• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.1
• /
• pp.46-50
• /
• 2015

The cable degradation process is largely divided into three steps; Step 1 : Thermal degradation, Step 2 : Weibull degradation, Step 3 : Partial discharge. it is progress in step order. This article aims to explain the process of cable degradation using the method of insulation resistance and accordingly to compose and manufacture a system of measuring the life of electrical cable. Before measuring the insulation resistance, a system of measuring the temperature and current of cables was made, and the established system was installed for test on the site of a power plant to collect the measured data. The current sensor was used TFC30P80A-CL420, and temperature sensor was used the DK-1270 PT100 sensor as RTD sensor. When measured the temperature and the load current at the same position, was confirmed that in case of the load current value was high, also temperature value high. Therefore, the correlation between load currents and temperature was verified, and the analysis of diagnostic data was evaluated, which could be utilized in identifying the fault condition of cable systems.

• Polymer(Korea)
• /
• v.30 no.2
• /
• pp.97-107
• /
• 2006

In spite of excellent thermomechanical performance the majority of aromatic polyimides are so poor in processability due to their high backbone rigidity that their applications are greatly limited. The introduction of long side chains not only enhances their processiblity but also makes useful contribution to discovering new application fields. In this article, a variety of novel aromatic polyimides with flexible side chains were prepared either from new dimines or new dianhydrides to measure the influence of the side chains on structure and properties of the polymers and their new applications as liquid crystal alignment layers, photosensitive polymers, alternating multilayer nano-films and photoluminescent materials are discussed.

• Journal of muscle and joint health
• /
• v.7 no.2
• /
• pp.227-240
• /
• 2000

The purpose of this article was to identify trend in Arthritis research and to provide ba an approach of Arthritis research. The results of analysis of 69 Arthritis articles public year of between 1970-1999 found that most articles(27.6%, n=19) were published since few(10.1%, n=7) were before 1994. Vast majority of articles(79.8%, n=55) were printed in The Journal of Rheumatology Health, and 79.8%(n=55) of those were quantitative research, 8.7%(n=6) were qualitative research, and 14%(n=1) was methodological research. 29.0%(n=20) of quantitative research were carried in experimental design and over half(50.8%, n=35) in nonexperimental design. Having concerned the types of treatment(or intervention) used in experimental study, the most common treatment was 'exercise' (45.0%, n=9), and other less common were 'self-help education(15.0%, n=3), home care(10.0%, n=2) supportive care(10.0%, n=2), flexibility exercise combined with local heat therapy(5.0%, n=1), relaxation training(5.0%, n=1). Of the types of exercise, aquatic exercise was 30.0%(n=6). The effect of exercise on outcome variable was found to be most strong among the other types of treatment. 18 articles of nonexperimental research were correlational research. From the analysis of correlational research, 29 concepts were identified, and the relationship between depression and other variable were strongly reported. In descriptive studies, most commonly physiological variables were examined in 5 articles(29.5%). Only one study(5.9%) explored patient's perception of the causal factors and those causality. In qualitative researches, two study were carried out by the means of grounded theory. Majority of those subjects were RA patients, and the largest number of sample were 23 and the smallest was 1 In two studies, patient's perceived causality of RA was identified as a research problems, and an experience of ADL, fatigue Phenomenon, an experience of having a total knee replacement with osteoarthritis were each found in one study. Methodological research was carried out to test validity and reliability of the RA Fatigue Scale.

• Hwankyungkyoyuk
• /
• v.22 no.3
• /
• pp.83-96
• /
• 2009

This article extracted feasible elements for an environmental education program from the 'Intelligent Life', an integrated subject of the 7th elementary school curriculum, and designed a program for second graders in the elementary school and applied it to them in order to examine how the students' environmental altitudes changed. In the controlled class, the instruction followed the lessons specified in the 7th national curriculum faithfully while for the experimental class 1, only the inquiry activity-based environmental education program was applied. Moreover, in experimental class 2, the inquiry activity-based environmental education program was implemented and wrap-up activity was performed as well with the products. To verify the program, questionnaires on the change of environmental altitudes were distributed and analyzed total three times in the pretest, posttest 1(right after the program), and posttest 2(30 days after the program). T-test was carried out with the SPSS 12 program to verify the effect of the applied program. To make up for the quantitative analysis, qualitative analysis was also conducted. The followings show the results gained after the program was implemented. First, This program showed a significant difference(p<.05) in the students' formation of environmental altitudes. Second, it was verified that the inquiry activity-based environmental education class that reorganized the second grade elementary students' 'Intelligent Life' subject had a more positive effect in the cultivation of environmental altitude than the class that followed the present curriculum as it was. It will be necessary to perform follow-up researches on the relativity between curricula for kindergarteners and lower grade elementary school students.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.35
• /
• pp.71-98
• /
• 2007

UCP 600 approved at the Banking Commission Meeting of ICC at the end of October, 2006 comes into effect from July 1, 2007. The main revision of the UCP 600 concerning the sea transport document are as follows. First, if the bill of lading contains an on-board-notation, with the date of shipment, the date stated in the on-board-notation will be deemed the date of shipment. Secondly, phrases "on its face" and "otherwise authenticated" should be eliminated. Thirdly, when an agent signs for or signs on behalf of the master, there is no longer a need for the name of master to be quoted. Fourthly, the terminology "loading on-board or shipped on a named vessel" is changed to "shipped on-board a named vessel." Fifthly, phrases "the rejection of the documents transported only by sail" is removed. Finally, new rule in UCP is the signing of a charter party bill of lading by the charterer or a named agent on behalf of the charterer. My assessment of the revision in UCP 600 is as follows: Because a freight forwarder transport document is a weaker form than a liner bill of lading as collateral, banks may need a secure measure as to protect themselves from such a weak collateral effect. we recognize that Such a weak collateral effect stemmed from the elimination of rules in UCP 500 article 30, and the admission of transport documents issued by the freight forwarder as long as any one besides carrier, shipper, and charterer satisfies the requirements of transport document clauses in UCP 600. Finally, I hope the Commentary on UCP 600 will serve to explain the ambiguities remaining in the new rules.

• Journal of the Korean Society for information Management
• /
• v.28 no.3
• /
• pp.13-30
• /
• 2011

Faceted navigation has brought a lot of changes to traditional library catalog and is one of the resource discovery interfaces in next-gen library catalog. Faceted navigation usually divides too much retrieved results into some relevant facets for user's convenient navigation. The faceted navigation of 9 libraries adopting resource discovery interfaces was analyzed in this article. The terms are much broader or different from the users' terms so that the users can't properly use the facets. It is essential to maintain consistency with using the terms to provide users with faceted navigation service and this study has found how exactly authority work was done in analysis of the author facets. Also, public libraries introducing faceted navigation need to consider including some facets for various users and university libraries need to consider detailed division of resource types.

• Korean Journal of Veterinary Service
• /
• v.34 no.4
• /
• pp.429-439
• /
• 2011

This article described the comparison of a quick, easy, cheap, effective, rugged and safe (QuEChERS) sample preparation and the classical method established by National Veterinary Research and Quarantine Service (NVRQS) for the determination of pesticide residues in livestock products using GC-tandem mass spectrometry. The classical method by NVRQS used liquid-liquid partioning followed by evaporizing. The modified QuEChERS entailed extraction of 2 g sample with 15 ml acetonitrile containing 1% acetic acid followed by addition of 6 g anhydrous magnesium sulfate and 1.5 g sodium acetate. After centrifugation, 6 ml of the extract underwent a cleanup step (in a technique known as column-based solid phase extraction) using 400 mg each of $C_{18}$ and primary secondary amine sorbents plus 1,200 mg magnesium sulfate. The quantitation of individual pesticides by both methods was based on tissue standard calibration curves with a correlation coefficient in excess of 0.98 for the 24 pesticides. The detection limits by the classical method were ranged 1.3~5.0 ${\mu}g$/kg, with mean recoveries between 76.2% and 114.3% except aldrin (59.3%) and deltamethrin (63.6%). The detection limits by modified QuEChERS were ranged 0.3~6.2 ${\mu}g$/kg, with mean recoveries between 68.0% and 114.3% except dimethipin (152.6%), chlorfenvinphos (138.1%), 4,4-DDT (61.5%), aldrin (60.4%) and chinomethionate (30.3%).

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.34 no.2
• /
• pp.148-154
• /
• 2012

Peripheral nerve injuries in the oral and maxillofacial regions require nerve repairs for the recovery of sensory and/or motor functions. Primary indications for the peripheral nerve grafts are injuries or continuity defects due to trauma, pathologic conditions, ablation surgery, or other diseases, that cannot regain normal functions without surgical interventions, including microneurosurgery. For the autogenous nerve graft, sural nerve and greater auricular nerve are the most common donor nerves in the oral and maxillofacial regions. The sural nerve has been widely used for this purpose, due to the ease of harvest, available nerve graft up to 30 to 40 cm in length, high fascicular density, a width of 1.5 to 3.0 mm, which is similar to that of the trigeminal nerve, and minimal branching and donor sity morbidity. Many different surgical techniques have been designed for the sural nerve harvesting, such as a single longitudinal incision, multiple stair-step incisions, use of nerve extractor or tendon stripper, and endoscopic approach. For a better understanding of the sural nerve graft and in avoiding of uneventful complications during these procedures as an oral and maxillofacial surgeon, the related surgical anatomies with their harvesting tips are summarized in this review article.

• The Journal of the Korean dental association
• /
• v.53 no.7
• /
• pp.468-475
• /
• 2015

In cleft lip and palate (CLP) patients, there are various degree of residual maxillofacial deformities in adolescent period. Usually, orthoganthic surgery for the cleft patients needs Le Fort I osteotomy and/or mandibular set-back surgery. Previous report from other institute had been shown that there is significant relapse after maxillary movement after Le Fort I osteotomy when the surgical advancement of the maxilla was over than 5 or 7mm in average. Recent comphrehensive report showed that most of the relapse was happened within 1 year and the total horizontal relapse of the maxilla was as high as 30% in average. Therefore, overcorrection is needed in maxillary surgery for cleft patients. Another concerns for cleft orthognathic surgery is the anatomical variation in pterygomaxillary region in cleft patients compared to control patients. Patients with CLP had larger and thicker pterygomaxillary dimensions, and the results imply that careful attention to pterygomaxillary anatomy is needed in patients with CLP undergoing Le Fort I surgery. This article reviews the pre and postoperative considering factors for orthognathic surgery for CLP patients.

• Wind and Structures
• /
• v.13 no.5
• /
• pp.413-431
• /
• 2010

The focus of this article is on the assessment of vertical wind vector components and their aerodynamic impact on lattice framework, specifically two distinct sections of a guyed transmission tower. Thunderstorm winds, notably very localized events such as convective downdrafts (including downbursts) and tornadoes, result in a different load on a tower's structural system in terms of magnitude and spatial distribution when compared to horizontal synoptic winds. Findings of previous model-scale experiments are outlined and their results considered for the development of a testing rig that allows for rotation about multiple body axes through a series of wind tunnel tests. Experimental results for the wind loads on two unique experimental models are presented and the difference in behaviour discussed. For a model cross arm with a solidity ratio of approximately 30%, the drag load was increased by 14% when at a pitch angle of $20^{\circ}$. Although the effects of rotation about the vertical body axis, or the traditional 'angle of attack', are recognized by design codes as being significant, provisions for vertical winds are absent from each set of wind loading specifications examined. The inclusion of a factor to relate winds with a vertical component to the horizontal speed is evaluated as a vertical wind factor applicable to load calculations. Member complexity and asymmetric geometry often complicate the use of lattice wind loading provisions, which is a challenge that extends to future studies and codification. Nevertheless, the present work is intended to establish a basis for such studies.