• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.1693-1706
• /
• 2008

It is of importance to determine the zero effective stress void ratio($e_{00}$), which is the void ratio at effective stress equal to zero, and the relationships of void ratio-effective stress and of void ratio-hydraulic conductivity for characterizing non-liner finite strain consolidation behavior for ultra-soft dredged materials. The zero effective stress void ratio means a transitional status from sedimentation to self-weight consolidation of very soft soil deposits, and acts as a starting point for self-weight consolidation in the non-linear finite strain numerical analysis such as PSDDF. In this paper, a new method for determining the zero effective stress void ratio has been introduced with the aid of measuring electrical resistivity of the specimen. A correlation between the zero effective stress void ratio and the initial slurry void ratio has been proposed, which can be used in PSDDF analysis as an input parameter. Combining all of the accessible experimental data, the consolidation characteristics of a dredged soil from the Incheon area has been studied in detail.

• 정보화연구
• /
• 제9권1호
• /
• pp.79-93
• /
• 2012

본 연구는 EA 전문가의 역량을 정의하기 위해 국내외 교육과정을 살펴보고, EA 전문가의 기초적이고 공통적인 역량을 도출하였다. 특히 EA의 다양한 이해당사자들이 공통으로 참조하고 활용할 수 있는 역량을 정의하여 향후의 지속적인 발전모델의 기초로 삼고자 하였다. 본 연구에서는 EA의 공통, 개발, 분석, 관리 등 4개 핵심역량을 정하여 각 역량의 정의를 제시하였으며 경력 단계별(아키텍트, 엔터프라이즈 아키텍트, 수석 아키텍트)로 역량의 중요도를 구분하였다. 본 연구결과는 EA 전문가와 정보화 담당자의 EA 이해도를 제고하고 역량을 강화하기 위한 교육과정의 표준 역량과 커리큘럼 작성에 시사점을 제공할 수 있다.

• 한국가시화정보학회지
• /
• 제20권3호
• /
• pp.128-135
• /
• 2022

Cavitation occurs inevitably in marine propellers rotating at high speed in the water, which is a major cause of underwater radiated noise. Cavitation-induced noise from propellers rotating at a specific frequency not only reduces the sonar detection capability, but also exposes the ship's location, and it causes very fatal consequences for the survivability of the navy vessels. Therefore cavity inception speed (CIS) is one of the important factors determining the special performance of the ship. In this study, we present a method using computer vision that can detect and quantitatively estimate tip vortex cavitation on a propeller rotating at high speed. Based on the model test results performed in a large cavitation tunnel, the effectiveness of this method was verified.

• 국제학술발표논문집
• /
• The 4th International Conference on Construction Engineering and Project Management Organized by the University of New South Wales
• /
• pp.58-65
• /
• 2011

Construction Productivity is one of the most important elements in construction management. It is used in construction process scheduling and cost management, which are significant sector in construction management. It is important to make appropriate schedule and monitor how works are done within schedule. But construction project contains uncertainty and inexactitude, modifying construction schedule is being an issue to manage construction works well. Even though prediction and monitoring of productivity can be principal activity, it is hard to predict productivity with manager's experience and a standard of estimate. A large number of factors influencing productivity, such as drawing, construction method, weather, labor, material, equipment, etc. But current calculation of productivity depends on empirical probability, not consider difference of each influencing factor. In this research, the aim is to present a productivity predicting regression model of form work, which includes effectiveness of influences factors. 5 variables existed inside form work are selected by interview and site research based on literature review of existed various productivity influencing factors. The effectiveness and correlation of productivity influencing factors are analyzed by statistical approach, and it is used to make productivity regression model. The finding of this research will improves monitoring and controlling of project schedule in construction phase.

• 국제학술발표논문집
• /
• The 9th International Conference on Construction Engineering and Project Management
• /
• pp.1067-1074
• /
• 2022

An architect creates his/her design to meet owner's requirements. Floor plans, perspective drawings, and scale models are used in order for the owner to choose the design. The tools are a little helpful for communication between the architect and the owner in case the owner does not know architecture. The scale models are good, but it is hard to make scale models while design is in progress. 3D CAD is a good tool for communication, but it is time-consuming and requires high-performance computer hardware. Augmented reality is able to show 3D virtual models that are updated by the architect with smart devices such as a smart phone and a tablet PC. The owner frequently reviews the updated design anytime anywhere. This study proposes a method to use augmented reality for architectural design and construction management. The method supports the communication between the owner, the architect and the contractor to review updated designs, and to complete the building project. 3D models expressed in augmented reality are created using SketchUp with 2D drawings for building construction. An Android application implementing augmented reality is developed by Qualcomm Vuforia and Unity on smart devices. Drawings as markers and 3D models are connected in Unity. And functions that temporarily hide unnecessary parts can be implemented in C# programming language. If an owner, an architect, or a contractor looks at a smart phone on a 2D drawing, he/she can identify building elements such as 3D buildings or columns on a screen. This can help communication between them.

• 한국디지털건축인테리어학회논문집
• /
• 제5권2호
• /
• pp.15-20
• /
• 2005

It extended in the opening after simultaneous strong point flag and to Incheon the building where the designer whom the many modem time building comes to build but becomes known was not many so. The research against these people did not become accomplished and not to be the back author research which analyzes the work propensity which is the possibility of doing the possibility of becoming accomplished there was not a basic of architectural design. The research which it sees it led and khu lu thu the road khey keyl the back the depths data, it confronted compared to it secured does not become known during that time the multi architect who and the plan office and and and it searched the result of the back which it puts out well it put to the architects who become known and.

• 한국실내디자인학회논문집
• /
• 제13권1호
• /
• pp.30-37
• /
• 2004

Architect Daniel Libeskind made peculiar works with ‘Jewish Museum’ in Berlin as a momentum in 1989. The concern was concentrated after Libeskind was selected ultimately to the designer of ‘Design for the World Trade Center site’ in February 2003. Especially his works which have been recently accomplished are not the deconstructivism were recognized as unreal drawings and simple studies but they are professing his own peculiar architectural thought. However meanwhile researches about Libeskind have been processed in an architect viewpoint of a deconstructivism tendency, lack of researches to be more various point of view. This study fundamentally is sharing the source with Libeskind's basic idea, as a deconstructivism architect, but not to understand essential concept of decorstructivism which has the philosophy grasps of essence of an object, reconstrues contradiction that the human is simple to prescribe by the language and tries to express in new architectural formative volition. Therefore, the purpose of this study is to grasp of Libeskind's own architectural thought of the essence, consider background becomes the foundation of the architectural thought and peculiarity of the architectural representation.

• 한국실내디자인학회논문집
• /
• 제14권5호
• /
• pp.71-79
• /
• 2005

Thinking methods have been widely recognized as phenomenon of problem solving in architectural design process and as one of the bases of creativity. In recent years the study of thinking methods have become a major focus of design research. And the purpose of the paper will understand the phenomenon of characteristic and classification of thinking methods in the architectural design process. Extensive protocols are recorded. In particular, the protocols contain sufficient information to make a detailed picture of the architect's problem-solving processes. A protocol study is reported in which the experimental data by architect's is analyzed through the visual protocol analysis method. These findings will help understand the architectural design nature. And they supply a direction for creative education for architects and the base for CAAD system development through understanding for architect's thinking methods.

• 한국실내디자인학회논문집
• /
• 제26호
• /
• pp.121-128
• /
• 2001

This study deals with 'Sachlichkeit' , as essence of materiality that architectural building materials process, which forms the physical basis for actual building. There have beennu merous researches that deals with various elements that compose architecture, but the emphasis seemed to be concentrated on the meta-physical discussion concerning formal concept. An issue on sachlichkeit as materiality does not necessary mean to mention production process of architecture, rather it is aim of this study to seek possibility to find elements that generate architectural form, through interpreting meaning of materials as substructure generator to make architectural possible. Architectural act can be defined as a process where physical material in life is composed into architecture by the hands of architect. Material used in life is composed into architecture by the hands of architect. Material used in this process basically has neutral characteristic, so 'Sachlichkeit'solely depends on the intentions of architects. This study interprets the intention of architects through the frame of modern-basis proposed by Hilberseimer, and a result architecture is defined as an object projected by architect's subjectivity.

• 시스템엔지니어링학술지
• /
• 제10권1호
• /
• pp.17-32
• /
• 2014

The trade-off studies in the concept development stage to assess the relative goodness of alternative systems concepts for AE (architect engineering) design for the Barge Mounted SMR (BMSMR) is introduced. With respect to design margin, system performance, schedule and risk, the design selection is cond ucted using the following characteristics; barge mobility, system safety under the natural disaster (seismic), power output, interfacing with the other system, and the additional supporting functions as desalination. There are three findings that should be remedied; deficiencies in the assumed characteristics of the system being modeled, deficiencies in the test model, and excessively stringent system requirements. This study is performed using systems engineering approach with trade off matrix method. In order to execute this work, concept development stage is divided into three (3) phases as NA (needs analysis), CE (concept exploration), and CD (concept definition).