• East Asian mathematical journal
• /
• 제26권1호
• /
• pp.69-73
• /
• 2010

We invoke the characterization of Pythagorean-hodograph polynomial curves and prove that it is impossible to parameterize any real curves, other than a straight line, by rational functions of its arc length.

• 한국농공학회논문집
• /
• 제53권2호
• /
• pp.19-26
• /
• 2011

SATEEC ArcView GIS system was developed using the Universal Soil Loss Equation (USLE) and sediment delivery ratio (SDR) modules. In addition, time-variant R and C modules and $R_5$ module were developed and integrated into the SATEEC system in recent years. The SATEEC ArcView GIS 2.1 system is a simple-to-use system which can estimate soil erosion and sediment yield spatially and temporarily using only USLE input data, DEM, and daily rainfall dataset. In this study, the SATEEC 2.1 system was used to evaluate the effects of USLE LS input data considering slope length segmentation on soil erosion and sediment yield estimation. Use of USLE LS with slope length segmentation due to roads in the watershed, soil erosion estimation decreased by 24.70 %. However, the estimated sediment yield using SATEEC GA-SDR matched measured sediment values in both scenarios (EI values of 0.650 and EI 0.651 w/o and w/flow segmentation). This is because the SATEEC GA-SDR module estimates lower SDR in case of greater soil erosion estimation (without flow length segmentation) and greater SDR in case of lower soil erosion estimation (with flow length segmentation). This indicates that the SATEEC soil erosion need to be estimated with care for accurate estimation of SDR at a watershed scale and for accurate evaluation of BMPs in the watershed.

• 한국의류학회지
• /
• 제29권5호
• /
• pp.737-744
• /
• 2005

This study was aimed to provide the measurement data and shape classification of the head of the Korean male children for the headwear sizing systems. Five hundred twenty male children, aged nine to twelve years, participated f3r this study. The 17 regions on the head and height, weight of the subjects were directly measured by the expert experimenters. Factor analysis, cluster analysis, GLM analysis and Tukey HSD test were performed using these data. Through factor analysis, low factors were extracted upon factor scores and those factors comprised $69.76\%$ for the total variances. Three clusters as their head shape were categorized using four factor scores by cluster analysis. Type 1 was characterized by the widest width and Bitragion arc, shortest head length. Type 2 had the longest head length and the widest side width and the highest head length and head circumference. Type 3 was characterized by the smallest head circumstance, head width and side width, and medium head length.

• 동의생리병리학회지
• /
• 제21권1호
• /
• pp.270-280
• /
• 2007

The objectives of study are to investigate the relationship between Sasang Constitution(四象醫學) and measuring items of the head and face and to develop useful diagnosis standard of Sasang Constitution. Subjects took QSCCII(Questionnaire for the Sasang Constitution Classification II) tests repeatedly at an interval of one year and were diagnosed as same constitutions. The 9 Items were measured by Martin-type anthropometric method in 112 subjects. Compared with measurements of 3 constitutions, the mean values in Taeeum-in(太陰人) showed highest and there were significant differences in 7 items between Taeeum-in(太陰人) and other constitutions. Especially, Measurements of Bitragus to Submandibular Arc Length(BSAL) item and Bitragus to Menton Arc Length(BMAL) item showed significant differences between Taeeum-in(太陰人) male and other constitutions male. It seems that BSAL and BMA items can differentiate Taeeum-in(太陰人) from other constitutions and these items have possibility to be a diagnosis standard of Sasang Constitution.

• 복합신소재구조학회 논문집
• /
• 제3권2호
• /
• pp.1-10
• /
• 2012

In the present study, an Element-Based Lagrangian Formulation for the nonlinear analysis of shell structures is presented. The strains, stresses and constitutive equations based on the natural co-ordinate have been used throughout the Element-Based Lagrangian Formulation of the present shell element which offers an advantage of easy implementation compared with the traditional Lagrangian Formulation. The Element-Based Lagrangian Formulation of a 9-node resultant-stress shell element is presented for the anisotropic composite material. The element is free of both membrane and shear locking behavior by using the assumed natural strain method such that the element performs very well in thin shell problems. The arc-length control method is used to trace complex equilibrium paths in thin shell applications. Numerical examples for laminated composite curved shells presented herein clearly show the validity of the present approach and the accuracy of the developed shell element.

• 전기학회논문지
• /
• 제59권5호
• /
• pp.897-903
• /
• 2010

This paper presents a response surface method(RSM) with Latin Hypercube Sampling strategy, which is employed to optimize a magnet pole shape of large scale BLDC motor to minimize the cogging torque. The proposed LHS algorithm consists of the multi-objective Pareto optimization and (1+1) evolution strategy. The algorithm is compared with the uniform sampling point method in view points of computing time and convergence. In order to verify the developed algorithm, a 6 MW BLDC motor is simulated with 4 design parameters (arc length and 3 variables for magnet) and 4 constraints for minimizing of the cogging torque. The optimization procedure has two stages; the fist is to optimize the arc length of the PM and the second is to optimize the magnet pole shape by using the proposed hybrid algorithm. At the 3rd iteration, an optimal point is obtained, and the cogging torque of the optimized shape is converged to about 14% of the initial one. It means that 3 iterations aregood enough to obtain the optimal design parameters in the program.

• 한국공간구조학회논문집
• /
• 제4권3호
• /
• pp.103-109
• /
• 2004

본 논문은 조합하중을 받는 공간구조물의 안정경계를 파악하는 것이다. 구조물에 작용하는 독립된 여러 가지 하중벡터는 기본이 되는 하중 모드와 하중매개 변수를 이용하여 나타내고, 독립된 하중 매개변수에는 비례관계를 설정함으로서 하나의 하중변수에 의해 하중을 부여한다. 구조물의 좌굴하중 즉 임계점은 평형조건이 불안정이 되는 극한점과 분기점으로 분류되고, 가장 낮은 하중이 좌굴하중으로 정의된다. 본 논문에서는 기하학적 비선형 문제를 해석하기 위한 수치해석법으로는 호장법과 뉴턴-랩슨법을 이용하였으며, 본 해석을 통하여 안정경계를 파악함은 물론 좌굴모드 및 좌굴하중을 명확히 규명하였다.

• Structural Engineering and Mechanics
• /
• 제18권6호
• /
• pp.807-829
• /
• 2004

The Element-Based Lagrangian Formulation of a 9-node resultant-stress shell element is presented for the isotropic and anisotropic composite material. The effect of the coupling term between the bending strain and displacement has been investigated in the warping problem. The strains, stresses and constitutive equations based on the natural co-ordinate have been used throughout the Element-Based Lagrangian Formulation of the present shell element which offers an advantage of easy implementation compared with the traditional Lagrangian Formulation. The element is free of both membrane and shear locking behavior by using the assumed natural strain method such that the element performs very well in thin shell problems. In composite plates and shells, the transverse shear stiffness is defined by an equilibrium approach instead of using the shear correction factor. The arc-length control method is used to trace complex equilibrium paths in thin shell applications. Several numerical analyses are presented and discussed in order to investigate the capabilities of the present shell element. The results showed very good agreement compared with well-established formulations in the literature.

• Journal of Welding and Joining
• /
• 제21권3호
• /
• pp.85-91
• /
• 2003

Narrow gap welding has many advantages over conventional V-grooved butt welding such as high productivity, small deformation and improved mechanical property of joints. With narrower groove gap, less arc heat input is expected will all the other advantages of narrow gap welding. The main defects of narrow gap welding include the lack of root fusion, convex bead surface and irregular surface, all of which have negative effects on the next welding pass. This paper suggests an up-and-down torch oscillation for ultra narrow gap welding with gap size of 5mm and investigates the proper welding conditions to fulfill the reliable and high welding quality. First, GMA welding model was suggested for ultra narrow gap welding system with Halmoy's model referenced for wire melting modeling. And the arc length in ultra narrow gap was defined. Secondly, based on the experimental results of up-and-down torch oscillation welding, phase shift of current and wire extension length were simulated for varying oscillation frequency to show that weld the bead shape in ultra narrow gap welding can be predicted. As the result, it was confirmed that reliable weld quality in ultra narrow gap welding can be achieved with up-and-down torch oscillation above 15Hz due to its ability to provide uniform heat input along the sidewall of gap.

• 패션비즈니스
• /
• 제11권6호
• /
• pp.24-34
• /
• 2007

This study aims to suggest basic data for the production of hats for aged women. The subjects were 151 females who are 60 years old or above and live in Busan. Their hat-wearing reality was inquired and their head parts were measured, which led to the following conclusion: 1. Results of Hat-Wearing Reality Inquiry 64.9% answered they are unsatisfied with the size system of the available hats at present, implying the necessity for improving the current dimension system. 92.7% responded hat dimensions need to be subdivided, while 97.4% were for the necessity of hat size system. 74.8% expressed their will to buy ordered hats because they can find the hats of right sizes and designs. 2. Results of Head-Part Measurement Experiments According to head-part measurement, head circumference A was 53.26cm, head circumference B 54.19cm, and head circumference C 57.69cm on the average. Cluster analysis revealed three types. Type 1 (24%) with small head length and circumference is the smallest head with a wide upper part. Type 2 (33%) has long head height, short bitragion arc A, and thick head breadth. Type 3 (43%), owing to big head circumference and length as well as high values in vertical items. Considering head circumference B (HCB) and bitragion arc A (BAA), a new hat size system of 3 sizes (HCB: BAA) was chosen: S (52cm: 29cm), M (53-55cm: 30cm), and L (56-57cm: 31cm).