• Journal of the Korean Society of Radiology
• /
• v.16 no.1
• /
• pp.15-23
• /
• 2022

3D printing technology is being used in various fields such as medicine and biotechnology, and materials containing metal powder are being commercialized through recent material development. Therefore, this study intends to analyze the photon spectrum during added filtration using 3D printing material during diagnostic X-ray examination through simulation. Among the Monte Carlo techniques, MCNPX (ver. 2.5.0) was used. First, the appropriateness of the photon spectrum generated in the simulation was evaluated through SRS-78 and SpekCalc, which are X-ray spectrum generation programs in the diagnostic field. Second, photon spectrum the same thickness of Al and Cu filters were obtained for characterization of 3D printing materials containing metal powder. In addition, the total photon fluence and average energy according to changes in tube voltage were compared and analyzed. As a result, it was analyzed that PLA-Al required about 1.2 ~ 1.4 times the thickness of the existing Al filter, and PLA-Cu required about 1.4 ~ 1.7 times the thickness of the Cu filter to show the same degree of filtration. Based on this study in the future, it is judged that it can be utilized as basic data for manufacturing 3D printing additional filters in medical fields.

• The Mathematical Education
• /
• v.61 no.3
• /
• pp.457-476
• /
• 2022

Mathematics textbooks as the main resources to support mathematical teaching and learning are used importantly in Korean lessons. Although the scope of mathematics textbook research has been expanded and the research has increased, few studies have analyzed the overall trends of mathematics textbook research in Korea. This study analyzes the overall trends of textbook research on 418 papers pertinent to mathematics textbooks published in domestic mathematics education journals. The results of this study showed that the proportion of textbook analysis research was the highest, followed by textbook use and textbook development research in order. There were more textbook studies at the elementary school level than at the middle or high school levels. Regarding textbook analysis studies, the most frequent topic was to analyze how specific mathematical concepts were presented in textbooks. Regarding textbook use studies, many studies asked both teachers and students to review the appropriateness of textbooks under development or analyzed the perception and use of specific activities of textbooks based on a survey. Regarding textbook development studies, the most popular topics included the directions and examples of new development, such as storytelling-based or electronic textbooks. This paper finally presented implications for textbook research in light of the domestic mathematics education context and the international mathematics textbook research trends.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.5
• /
• pp.409-421
• /
• 2022

The purpose of this study is to understand the flow of personnel management in the Joseon Dynasty through Dasan Jeong Yak-yong's Mokminsimseo, and to understand how it is being used not only in modern administrative organizations but also in social welfare organizations. As a result, first, first, among the human resource management areas of the Joseon Dynasty, the area occupied the most was related to integrity. These are the contents that are widely used in evaluation methods and scope, value standards, and use of evaluation today. Second, regarding the recruitment and recruitment of talents in the Joseon Dynasty, various methods were presented to enhance the appropriateness, fairness of hiring, and the effectiveness of hiring human resources. This has significant implications even today as it specifically mentions the appropriate appointment and scale of human resources, emphasizing that personnel is everything. Finally, This is different from the human resource management of the Joseon Dynasty in that it is being converted to a compensation paradigm rather than discipline as a way to inspire the motivation of workers today and increase work efficiency. In addition, professionalism was emphasized in the education and training of public officials, and the maintenance of dignity and leadership in body and mind is emphasized, showing that even today, the virtues required of workers in public organizations, including social welfare organizations, are being maintained.

• Journal of the Korean GEO-environmental Society
• /
• v.24 no.10
• /
• pp.5-13
• /
• 2023

With the recent increase in development projects centered on urban areas, the construction of building structures is increasing in areas adjacent to the urban railway operation section. In this case, since ground vibration is generated by the train in operation and affects the adjacent structure, the building structure needs appropriate vibration reduction against train vibration generated at the adjacent location from the desing phase. However, the vibration levels calculated vary depending on the train vibration evaluation method, which means that the implementation of vibration reduction may vary depending on the train vibration evaluation method. Therefore, this study calculated the vibration level according to ground conditions, tunnel depth and separation distance between vibration sources and adjacent structures using numerical analysis and train vibration evaluation methods, and compared them to designning phase. And the appropriate separation distance between the tunnel and the adjacent structure was evaluated by comparing the vibration level with the allowable standards. As a result of the study, the Ungar and Bender evaluation method is evaluated as the most appropriate among the train vibration evaluation methods, and the appropriate separation distance between the tunnel and the adjacent structure is evaluated to be more than 4.5D.

• Journal of Aerospace System Engineering
• /
• v.16 no.1
• /
• pp.104-109
• /
• 2022

The bomb rack unit (BRU) installed inside the pylon serves to fix external attachments such as external fuel tank or external weapon, and also serves to separate external attachments in case of emergency. In particular, the load generated when the external attachment is separated from the BRU is called the punching load. In this study, we present the results of a structural static test performed to verify the structural integrity of the pylon under the BRU punching condition acting on it. In the structural static test report, we present the implementation method for the separation load of the external attachment and the test profile for the BRU punching load condition, and compared the error between the load input signal and the feed-back signal to determine the appropriateness of load control in each test. Furthermore, we compared the strain results obtained in the numerical analysis and structural test at the main positions of the specimen. As a result, it was shown that the load of the actuators were properly controlled within the allowable error range in each test, and the numerical analysis effectively predicted the test result. Finally, through structural static tests conducted by design limit load and design ultimate load, we verified that the aircraft pylon dealt with in this study has sufficient structural strength for external attachment separation condition.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.11 no.2
• /
• pp.131-140
• /
• 2009

It has been repeatedly reported that a drainage system of a drained tunnel is deteriorated. And consequently the water pressure on the lining increases with time. However, little research on the watertight tunnel was found in the literatures. According to field measurements, leakage of the undrained tunnel has increased with time, which is completely opposite to the behavior of the drained tunnel. It is evident that the hydraulic deterioration of the tunnel lining changes the water pressure on the lining and the amount of leakage, thus the design coneept in terms of groundwater is not maintained tightly throughout the life time of the tunnel. The Segment lining is generally constructed as watertight. However, it is frequently reported that the leakage in the segment tunnel increases with time. It is also reported that the leakage is generally concentrated at the joints of the segments. In this study structural and hydraulic interaetion of the segment lining due to the hydraulic deterioration of the segments and the joints is investigated using the numerical modeling method. An electric utility tunnel below groundwater table is considered for the analyses. The effects of hydraulic deterioration of the segment lining are identified in terms of ground loading, water pressure and lining behavior. A remedial grouting measure for leakage is also numerically simulated, and its appropriateness is evaluated.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.6D
• /
• pp.839-847
• /
• 2008

No proper system exists for private investment projects, and efficient project management is not being achieved due to entanglements of management. Recognizing these circumstances, this paper has diagnosed the hard facts that project management organizations and systems are facing, and presented solutions to the factors that are obstructing the establishment of efficient project management system. This paper carried out focus group interviews on the experts who had participated in the Incheon International Airport Railway construction project, using the methodology of an exploratory case study. The results were systematically analyzed according to organizational behavior and causes corresponding to each of the problems were deduced. Private investment projects were divided into task environments and project organizations based on social science methodology and analyzed, and a final improvement plan for each participating organization was presented. An improvement plan was presented, and it was compared with the case study of Incheon bridge construction project, which is recognized as a model of successful project management, and its appropriateness evaluated.

• Journal of the Economic Geographical Society of Korea
• /
• v.26 no.2
• /
• pp.96-109
• /
• 2023

Recently, there has been a lot of discussion about the regional pricing of electricity and electricity self-sufficiency. In Korea, power generation facilities are highly ubiquitous and there is an imbalance between electricity production and consumption regions. So it is proposed to charge different price by region, instead of the current nationwide uniform price, and the regional electricity self-sufficiency rate is proposed as a criterion for identifying electricity production and consumption regions. However, many discussions set the spatial unit for measuring electricity self-sufficiency by 17 Si·Do, which needs to be analyzed for its appropriateness. In this study, we analyzed the electricity self-sufficiency rate using 17 provinces and 229 Si·Gun·Gu as the spatial unit. As a result of the analysis, there are 7 and 10 electricity producing and consuming regions at Si·Do level, but 38 and 191 at Si·Gun·Gu level. In addition, although the electricity self-sufficiency rate measurement has the advantage of identifying electricity production and consumption areas in a simple and intuitive way, we points out that it has some problems with the criteria for regional pricing of electricity.

• Journal of Korea Port Economic Association
• /
• v.39 no.3
• /
• pp.123-140
• /
• 2023

Maritime transportation is one of the oldest means of transportation utilized by mankind, and it has significantly contributed to the advancement of civilization by efficiently transporting bulk cargo at a low cost. The study aim to identify the factors influencing the selection of shipping companies in the bulk shipping market and provide insights for improving the competitiveness of shipping-related companies. To achieve this goal, the Analytic Hierarchy Process (AHP) was employed. For the empirical analysis, previous research, interviews, and a pilot test were conducted to identify five top-level factors such as companies, vessels, operations, services, and transaction factors. Each top-level factor has four sub-factors. The results of the analysis, based on 80 valid questionnaires, are as follows: Firstly, in the selection of shipping companies, the priority of factors influencing the choice of shipping companies was as follows: vessel factors were the most important, followed by company, operations, relationship, and service factors. Secondly, when investigating the priority of sub-factors, the availability/appropriateness of vessels was the most crucial factor, followed by company characteristics, financial soundness, and the company's reputation in order. The implications of these findings suggest that shipowners should focus on securing more suitable vessels and enhancing their reputation in response to shippers' demand. Shippers, on the other hand, should consider maintaining a healthy financial structure as a crucial task in securing competitive shipping service providers.

• KIPS Transactions on Computer and Communication Systems
• /
• v.12 no.10
• /
• pp.291-298
• /
• 2023

In this paper, we study whether the programming questions of the Informatics·Computer recruitment tests were suitable for selecting teachers with required programming skills. The average points of the programming questions constituted 38%(20.8 points) of the total scores for the entire curriculum based on the results from analyzing the previous questions in the past 5 years. Moreover, the distribution of points for each evaluation criteria within programming and data structure, two exam subjects which have a high proportion of programming questions, demonstrated a large deviation ranging from 0% to 47% and 0% to 53% respectively. In this study, a questionnaire survey was conducted on 31 teachers to examine if the previous programming questions were suitable for measuring teachers' competency in programming abilities required in the actual teaching experience. Computational thinking ability was ranked the highest at 58% in response to the area that needs to be evaluated in the recruitment test. In response to the relevance of previous questions, problem solving ability was ranked the highest at 2.84 on a 5-point scale, but the overall appropriateness was deemed low. C language and Python were regarded as the computer languages suitable to be tested for programming questions with each ranked 55% and 45%. The finding confirms that teachers preferred Python and the incumbent C language to others. Based on the results of the questionnaire, we recommend changes in the programming questions to improve the selection criteria.