• Computers and Concrete
• /
• 제22권5호
• /
• pp.493-500
• /
• 2018

Due to the fact that the ratio of their height to their openings is very large compared to normal beams, there are difficulties in the design and analysis of deep beams, which differ in behavior. In this study, the optimum horizontal and vertical reinforcement diameters of 5 different beams were determined by using genetic algorithms (GA) due to the openness/height ratio (L/h), loading condition and the presence of spaces in the body. In this study, the effect of different mutation operators and improved double times sensitive mutation (DTM) operator on GA's performance was investigated. In the study following random mutation (RM), boundary mutation (BM), non-uniform random mutation (NRM), Makinen, Periaux and Toivanen (MPT) mutation, power mutation (PM), polynomial mutation (PNM), and developed DTM mutation operators were applied to five deep beam problems were used to determine the minimum reinforcement diameter. The fitness values obtained using developed DTM mutation operator was higher than obtained from existing mutation operators. Moreover; obtained reinforcement weight of the deep beams using the developed DTM mutation operator lower than obtained from the existing mutation operators. As a result of the analyzes, the highest fitness value was obtained from the applied double times sensitive mutation (DTM) operator. In addition, it was found that this study, which was carried out using GAs, contributed to the solution of the problems experienced in the design of deep beams.

• Ocean and Polar Research
• /
• 제32권4호
• /
• pp.427-437
• /
• 2010

The Korean Government is trying to construct an ocean research station in Dokdo's water. The station would be the third ocean research station following the Ieodo station and the Gageocho station. Although the new station would served as a scientific research base for peaceful and academic purposes, the construction of the station will almost certainly lead to a diplomatic dispute between Japan and Korea in the near future due to the disputed ownership of the island. In light of the diplomatic protests against the construction of the Ieodo station by the Chinese Government, various domestic and international legal issues which could be raised regarding the construction of the Dokdo station need to be reviewed. Therefore, this article reviews the international legal status of the station and the rights and duties pertaining to its construction, investigates the domestic legal grounds relating to the construction and operation of the marine scientific installation, evaluates the international legal impacts of the construction on the expansion of maritime jurisdiction, the effective control on Dokdo and the negotiations on maritime boundary delimitation, and finally draws conclusions on the future activities of the Korean Government for the construction and operation of the Dokdo Ocean Research Station.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제3권1호
• /
• pp.105-110
• /
• 2011

Some research work on CFD computation of ship motions and added resistance in waves for a high speed trimaran is carried out in this paper. The governing equations, Reynolds Averaged Navier-Stokes and continuity equations are discretized by finite volume method. Volume of fluid method is adopted to deal with the nonlinear free surface. The incident waves are generated from the inflow boundary by prescribing a velocity profile resembling flexible flap wavemaker motions, and the outgoing waves are dissipated inside an artificial damping zone located at the rear part of the wave tank. In this paper, the computed results of ship motion and added resistance for a high speed trimaran are presented. The results of seakeeping experiment for the high speed trimaran carried out in CSSRC towing tank are also presented in this paper. Rather good agreements are shown between the computational and experimental results. The work in this paper provides a numerical tool for the study of seakeeping performance of high speed trimarans.

• 한국환경과학회지
• /
• 제19권6호
• /
• pp.703-714
• /
• 2010

In this study, we analyzed the impact of orographic and thermal forcing on the atmospheric flow field over the urban metropolitan areas on urban artificial buildings and future development plan. Several numerical experiments have been undertaken in order to clarify the impacts of the future development plan on urban area by analyzing practical urban ground conditions, we revealed that there were large differences in the meteorological differences in each case. The prognostic meteorological fields over complex areas of Seoul, Korea are generated by the PSU/NCAR mesoscale model(MM5). we carried out a comparative examination on the meteorological fields of topography and land-use that had building information and future development plan. A higher wind speed at daytimes tends to be forecasted when using new topography and land use data that have a high resolution with an appropriate limitation to the mixing height and the nocturnal boundary layer(NCB). During nighttime periods, since radiation cooling development is stronger after development plan, the decreased wind speed is often generated.

• Wind and Structures
• /
• 제9권1호
• /
• pp.37-58
• /
• 2006

The paper describes a study about effects of upstream hills on design wind loads using two mathematical approaches: Computational Fluid Dynamics (CFD) and Artificial Neural Network (NN for short). For this purpose CFD and NN tools have been developed using an object-oriented approach and C++ programming language. The CFD tool consists of solving the Reynolds time-averaged Navier-Stokes equations and $k-{\varepsilon}$ turbulence model using body-fitted nearly-orthogonal coordinate system. Subsequently, design wind load parameters such as speed-up ratio values have been generated for a wide spectrum of two-dimensional hill geometries that includes isolated and multiple steep and shallow hills. Ground roughness effect has also been considered. Such CFD solutions, however, normally require among other things ample computational time, background knowledge and high-capacity hardware. To assist the enduser, an easier, faster and more inexpensive NN model trained with the CFD-generated data is proposed in this paper. Prior to using the CFD data for training purposes, extensive validation work has been carried out by comparing with boundary layer wind tunnel (BLWT) data. The CFD trained NN (CFD-NN) has produced speed-up ratio values for cases such as multiple hills that are not covered by wind design standards such as the Commentaries of the National Building Code of Canada (1995). The CFD-NN results compare well with BLWT data available in literature and the proposed approach requires fewer resources compared to running BLWT experiments.

• 한국디지털건축인테리어학회논문집
• /
• 제8권1호
• /
• pp.65-74
• /
• 2008

Light creates ambiance that affects our impression of space. Before the modern age, the role of light is a religious factor and a primitive state to see. In the modern space design, light is used to achieve the continuous transformation and translation of building's image. Ever-changing space is a flexible corresponding of space to its environment, caused by certain dynamic light. The space turn into some other thing from what it was before, or just changing its character. approaching men and society with different meanings. The purpose of this study is to explore the relation between light(natural and artificial) and ever-changing space through the case study. The impacts of light on ever-changing in today's space design can be summarized as follows. 1) Materialization of light in space design. Nowadays light becomes a form itself. The geometric properties of the space form playa secondary role as compared to the importance assigned to light. 2) Pixelization of space by a light effect. The impacts of digital technology on the space design have come through enhancing the 'pixelization' of the surface from which buildings are made their responsiveness and adaptability to changing needs. The surface with ever-changing lights that blur the boundary of space and expand the image of space.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2005년도 추계학술대회 논문집
• /
• pp.141-146
• /
• 2005

본 연구에서는 최근 유체역학 유동장 해석분야에서 각광을 받고 있는 PIV 해석기술을 이용하여 소파블럭과 인공어초 주위의 유동을 실험적으로 분석하였다. 실험에 사용된 소파블럭은 현재 현장에서 널리 채택, 운용되는 삼각뿔 tetrapod를 이용하였고 인공어초로는 원통형인 흄관어초 모형을 이용하였다. 유동장 촬영은 소형 회류수조와 아르곤 레이저, 고속 카메라 등을 이용하였다. 최종적으로 영상정보를 이용하여 PIV 해석을 실시, 실험 대상 물체 주위의 경계층(Boundary layer)영역, 박리 현상 등의 유동 특성을 조사하였다.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1996년도 춘계학술대회
• /
• pp.175-178
• /
• 1996

The purpose of this thesis is the propose of various signal processing algorithm for the ECG(electrocardiogram) and the design of realtime automated ECG analyzer feasible with these algorithms. The algorithms are composed of (1)filtering procedure fer the estimation and removal of baseline drift, 60Hz power line interference, and muscle artifacts (2)detection procedure of QRS complex and P wave (3)typification procedure for the pattern classification according to the morphologies (4) selection of representative beat, significant point and wave boundary decision procedure and (5) parameter extraction and diagnosis procedure. All verifications are carried out between the algorithms proposed in this paper and other algorithms already proposed by many researchers, for the objective comparison in each procedure. The efficiency of proposed algorithms are demonstrated with the aid of internationally validated CSE database and the performances of filtering procedure are compared on artificial noise signal as well as actual ECG signals with appropriate noise components. for the comparison on the performance of designed automated ECG analyzer, the diagnosis results were compared with ECG analyzer manufactered by Fukuda denshi in Japan.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2010년도 춘계학술대회
• /
• pp.981-984
• /
• 2010

우리는 본 연구에서 학습방법으로서 연속음성을 초성, 중성, 종성의 음소단위로 분할하기 위하여 인공 신경회로망의 하나인 SVMs을 사용하였으며 분할한 음소단위의 음성으로 연속음성인식에 적용하여 그 성능을 살펴보았다. 음소경계는 단 구간에서의 최대 주파수를 가진 알고리듬에 의하여 결정되며 또한 음성인식처리는 CHMM에 의하여 이루어지며 목측에 의한 분할결과와도 비교하여 살펴보았다. 시뮬레이션 결과로부터 초성의 분할성능에서 제안한 SVMs를 적용한 결과가 GMMs보다 효율적인을 알 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1035-1037
• /
• 2005

The analysis of magnetic fields(2-D) induced by line currents, such as Overhead Trolley Lines or Transmission Lines, is not so easy by using the standard Finite Element Method(FEM). Mesh generation is one of the most important processes in the standard FEM. Because, the current region is relatively small compared with whole region, and actually is a line without thickness, the mesh refinement around the source lines yields many demerits. A way of supplement such a defect, we proposed the coupling scheme of analytical solution and FEM. In this study, the analytical solution is adopted around the region of line currents and FE solution is a lied to the rest of source region. And the two types of solution are coupled at the artificial boundary. To verify the usefulness of proposed algorithm, simplified model with magnetic material in FE region is chosen and analyzed. The results are compared with those of standard FEM. And the errors between them can be reduced by increasing harmonic orders.