Browse > Article
http://dx.doi.org/10.12989/scs.2015.18.6.1391

Static analysis of a radially retractable hybrid grid shell in the closed position  

Cai, Jianguo (Key Laboratory of C & PC Structures of Ministry of Education, National Prestress Engineering Research Center, Southeast University)
Jiang, Chao (Key Laboratory of C & PC Structures of Ministry of Education, National Prestress Engineering Research Center, Southeast University)
Deng, Xiaowei (Department of Structural Engineering, University of California)
Feng, Jian (Key Laboratory of C & PC Structures of Ministry of Education, National Prestress Engineering Research Center, Southeast University)
Xu, Yixiang (Department of Civil Engineering, Strathclyde University)
Publication Information
Steel and Composite Structures / v.18, no.6, 2015 , pp. 1391-1404 More about this Journal
Abstract
A radially retractable roof structure based on the concept of the hybrid grid shell is proposed in this paper. The single-layer steel trusses of the radially foldable bar structure are diagonally stiffened by cables, which leads to a single-layer lattice shell with triangular mesh. Then comparison between the static behavior between the retractable hybrid grid shell and the corresponding foldable bar shell with quadrangular mesh is discussed. Moreover, the effects of different structural parameters, such as the rise-to-span ratio, the bar cross section area and the pre-stress of the cables, on the structural behaviors are investigated. The results show that prestressed cables can strengthen the foldable bar shell with quadrangular mesh. Higher structural stiffness is anticipated by introducing cables into the hybrid system. When the rise-span ratio is equal to 0.2, where the joint displacement reaches the minimal value, the structure shape of the hyrbid grid shell approaches the reasonable arch axis. The increase of the section of steel bars contributes a lot to the integrity stiffness of the structure. Increasing cable sections would enhance the structure stiffness, but it contributes little to axial forces in structural members. And the level of cable prestress has slight influence on the joint displacements and member forces.
Keywords
hybrid structure; grid shell; retractable roof; foldable bar structure; static behavior;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Bulenda, T. and Knippers, J. (2001), "Stability of grid shells", Compos. Struct., 79(12), 1161-1174.   DOI   ScienceOn
2 Cai, J.G., Xu, Y.X., Wang, F., Feng, J. and Zhang, J. (2012), "A computational study of the static and dynamic response of a hybrid barrel vault structure", Adv. Steel Constr., 8(4), 317-330.
3 Cai, J.G., Xu, Y.X., Feng, J. and Zhang, J. (2013), "Design and analysis of a glass roof structure", Struct. Design Tall Spec. Build, 22(8), 677-686.   DOI
4 De Temmerman, N., Alegria Mira, L. and Vergauwen, A. (2012), "Feasibility of the Universal Scissor Component (USC): Building a full-scale deployable dome", J. Int. Assoc. Shell Spatial Struct., 53(4), 227-236.
5 El-Sheikh, A. (2001a), "Configurations of single-Layer barrel vaults", Adv. Struct. Eng., 4(2), 53-64.   DOI   ScienceOn
6 El-Sheikh, A. (2001b), "Performance of single-layer barrel vaults with different configurations", Int. J. Space Struct., 16(2), 111-123.   DOI   ScienceOn
7 Feng, R.Q., Ye, J.H. and Yao, B. (2012), "Evaluation of the buckling load of an elliptic paraboloid cable-braced grid shell using the continuum analogy", J. Eng. Mech., 138(12), 1468-1478.   DOI
8 Feng, R.Q., Yao, B. and Ye, J.H. (2013), "Stability of lamella cylinder cable-braced grid shells", J. Constr. Steel Res., 88, 220-230.   DOI   ScienceOn
9 Glymph, J., Shelden, D., Ceccato, C., Mussel, J. and Schober, H. (2004), "A parametric strategy for free-form glass structures using quadrilateral planar facets", Automation Constr., 13(2), 187-202.   DOI   ScienceOn
10 Hoberman, C. (1990), Reversibly Expandable Doubly-Curved Truss Structures, US Patent 4; 942, 700.
11 Hoberman, C. (1991), Radial Expansion Retraction Truss Structure, US Patent 5; 024, 031.
12 Hoberman, C. (1992), "Art and science of folding structures", Sites, 24, 61-69.
13 Hosozawa, O., Shimamura, K. and Mizutani, T. (1999), "The role of cables in large span spatial structures:Introduction of recent space structures with cables in Japan", Eng. Struct., 21(8), 795-804.   DOI
14 Ishii, K. (2000), Structural Design of Retractable Roof Structures, WIT Press, Southampton, Boston, MA, USA.
15 Teall, M.J. (1996), "Deployable roof structures", Masters Dissertation; University of Cambridge, UK.
16 Mao, D. and Luo, Y. (2008), "Analysis and design of a type of retractable roof structure", Adv. Struct. Eng., 11(4), 343-354.   DOI
17 Schlaich, J. and Schober, H. (1997), "Glass roof for the Hippo house at the Berlin zoo", Struct. Eng. Int., 7(4), 252-254.   DOI   ScienceOn
18 Shon, S.D., Lee, S.J. and Lee, K.G. (2013), "Characteristics of bifurcation and buckling load of space truss in consideration of initial imperfection and load mode", J. Zhejiang Univ.-Sci. A, 14(3), 206-218.   DOI
19 Van Mele, T., De Temmerman, N., De Laet, L. and Mollaert, M. (2010), "Scissor-hinged retractable membrane structures", Int. J. Struct. Eng., 1(3/4), 374-396.   DOI
20 You, Z. and Pellegrino, S. (1997), "Foldable bar structures", Int. J. Solids Struct., 34(15), 1825-1847.   DOI