량 차이는 최대 2.1cGy에서 최소 0.1cGy로 나타났으며 %Diff값은 0.1%~1.1%였다. 결 론: 치료계획시스템에서 3가지 치료계획에 따른 선량차이는 최저 0.85%에서 최고 2.45%로 큰 격차를 보이지 않았다. 난소에서 Rando humanoid phantom의 치료계획과 실제 측정한 선량차이는 0.9% 이내로 나타났으나 실제 측정에서 조금 더 높게 측정되었다. 이는 치료계획시스템에서 산란선의 영향을 정확하게 반영하지 못하였고, 실제 측정에서는 TLD를 삽입한 상태로 CBCT를 촬영한 선량과 산란선량이 반영된 것으로 사료된다. 납 앞치마의 유무에 따른 선량측정에서 납 앞치마를 사용했을 경우에 치료범위에서 가까운 거리일수록 차폐의 효과가 있었으며, 치료범위에서 15cm 이상 거리가 있는 경우에는 거의 영향을 미치지 않는 것으로 나타났다. 임상적으로 방사선 치료 중에는 임신이나 인공수정을 하기에는 적절하지 않지만, 치료 중 난소에 조사된 선량은 방사선 치료 후 가임기 여성의 생식 기능에 크게 영향을 주지 않을 것으로 생각된다. 하지만 가임 여성의 경우에는 지속적인 불안감을 가지고 있으므로 이번 결과를 통한 데이터를 제시함으로써 심리적인 안정을 도모할 수 있을 것으로 사료된다.

• 한국토양비료학회지
• /
• 제11권2호
• /
• pp.97-104
• /
• 1979

토양정밀조사결과 우리나라에서 밝혀진 235 개(個)의 토양통에 대하여 분류체계를 확립(確立)코저 미국(美國)의 신토양분류법에 준(準)하였는바 60개(個)의 아군으로 구분할 수 있었다. 그러나 수도재배기간중(水稻栽培期間中) 담수상태(湛水狀態)를 유지(維持)하게되는 답토양들은 신분류법(新分類法)에 분류기준(分類基準)이 확립(確立)되어 있지않아 토양형태적특성에 입각(立脚)하여 분류(分類)코저 할때 무리(無理)가 있음을 알 수 있었다. 답토양의 분류상(分類上) 문제시(問題視)된 것은 토양아군의 수준(水準)에서 18개(個)였으며 이들 새로운 아군에 대하여 분류기준(分類基準)을 설정(設定)(Setup)하였는 바 그 분류시안(分類試案)의 내용(內容)을 요약(要略)하면 다음과 같다. Anthro aquic, Aquic Udipsamments; 관개수(灌漑水)의 영향(影響)을 받아 표토(表土)로 부터 50cm이상(以上) 회색화작용(灰色化作用)을 받은 사질계충적토(砂窒系沖積土)이며 사두(沙頭)및 김천통등(金川統等)이 이에 속(屬)한다. Anthroaquic Udipsamments; 관개수(灌漑水)의 영향(影響)을 받아 표토(表土)로 부터 50cm 이내(以內)에서 회색화작용(灰色化作用)을 받은 사질계충적토(砂窒系沖積土)로 백수통(白岫統)이 이에 속(屬)한다. Halic Psammaquents; 개답년대(開畓年代)가 오래되지 않은 간척지의 염해답으로 낙천통이 이에 속(屬)한다. Anthroaquic, Aquic Udifluvents; 관개수(灌漑水)의 영향(影響)을 받아 표토(表土)에서 50cm이상(以上) 회색화작용(灰色化作用)을 받은 사양질 및 식양질계 충적토로 마영통(馬嶺統)이 이에 속(屬)한다. Anthroaquic Udifluvents: 관개수(灌漑水)의 영향(影響)을 받아 표토(表土)로부터 50cm이내(以內)에서 회색화작용(灰色化作用)을 받은 사양질 및 식양질계 충적토로 행곡통(杏谷統)이 이에 속(屬)한다. Fluventic Haplaquepts: 지하수위(地下水位)가 높아 토양은 전층이 회색화(灰色化)된 습답으로 유기물(有機物)의 함량(含量)은 토심(土深)이 깊어짐에 따라 불규칙적(不規則的)으로 감소(減少)되는 회색토(灰色土)로 백구 및 학성통등(鶴城統等)이 이에 속(屬)한다. Fuventic Thapto-Histic Haplaquepts: Fluventic Haplaquepts와 유사(類似)하나 토양단면내에 유기물층이 개재된 습답으로 공덕(孔德) 및 서탄통(西炭統)이 이에 속(屬)한다. Fluventlc Aeric Haplaquepts: Fluventic Haplaquepts보다 지하수위(地下水位)가 비교적(比較的) 낮으므로 토양배수가 약간 불량(不良)한 회색토(灰色土)로 만경(萬頃) 및 전북통등(全北統等)이 이에 속(屬)한다. Fluventic Thapto-Histic Aeric Hapldquepts: Fluventic Thapto-Histic Haplaquepts보다 지하수위(地下水位)가 비교적(比較的) 낮으므로 토양배수가 약간 불량(不良)한 회색토(灰色土)로 봉남통(鳳南統)이 이에 속(屬)한다. Fluventic Aeric Sulfic Haplaquepts: Fluventic Aeric Haplaquepts에 비(比)하여 토심(土深) 50~150cm 사이에 황색반문(黃色斑紋)(PH<4.0)인 유화물집적층이 있는 회색토(灰色土)로 등구통이 이에 속(屬)한다. Fluventic Sulfaquepts: 이들 토양은 주(主)로 강하류(江下流)에서 바다로 유입(流入)되는 지점(地点) 및 간석 소택지에 분포(分布)되며 표토(表土)에서 50cm이내(以內)에 유화물집적층이 있는 습답으로 봉림(鳳林) 및 해척통(海拓統)이 이에 속(屬)한다. Fluventic Aeric Sulfaquepts: Fluventic Sulfaquepts 보다 지하수위(地下水位)가 비교적(比較的) 깊으므로 토양 배수(排水)가 약간 불량(不良)한 회색토(灰色土)로 김해통(金海統)이 이에 속(屬)한다. Anthro aquic Fluvaquentic Eutrochrepts: 관개수(漑水)의 영향(影響)을 받아 표토(表土)로 부터 50cm이상(以上) 회색화(灰色化)되고 염기포화도가 높은(>60%) 토양이며 장유(長有) 및 칠곡통등(漆谷統等)이 이에 속(屬)한다. Anthro aquic Dystric Fluventic Eutrochrepts: Anthro aquic Fluvaquentic Eutrochrepts와 유사(類似)하나 회색화작용(灰色化作用)은 표토(表土)로부터 50cm이내(以內)에서만 나타나는 토양이며 월곡(月谷) 및 경산통등(慶山統等)이 이에 속(屬)한다. Anthro aquic Fluventic Dystrochrepts; Anthro aquic Dystric Fluventic Eutrochrepts에 비(比)하여 염기포화도가 낮은(<60%) 토양으로 고천(高川) 및 비곡통등(秘谷統等)이 이에 속(屬)한다. Anthre aquic Eutrandepts; 염기포화도가 높은 (>50%) 화산회토(火山灰土)로 대정통(大靜統)이 이에 속(屬)한다. Anthre aquic Hapludalfs; 관개수(灌漑水)의 영향(影響)을 받아 표토(表土)로부터 50cm 이내(以內)에서 회색화작용(灰色化作用)을 받은 적황색토(赤黃色土)로 화동(華東) 및 용수통등이 이에 속(屬)한다. Anthro aquic Aquic Hapludalfs; Anthro aquic Hapludalfs에 비(比)하여 회색화작용(灰色化作用)을 더 받은(표토(表土)에서 50cm이상(以上)) 적황색토(赤黃色土)로 덕평(德坪) 및 극락통등이 이에 속(屬)한다.