• Journal of Mushroom
• /
• v.13 no.2
• /
• pp.114-118
• /
• 2015

Mycoleptodonoides aitchisonii has been used a culinary material and traditional medicine for a long time in worldwide and recently the researches to find biological effects have been increased such as dopamine activation, preventive effect against phytopathogens, inhibitive effect against erythrocyte coagulation, anti-oxidative effect, anti-tumorigenic effect, etc. However it is hard to cultivate Mycoleptodonoides aitchisonii it is impossible to be mass-produced and in order to solve the problem in this study we found the appropriate cultivation period and the harvest point for it. For life cycle (from primordium formation to harvest) the morphology, weight, and quantity of polysaccharide of Mycoleptodonoides aitchisonii were measured using with 5 bodies per a day and it could be divided for 4 stages; primordium formation, growth, needle maturation, and aging. And then from the results the Zeide nonlinear growth curve could be gotten. At 13th day after cultivation there is the relation between the change of media weight and body weight and at 14th day after cultivation the rate of polysaccharide in the body was 11 %. However in the case of O2 insufficient supply the malformation of them was observed.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.59 no.3
• /
• pp.230-238
• /
• 2014

The purpose of this study was to develop the cost-effective and efficiency seed longevity prediction method of rice (Oryza sativa L.) germplasm for viability monitoring. To find an optimum predicting method for rice seed longevity at genebank, an accelerated ageing (AA) test, a controlled deterioration (CD) test and a dry-heat treatment (DHT) were conducted to the four groups of rice germplasm based on ecotype, such as Indica, Japonica, Javanica and Tongil type. Among the three artificial aging treatments, the dry-heat treatment of 36 hours at $90^{\circ}C$ is suggested as a routine predictive test method of rice germplasm longevity at a genebank. The distribution of germination rate on 3,066 accessions which conserved 26.5 years at $4^{\circ}C$ showed similar trend with the result of distribution by dry-heat treatment at $90^{\circ}C$ on 36 hours using 106 accessions of rice selected samples which composed four ecotype groups. The results show that the dry-heat treatment affect not only predicting the rice seed longevity but also determining effective interval for monitoring germination of rice germplasm in genebanks.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.102-102
• /
• 2018

Electronic industry had required the finer size and the higher performance of the device. Therefore, 3-D die stacking technology such as TSV (through silicon via) and micro-bump had been used. Moreover, by the development of the 3-D die stacking technology, 3-D structure such as chip to chip (c2c) and chip to wafer (c2w) had become practicable. These technologies led to the appearance of HBM (high bandwidth memory). HBM was type of the memory, which is composed of several stacked layers of the memory chips. Each memory chips were connected by TSV and micro-bump. Thus, HBM had lower RC delay and higher performance of data processing than the conventional memory. Moreover, due to the development of the IT industry such as, AI (artificial intelligence), IOT (internet of things), and VR (virtual reality), the lower pitch size and the higher density were required to micro-electronics. Particularly, to obtain the fine pitch, some of the method such as copper pillar, nickel diffusion barrier, and tin-silver or tin-silver-copper based bump had been utillized. TCB (thermal compression bonding) and reflow process (thermal aging) were conventional method to bond between tin-silver or tin-silver-copper caps in the temperature range of 200 to 300 degrees. However, because of tin overflow which caused by higher operating temperature than melting point of Tin ($232^{\circ}C$), there would be the danger of bump bridge failure in fine-pitch bonding. Furthermore, regulating the phase of IMC (intermetallic compound) which was located between nickel diffusion barrier and bump, had a lot of problems. For example, an excess of kirkendall void which provides site of brittle fracture occurs at IMC layer after reflow process. The essential solution to reduce the difficulty of bump bonding process is copper to copper direct bonding below $300^{\circ}C$. In this study, in order to improve the problem of bump bonding process, copper to copper direct bonding was performed below $300^{\circ}C$. The driving force of bonding was the self-annealing properties of electrodeposited Cu with high defect density. The self-annealing property originated in high defect density and non-equilibrium grain boundaries at the triple junction. The electrodeposited Cu at high current density and low bath temperature was fabricated by electroplating on copper deposited silicon wafer. The copper-copper bonding experiments was conducted using thermal pressing machine. The condition of investigation such as thermal parameter and pressure parameter were varied to acquire proper bonded specimens. The bonded interface was characterized by SEM (scanning electron microscope) and OM (optical microscope). The density of grain boundary and defects were examined by TEM (transmission electron microscopy).

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.33 no.3
• /
• pp.50-57
• /
• 2015

A traditional garden in Korea has diverse cultural, historical values, such as the then phases of the times, life phase, culture and art, etc. because it was developed on the basis of the harmony between nature and artificial structures. However, in reality, it's urgent to do efficient, continuous maintenance of traditional gardens which are being damaged and lost due to the problems like an owner's aging, inheritance, and lack of management, etc., especially in case of private property which was designated as a cultural property among such traditional gardens under the Cultural Properties Protection Law. Accordingly, this study conducted this research in a bid to use these research results as basic evidentiary materials for suggesting directivity in introduction of park planning of traditional gardens in folk houses in the near future by implementing the case investigation of transformation into public parks from traditional private gardens in Japan, which is putting the newly introduced park planning to efficient use, together with its systematic management, and the survey on domestic traditional gardens in folk houses status, as well as the hearing-based survey on a traditional gardens in folk houses owner's level of willingness to accept the introduction of parking planning. As a result, this study could confirm that in case of traditional gardens in Japan, they are mobilizing the revenue from admission fees for traditional gardens maintenance by incorporating the main entity of possession, and Japan is promoting transformation of traditional gardens into parks on the basis of use and preservation through the connection with local governments and research institutes. In addition, as a result of surveying domestic traditional gardens in folk houses, it was found that most of the garden owners had hardships in its management, and they were positive about systematic maintenance of gardens through park planning.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.32 no.3
• /
• pp.184-193
• /
• 2016

Purpose: To evaluate marginal leakage of bulk fill flowable composite resin filling with different curing time by using microcomputed tomography technology. Materials and Methods: 30 previously extracted human molars were randomly divided into 6 groups based upon restorative system and different curing time. Class II cavities (vertical slot cavities) were prepared. An individual metallic matrix was used to build up the proximal wall. The SonicFill or SureFil SDR flow was inserted into the preparation by using 1 bulk increment, followed by light polymerization for different curing times. The different exposure times were 20, 40, and 60 seconds. All specimens were submitted to 5,000 thermal cycles for artificial aging. Micro-CT scanning was performed by using SkyScan 1272. One evaluator assessed microleakage of silver nitrated solution at the resin-dentin interface. The 3D image of each leakage around the restoration was reconstructed with CT-Analyser V.1.14.4. The leakage was analyzed with the Mann-Whitney test. Results: Significant differences were observed between the light curing times, but no significant differences were found between the bulk fill composite resins. Increasing in the photoactivation time resulted in greater microleakage in all the experimental groups. Those subjected to 60 seconds of light curing showed higher microleakage means than those exposed for 20 seconds and 40 seconds. Conclusion: Increasing the photoactivation time is factor that may increase marginal microlekage of the bulk fill composite resins. Further, micro-CT can nondestructively detect leakage around the resin composite restoration in three dimensions.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.7 no.1
• /
• pp.51-58
• /
• 2013

As it is changing into aging society, rehabilitation, welfare and sports industry markets are being expanded fast. Especially, the field of vital signals interface to control welfare instruments like wheelchair, rehabilitation ones like an artificial arm and leg and general electronic ones is a new technology field in the future. Also, this technology can help not only the handicapped, the old and the weak and the rehabilitation patients but also the general public in various application field. The commercial bio-signal measurement instruments and interface systems are complicated, expensive and large-scaled. So, there are a lot of limitations for using in real life with ease. this thesis proposes a wireless transmission interface system that uses EMG(electromyogram) signals and a control module to manipulate hardware systems with portable size. We have designed a hardware module that receives the EMG signals occurring at the time of wrist movement and eliminated noises with filter and amplified the signals effectively. DSP(Digital Signal Processor) chip of TMS320F2808 which was supplied from TI company was used for converting into digital signals from measured EMG signals and digital filtering. We also have used PCA(Principal Component Analysis) technique and classified into four motions which have right, left, up and down direction. This data was transmitted by wireless module in order to display at PC monitor. As a result, the developed system obtains recognition success ratio above 85% for four different motions. If the recognition ratio will be increased with more experiments. this implemented system using EMG wrist direction signals could be used to control various hardware systems.

• The Journal of Bigdata
• /
• v.6 no.1
• /
• pp.37-49
• /
• 2021

The number of dementia patients in Korea is estimated to be over 800,000, and the severity of dementia is becoming a social problem. However, no treatment or drug has yet been developed to cure dementia worldwide. The number of dementia patients is expected to increase further due to the rapid aging of the population. Currently, early detection of dementia and delaying the course of dementia symptoms is the best alternative. This study presented a methodology for early diagnosis of dementia by measuring and analyzing amyloid plaques. This vital protein can most clearly and early diagnose dementia in the retina through AI-based image analysis. We performed binary classification and multi-classification learning based on CNN on retina data. We also developed a deep learning algorithm that can diagnose dementia early based on pre-processed retinal data. Accuracy and recall of the deep learning model were verified, and as a result of the verification, and derived results that satisfy both recall and accuracy. In the future, we plan to continue the study based on clinical data of actual dementia patients, and the results of this study are expected to solve the dementia problem.

• KIPS Transactions on Computer and Communication Systems
• /
• v.12 no.3
• /
• pp.119-126
• /
• 2023

Sarcopenia is not well known enough to be classified as a disease in 2021 in Korea, but it is recognized as a social problem in developed countries that have entered an aging society. The diagnosis of sarcopenia follows the international standard guidelines presented by the European Working Group for Sarcopenia in Older People (EWGSOP) and the d Asian Working Group for Sarcopenia (AWGS). Recently, it is recommended to evaluate muscle function by using physical performance evaluation, walking speed measurement, and standing test in addition to absolute muscle mass as a diagnostic method. As a representative method for measuring muscle mass, the body composition analysis method using DEXA has been formally implemented in clinical practice. In addition, various studies for measuring muscle mass using abdominal images of MRI or CT are being actively conducted. In this paper, we develop an AI image segmentation model based on abdominal images of CT with a relatively short imaging time for the diagnosis of sarcopenia and describe the multicenter validation. We developed an artificial intelligence model using U-Net that can automatically segment muscle, subcutaneous fat, and visceral fat by selecting the L3 region from the CT image. Also, to evaluate the performance of the model, internal verification was performed by calculating the intersection over union (IOU) of the partitioned area, and the results of external verification using data from other hospitals are shown. Based on the verification results, we tried to review and supplement the problems and solutions.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.50 no.2
• /
• pp.119-129
• /
• 2024

The cutaneous lymphatic system in humans plays a crucial role in draining interstitial fluid and activating the immune system. Environmental factors, such as ultraviolet light and natural aging, often affect structural changes of such lymphatic vessels, causing skin dysfunction. However, some limitations still exist because of no alternatives to animal testing. To better understand the skin lymphatic system, a biomimetic microfluidic platform, skin-lymph-on-a-chip, was fabricated to develop a novel in vitro skin lymphatic model of humans and to investigate the molecular and physiological changes involved in lymphangiogenesis, the formation of lymphatic vessels. Briefly, the platform involved co-culturing differentiated primary normal human epidermal keratinocytes (NHEKs) and dermal lymphatic endothelial cells (HDLECs) in vitro. Based on our system, Lymphanax^TM, which is a condensed Panax ginseng root extract obtained through thermal conversion for 21 days, was applied to evaluate the lymphangiogenic effect, and the changes in molecular factors were analyzed using a deep-learning-based algorithm. Lymphanax^TM promoted healthy lymphangiogenesis in skin-lymphon-a-chip and indirectly affected HDELCs as its components rarely penetrated differentiated NHEKs in the chip. Overall, this study provides a new perspective on Lymphanax^TM and its effects using an innovative in vitro system.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.50 no.2
• /
• pp.153-161
• /
• 2024

Vitamin D is a fat-soluble vitamin that is mainly produced in the skin by UV rays. Along with melatonin, it is a representative chronobiotic substance, and the skin plays an important role in distinguishing between day and night. However, vitamin D cannot be used directly in cosmetics because it is a vitamin that acts as a coenzyme and plays a hormonal role in regulating the expression of various types of genes. Therefore, it was to investigate the skin efficacy of provitamin D (7-dehydrocholesterol), a vitamin D precursor that can be used in cosmetics. Our findings reveal that pro vitamin D can effectively inhibit the expression of tyrosinase, the melanin-producing enzyme, thereby attenuating melanin synthesis. This skin tone regulatory effect has been corroborated in vitro using artificial skin models. Additionally, pro vitamin D demonstrated anti-inflammatory properties by suppressing the expression of TNFa and, upon conversion to vitamin D through UV exposure, it was observed to induce the production of the antimicrobial peptide CAMP (LL-37). The inhibitory effect of pro vitamin D on melanin production appears to be a result of it reducing the UV absorption capacity of melanin, thereby inducing the conversion of pro D to vitamin D. Utilizing pro vitamin D in cosmetic formulations could not only modulate skin tone and enhance skin immunity but also expect to contribute to other cutaneous benefits as anti-aging and barrier function improvement with everyday UV exposure. This multifaceted efficacy positions pro vitamin D as a promising ingredient in advancing the formulation of skin care products.