• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.563-568
• /
• 1999

Generally the control method of wire feeding motor in welding machine has been used full-wave phase control method. The fire-angle control generates low frequency speed ripple, and it causes the output current ripple. So it results in the variation of welding condition and low welding performances such as spatter generation and bead state. For the purpose of welding performances improvement by speed controller in wire feeding motor, in this paper the constant speed control method for welding machine is proposed. The proposed system is composed of speed control loop and current control loop. As a result of experiment by using proposed constant wire feed experiment by using proposed constant wire feed speed controller, the output voltage and current waveform and metal transfer are maintained stably. And moreover the number of instantaneous short circuit occurrence is reduced remarkably.

• 유체기계공업학회:학술대회논문집
• /
• 2006.08a
• /
• pp.335-338
• /
• 2006

A Numerical study of the cavitation within a centrifugal pump is carried out using CFD commercial code, FLUENT. The objective of this study is to predict the onset of cavitation within the pump blade and the degradation in the pressure rise due to the generation and transport of vapor. A pump designed for the study is a six bladed, one-circular arc impeller design suggested by A.J. Stepanoff et al. The Steady-state calculations are performed for a wide range of flow rate without the cavitation to investigate the pump performance. The design head and efficiency show a very good agreement with the numerical results at the design flow rate. After the validation with the numerical results, the pump performance and the onset of cavitation within the blade is predicted by changing NPSH at the design flow rate.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.1
• /
• pp.33-39
• /
• 2007

One of the most important processes is the face milling in processing task. It makes the smooth surface of processed goods. In processing stage, the formation of burr is inevitable. The formed burr decreases a detailed drawing and effects the safety of workers. So, it causes a deburring process for removing and a bottle-neck condition. Therefore, the study which can minimize the generation of burr is needed. In this paper, complex feature, such as line, arc, circle, spline is studied more reality than any other papers. And also, the algorithm which can predict the path of generated burr is established. Moreover, the finality goal is that the system which can produce tool-path minimized has to be developed.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2003.05a
• /
• pp.381-385
• /
• 2003

We consider the bandwidth parking problem arising from telecommunication networks The problem is to determine the set of calls to be routed and an assignment or them to the paths in arc capacitated network. The objective is to maximize profit. We formulate the problem as an integer programming and propose an algorithm to solve it. Column generation technique to solve the linear programming relxation is proposed with two types of columns in addition, to obtain an optimum integer solution, we consider a new branching strategy. Computational experiments show that the algorithm gives option at solutions within reasonably small time limits.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2003.04a
• /
• pp.623-628
• /
• 2003

현재 정부는 다양한 행정서비스를 온라인화하는 전자정부 구현을 위해 여러 분야에서 관련 사업들을 진행 중에 있다. 수자원 분야에서는 하천관련 업무의 전산화 사업의 일환으로 하천지도전산화 사업을 진행 중에 있으며, 그 결과로 구축된 각종 DB를 종합적으로 활용하기 위한 다양한 분야의 하천주제도 구축이 요구되는 실정이다. 본 연구에서는 기 구축 DB를 효율적으로 활용하여, 보다 생산성 있는 하천주제도를 효율적으로 구축하기 위해 하천공간정보 데이터 모델을 설계하였다. 본 모델은 하천정보의 통합처리를 위해 미국의 USGS에서 사용하고 있는 ArcGIS Hydro Data Model을 기반으로 하였다. 이렇게 설계된 하천공간정보 데이터 모델은 다양한 하천주제도의 효율적 구축 방안을 제공할 수 있을 것으로 사료된다.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.498-506
• /
• 2010

The neutral section was installed in order to prevent conflict with different phase angle source in electric railway catenary system. The speed of electric train reduced due to coasting operation by notch off when it passed the neutral section. And, the catenary wire was damaged and the accident might be happened because of the arc generation when the electric train passed the neutral section with notch on condition. This project has a goal to develop the automatic changeover system using by noncontactless semiconductor device in neutral section of catenary system so that the train pass as notch-on condition. In this first year, we obtain as following results such as domestic and international systems applications and completion requirements, development and analysis of stability for automatic changeover system, design of static switching device on automatic changeover system in neutral section and drawing up interface design and specifications according to equipment.

• Proceedings of the Korean Society of Toxicology Conference
• /
• 2002.05a
• /
• pp.68-68
• /
• 2002

To investigate the disease and recovery process of pneumoconiosis induced by welding-fume exposure, a lung fibrosis model was established by building a stainless steel arc welding fume generation system and exposing male Sprague-Dawley rats for 90 days.(omitted)

• Journal of Industrial Technology
• /
• v.19
• /
• pp.179-187
• /
• 1999

The computer pattern sewing machine is an automatic sewing machine that is controlled by an input pattern. Even a novice can run this machine for various tasks fast and reliably such as sewing a button, a belt ring and an airbag, etc. The pattern processing software, which is the main software of this machine, is for editing and modifying pattern data by online teaching or off-line editing, setting up parameters, and calculate a moving distance of working area on the x-y axes. In this paper we propose an algorithm to generate pattern data for sewing by simplifying image data. The pattern data are composed of outline data like dot, line, circle, arc, curve, etc. We need converting this data into sewing data which involve sewing parameter, moving distance of working are an the x-y axes, thread, spindle speed.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1999.10a
• /
• pp.22-26
• /
• 1999

In general, three are many degrees of freedom (DOF) in industrial robots. That can generate several special end-effector's positions and orientations. For that reason, industrial robots are used in a wide scope of industrial applications such as welding, spray painting, deburring, and so on. In this research, new method is presented which safely maintain the desired constant end-effector's orientation and minimize the numbers of segments in path. These algorithms may apply to welding, painting, and assembling. The simulation study of straight line and circular motions in arc-welding operations is carried out to show the sure proof of these algorithms.

• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.464-469
• /
• 1998

In the conventional wire feeder drives of welding machine, one thyristor or MOSFET device was used for half-wave phase control circuit and direct EMF measurement was used for sensing the wire feed rate. But the method using one switching device has poor response for sudden disturbance and it has latent speed ripple. It can affect some welding performance such as spatter generation and irregular bead formming. Therefore, the welding performance using full-bridge PWM speed control scheme was compared with conventional driving scheme was compared with conventional driving scheme and experimented in this paper. The results of experiment confirm the posibility of welding performance improvement by proposed constant speed control scheme in wire feeding drive of welding machine.