• 한국지진공학회논문집
• /
• 제22권6호
• /
• pp.333-343
• /
• 2018

In this paper, we study the existing results of the structure-soil-structure interaction (SSSI) effect on seismic responses of structures and summarize important parameters. The parameters considered in this study are a combination of buildings in the power block of a nuclear power plant, the characteristics of earthquake ground motions and its direction, and the characteristics embedded under the ground. Based on these parameters, the seismic analysis model of the structures in the power block of the nuclear power plant is developed and the structure-soil-structure interaction analyses are performed to analyze the influence of the parameters on the seismic response. For all analyses, the soil-structure interaction (SSI) analysis program CNU-KIESSI, which was developed to enable large-sized seismic analysis, is used. In addition, the SSI analyses is performed on individual structures and the results are compared with the SSSI analysis results. Finally, the influence of the parameters on the seismic response of the structure due to the SSSI effect is reviewed through comparison of the analysis results.

• 한국공간구조학회논문집
• /
• 제8권5호
• /
• pp.47-58
• /
• 2008

대공간 구조는 형태저항구조로서, 기둥-보로 구성되는 일반적인 건축골조구조가 설계외력에 대해 휨 및 전단으로 저항되는 것에 반해, 구조물의 내부에 기둥이 없는 공간을 내포하는 대공간 구조는 축력 및 면내 단면력에 의해 저항되는 경우가 대부분이다. 이러한 특성상 공간구조에는 일반적으로 장스팬이 사용되는 경우가 많으며, 그 결과 일반적인 골조와는 달리, 부재에 발생하는 변형도가 작은 경우에도 큰 변형이 발생하는, 즉 대변형 혹은 유한변형을 동반하게 된다. 일반적으로 수치해석에 있어 비선형 해석이란 기하학적 비선형 및 재료적 비선형, 또는 이 두 가지를 동시에 고려한 복합 비선형 해석을 들 수가 있다. 본 논문에서는 유한요소법으로 기하학적 비선형을 고려한 비선형 평형방정식을 적용하고, 부재의 응력-변형률 관계를 이용하여 재료적 비선형성도 함께 고려하였다. 사용된 수치해석 기법은 불안정 경로의 해를 찾아갈 수 있는 호장법을 적용하여 하중-변위 곡선을 추적하였다. 또한, 해석 결과는 범용 유한요소 프로그램인 ABAQUS를 이용하여 비교 검토하였다. 본 연구의 수치 해석결과 제시한 평면 및 공간 트러스의 비탄성 비선형 거동을 정확하고 효율적으로 예측 가능한 것으로 나타났다.

• 한국공간구조학회:학술대회논문집
• /
• 한국공간구조학회 2008년도 춘계 학술발표회 논문집
• /
• pp.19-24
• /
• 2008

본 논문은 풍동실험과 정적하중 실험을 실시하여 강풍 설계시 대공간 구조물의 막구조 동적응답을 확인하여 거스트 계수(gust factor)를 산출해 보고자한다. 이를 위해 섬유재료의 변형률에 따라 하중을 구할 수 있는 막재료 성능실험과 4가지(saddle형, wave형, arch형, point형) 막구조 모형에 따른 횡방향 동적하중과 동적변형응답을 측정할 수 있는 풍동실험, 동적변형응답에 따라 정적하중을 구할 수 있는 정적하중실험을 실시함으로써 거스트 계수(gust factor)를 산출하였다.

• Steel and Composite Structures
• /
• 제33권5호
• /
• pp.755-765
• /
• 2019

This study examined geometric and physical nonlinear analyses of beams and arches specifically from rolled profiles used in mining and underground constructions. These profiles possess the ability to create plastic hinges owing to their robustness. It was assumed that displacements in beams and arches fabricated from these profiles were comparable with the size of the structure. It also considered changes in the shape of a rod cross-section and the nonlinearities of the structure. The analyses were based on virtual unit moments, effective flexural rigidity of used open sections, and a secant method. The use of the approach led to a solution for the "after-critical" condition in which deformation increased with decreases in loads. The solution was derived for static determinate beams and static indeterminate arches. The results were compared with results obtained in other experimental tests and methods.

• 건축역사연구
• /
• 제32권1호
• /
• pp.7-20
• /
• 2023

The construction method of scaffolding structures is different from Mortise and Tenon and bucket arch structure of traditional large woodwork. It forms an independent construction system-fixing nodes with knots, a large number of diagonal braces are used to fix shelves and the structures mostly contain X-shape and triangular shape details. Simple ones include stalls, sheds, rain sheds, altars, lamp racks etc. But the scaffolding with larger scale and more complicated structure are modeled on archways, theatres and other buildings which are used in commercial and festival activities. At present, Macao, Hong Kong, Guangdong, Sichuan, Shanxi and other places in China have retained the custom of using scaffolding structures in important festival activities, but their uses, techniques and building types are slightly different from place to place. Due to building and demolishing at any time, the construction and service cycle is short. As a result, there are almost no physical objects left. We can only deduce the use and technical characteristics of ancient scaffolding skills through the colorful building styles that have been preserved with folk activities in various parts of China, the craftsmanship handed down from generation to generation by the scaffolding guild and artisans, and the description of cultural and historical materials and the mutual corroboration of visual materials.

• Steel and Composite Structures
• /
• 제18권6호
• /
• pp.1391-1404
• /
• 2015

A radially retractable roof structure based on the concept of the hybrid grid shell is proposed in this paper. The single-layer steel trusses of the radially foldable bar structure are diagonally stiffened by cables, which leads to a single-layer lattice shell with triangular mesh. Then comparison between the static behavior between the retractable hybrid grid shell and the corresponding foldable bar shell with quadrangular mesh is discussed. Moreover, the effects of different structural parameters, such as the rise-to-span ratio, the bar cross section area and the pre-stress of the cables, on the structural behaviors are investigated. The results show that prestressed cables can strengthen the foldable bar shell with quadrangular mesh. Higher structural stiffness is anticipated by introducing cables into the hybrid system. When the rise-span ratio is equal to 0.2, where the joint displacement reaches the minimal value, the structure shape of the hyrbid grid shell approaches the reasonable arch axis. The increase of the section of steel bars contributes a lot to the integrity stiffness of the structure. Increasing cable sections would enhance the structure stiffness, but it contributes little to axial forces in structural members. And the level of cable prestress has slight influence on the joint displacements and member forces.

• Restorative Dentistry and Endodontics
• /
• 제28권6호
• /
• pp.485-490
• /
• 2003

Complete understanding of the exterior and interior structure of the tooth would be prerequisite to the successful clinical results, especially in the restorative and endodontic treatment. Although three-dimensional reconstruction method using x-ray microtomography could not be used in clinical cases, it may be the best way to reconstruct the morphologic characteristics of the tooth structure in detail without destructing the tooth itself. This study was done to three dimensionally reconstruct every teeth in the arch in order to increase the understanding about the endodontic treatment and to promote the effective restorative treatment by upgrading the knowledge of the tooth morphology. After placing tooth between the microfocus x-ray tube and the image intensifier to obtain two-dimensional images of each level. scanning was done under the condition of 80 keV, $100{\;}\mu\textrm{m}$, 16.8 magnification with the spot size of $8{\;}\mu\textrm{m}$. Cross-section pixel size of $16.28{\;}\mu\textrm{m}$ and 48.83 cross-section to cross-section distance were also used. From the results of this study, precise three dimensional reconstructed images of every teeth could be obtained. Furthermore, it was possible to see image that showed interested area only, for example. enamel portion only, pulp and dentin area without enamel structure, pulp only, combination image of enamel and pulp, etc. It was also possible to see transparent image without some part of tooth structure. This image might be used as a guide when restoring and preparing the full and partial crown by showing the positional and morphological relationship between the pulp and the outer tooth structure. Another profit may be related with the fact that it would promote the understanding of the interior structure by making observation of the auto-rotating image of AVI file from the various direction possible.

• 한국지반공학회논문집
• /
• 제15권4호
• /
• pp.261-277
• /
• 1999

고랑형태로 좁게 굴착된 되메움 공간에 대한 수평 및 연직 토압은 굴착면과 되메움 흙과의 벽면마찰 및 고랑식 되메움공간의 형상에 따라 그 영향을 받는다. 본 연구에서는 대칭수직 굴착면에 대한 Handy의 제안식 및 대칭경사굴착면에 대한 Kellogg의 식을 수정하여 비대칭 굴착형상의 되메움 공간에 대한 수정식과 최소주응력아치 형태를 나타내어 보였다. 수정된 식은 모형토조 실험결과와 비교하였을 때 되메움 토압의 크기, 분포 등 그 경향이 매우 유사하였으며 비대칭으로 경사진 공간에서의 되메움 토압이 대칭적으로 수직하게 굴착된 공간에서의 토압보다 2배 이상의 큰 크기와 현저한 아칭현상의 저하를 보였다. 본 연구와 유사한 현장의 구조물에 미치는 토압을 산정할 때 되메움 공간의 형상 및 크기 등을 고려한 토압산정식이 적용되어져야 할 것으로 확인되었다.

• 한국지반신소재학회논문집
• /
• 제16권4호
• /
• pp.177-190
• /
• 2017

본 연구에서는 운영 중인 교량하부에 근접 시공되는 지하철 터널의 형식에 대한 비교분석 내용을 다루었다. 이를 위해 먼저 실제현장에 대해 상사비를 적용하여 각각의 터널 형식에 대한 터널 구조물 및 교량에 대해 축소 모형을 제작하고 시공과정을 모사하는 실험을 수행하였다. 실험결과는 사진 이미지 분석법인 PIV 기법과 LVDT에 의한 지반 거동 및 터널구조물의 변형률 등을 이용한 분석을 통해 각각의 터널 구조물 시공이 교량 말뚝 및 터널 주변 지반의 거동에 미치는 영향을 고찰하였다. 실험결과 파이프 추진 공법이 2-Arch 터널 시공법에 비해 주변지반에 미치는 영향 및 교량의 침하에 미치는 영향을 최소화할 수 있는 것으로 검토되었다. 아울러 PIV 기법은 터널시공 모사 실험과 같이 시공과정이 주변지반의 거동에 절대적인 영향을 미치는 조건에 대한 실험결과 분석에 매우 유용하게 적용될 수 있는 것으로 검토되었다.

• Clinics in Shoulder and Elbow
• /
• 제1권1호
• /
• pp.19-25
• /
• 1998

Appropriate clinical examination and imaging may lead to early diagnosis and treatment of the shoulder impingement syndrome, thus preventing progressing to a complete tear of rotator cuff. The impingement syndrome was caused by repeated entrapment and compression of supraspinatus tendon between the proximal end of humerus inferiorly, particullary its greater tuberosity. and one or m <)re component of coracoacromial arch superiorly. The purpose of this study is to critically, evaluate the result of twenty-five consecutive subacromial decompression with impingement syndrome and to assess the diagnostic accuracy of MR imaging by using oblique coronal and oblique sagittal plan. These patients were treated by arthroscopic subacromial decompression after their pains failed to improve with conservative therapy over three month. The average follow up was 25 month(range, 12 to 50). The mean age was 43 year old. The results were rated based on subjective response and the UCLA shoulder rating scale of the result. Ten patients(40%) were rated as excellent, 11patients(44%) were good. while four patients(16%) were fair. Radiologic evaluation suggested that the oblique sagittal plan of MRI can be helpful in evaluation of bony and soft-tissue structure of the coracoacromial arch and determining depth of bony resection. There were no infection or neurovascular injury. In reviewing our result, it appears that the arthroscopic subacromial decompression can be successful sugery for shoulder impingement syndrome and diagnostic accuracy of supplimentary oblique sagittal view of MRI was relatively higher than oblique coronal view alone for apprqpriate surgical plan.