• 정보처리학회논문지D
• /
• 제15D권1호
• /
• pp.23-30
• /
• 2008

유비쿼터스 환경에서 상황정보 인식 분야를 연구하면서 가장 밑바탕에서 기초가 될 수 있는 것은 인터넷 기술과 XML(Extensible Markup Language)이다. 인터넷을 통한 통신에서 XML 데이터의 사용이 일반화되고 있으며 데이터의 형태는 연속적이다. 그리고 XML 스트림 데이터에 대한 질의를 처리하기 위한 방안들이 제시되고 있다. 이 논문에서는 스트림 데이터에 대한 질의처리를 효율적으로 수행하기 위한 기반연구로써 XML을 레이블의 순서화된 트리로 모델링하여 온라인 환경에서 빈발한 구조를 추출하는 마이닝 방법을 제안한다. 즉, 지속적으로 입력되는 XML 데이터의 구조를 트리로 모델링하고 각각의 트리를 하나의 트리 집합의 구조로 표현하여 현재 윈도우 시점에서 빈발한 구조를 정확하고 빠르게 추출하는 방법을 제시한다. 제시하는 방법은 XML의 질의 처리 및 색인 구성의 기초 자료로 활용될 수 있다.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2002년도 춘계학술발표논문집 (하)
• /
• pp.1483-1486
• /
• 2002

Multicast protocols are efficient methods of group communication, but they do not support the various transmission protocol services like a reliability guarantee, FTP, or Telnet that TCPs do. The purpose of this dissertation is to find a method to utilize sewer routers to form multicasts that can simultaneously transport multicast packets and TCP packets. For multicast network scalability and error recovery the existing SRM method has been used. Three packets per TCP transmission control window size are used for transport and an ACK is used for flow control. A CBR and a SRM is used for UDP traffic control. Divided on whether a UDP multicast packet and TCP unicast packet is used simultaneously or only a UDP multicast packet transport is used, the multicast receiver with the longest delay is measured on the number of packets and its data receiving rate. It can be seen that the UDP packet and the TCP's IP packet can be simultaneously used in a server router.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.151-151
• /
• 2010

In this paper, the electrically properties of nonvolatile memory (NVM) using multi-stacks gate insulators of oxide-nitride-oxynitride (ONOn) and active layer of the low temperature polycrystalline silicon (LTPS) were investigated. From hydrogenated amorphous silicon (a-Si:H), the LTPS thin films with high crystalline fraction of 96% and low surface's roughness of 1.28 nm were fabricated by the metal induced crystallization (MIC) with annealing conditions of $650^{\circ}C$ for 5 hours on glass substrates. The LTPS thin film transistor (TFT) or the NVM obtains a field effect mobility of ($\mu_{FE}$) $10\;cm^2/V{\cdot}s$, threshold voltage ($V_{TH}$) of -3.5V. The results demonstrated that the NVM has a memory window of 1.6 V with a programming and erasing (P/E) voltage of -14 V and 14 V in 1 ms. Moreover, retention properties of the memory was determined exceed 80% after 10 years. Therefore, the LTPS fabricated by the MIC became a potential material for NVM application which employed for the system integration of the panel display.

• 근관절건강학회지
• /
• 제14권2호
• /
• pp.169-180
• /
• 2007

Purpose: This study was done to determine the effect of Tai-Chi Self-help program to progress of reduction of symptom, difficulty on activity by application Tai-Chi Self-help program for Fibromyalgia patients. Method: The study was used the method of one group pretest-posttest design. The subjects were 65 outpatients who were diagnosed as Fibromyalgia by ACR(1990) standard at K University Hospital, medical center. Tai-Chi self-help program was done for 8 weeks(three a week for 2 hours)through group meeting of 65 patients. Collected data were analyzed by SPSS for window12.0 program package. Results: The result of this study suggests that could increase in reduction of symptom and lower disturbance in ADL and life Satisfaction compared with the before Tai-Chi Self-help program education. Conclusion: Accoradingly Tai-Chi Self-help program could be used as a proper nursing strategy for Fibromyalgia patients.

• 한국레이저가공학회지
• /
• 제18권1호
• /
• pp.1-6
• /
• 2015

High welding speed and narrow weld seam are favorable for welding of magnesium alloy. Magnesium alloy is recommended for the smart frame because it has several advantages such as low density, high thermal conductivity, EMI shielding capability and good cast ability. This study is for the assembly welding of the magnesium smart frame with high productivity, good performance and low cost. The window for battery on AZ91D frame produced by die-casting was prepared by CNC machining. Corresponding AZ31 blank of 0.2mm thickness was prepared by die-blanking cut. All system set was fixed at the stationary bed but the laser beam was manipulated by scanner up-to 1,000mm/s speed. The weld joint between AZ31 sheet and AZ91D frame was welded by fiber laser on 850~1,000W output power. The joint showed penetration enough but some humping bead. The distortion by the weld heat was almost free because of the quick dissipation of the heat by small beam size and fast welding. Consequently, the thinner magnesium foil was assembled successfully to the magnesium frame of mobile phone.

• Smart Structures and Systems
• /
• 제24권4호
• /
• pp.427-434
• /
• 2019

This study investigates the structural integrity of the amphibious tour bus under the rollover condition. The multi-purpose bus called Dual Mode Tour Bus (DMTB) which explores on land and water has been designed on top of a truck platform. Prior to the fabrication of new upper body and sailing equipment of DMTB, computational analysis investigates the rollover protection of the proposed structure including superstructure, wheels, and axles. The Computer-Aided Design (CAD) of the whole vehicle model is meshed and preprocessed under high performance using the Altair HyperMesh to attain the best mesh model suited for finite element analysis (FEA) on the proposed system. Meanwhile, the numerical model is analyzed by employing LS-DYNA to evaluate the superstructure strength. The numerical model includes detail information about the microstructure and considers wheels and axles as rigid bodies but excludes window glasses, seats, and interior parts. Based on the simulation analysis and proper modifications especially on the rear portion of the bus, the local stiffness significantly increased. The vehicle is rotated to the contact point on the ground based on the mathematical method presented in this study to save computational cost. The results show that the proposed method of rollover analysis is highly significant not only in bus rollover tests but in crashworthiness studies for other application. The critical impartments in our suggested dual-purpose bus accepted and passed "Economic Commission for Europe (ECE) R66".

• 한국광학회지
• /
• 제3권1호
• /
• pp.67-72
• /
• 1992

7년전 두 개의 그룹에 의해 강한 증폭된 자발 방출이 200.angs. 영역에서 관찰된 이래, 증폭도의 증가와 작동 파장영역의 확장등에서 세계적으로 많은 X-선 레이저 연구가 이루어져 왔다. X-선 레이저의 개발은 살아있는 생체조직을 고분해능으로 관찰할 수 있는 X-선 현미경 기술, 세포의 3차원 상을 가능케 하는 X-선 홀로그래피 기술, 고밀도 플라즈마의 진단 등의 여러 분야에 응용될 것이다. 국내에서도 기초적인 X-선 레이저 개발에 대한 연구가 과학기술원과 포항공과대학에서 시작되고 있어 곧 고무적인 연구결과가 나올 것으로 기대된다.

• 열처리공학회지
• /
• 제32권4호
• /
• pp.155-160
• /
• 2019

Diamond Like Carbon (DLC) is a metastable form of amorphous carbon that have superior material properties such as high mechanical hardness, chemical inertness, abrasion resistance, and biocompatibility. Furthermore, its material properties can be tuned by additional doping such as nitrogen or boron. However, either pure DLC or doped DLC show poor adhesion property that makes it difficult to apply contact processing technique. Therefore we propose ultrafast laser micromachining which is non-contact precision process without mechanical degradation. In this study, we developed precision machining process of DLC thin film using an ultrafast laser by investigating the process window in terms of laser fluence and laser wavelength. We have also demonstrated various patterns on the film without generating any microcracks and debris.

• 한국인공지능학회지
• /
• 제8권2호
• /
• pp.1-5
• /
• 2020

Children's home accidents are less common than in the past. However, safety accidents continue to occur due to carelessness of the parents. To solve the problem, there are fall prevention screens that can withstand the weight of children, and safety railings that can be adjusted directly to solve the problem. However, these have disadvantages such as stability, convenience, and damage to the landscape. In this paper, we developed an automatic safety accident prevention fence system that can be installed on a window using Arduino, eliminating the disadvantages of previous safety accident prevention products. This system measures the height of a person standing in front of the fence and the distance between the person and the fence with two infrared sensors and moves automatically using a motor. In addition, in accordance with the U-Healthcare society, users can check the temperature, humidity, and fine dust concentration of the external environment through mobile. Each information can be obtained through DHT 11 sensor, fine dust concentration sensor, and Bluetooth connected toArduino. These can help the user's health care.

• 실천공학교육논문지
• /
• 제15권1호
• /
• pp.133-142
• /
• 2023

본 연구는 블록체인 기술이 현재 각 영역에서 어떻게 적용되고 있는지와 함께 그 블록체인을 구성하는 방법과 한계를 살펴보고, 이어 블록체인 기술이 제시하는 미래의 모습을 가늠해 보는 것을 목적으로 한다. 이 같은 블록체인 기술이 함축하고 있는 지향은 일정 부분 기술적 난제를 얼마나 빨리 극복하느냐에서 그 성공적 적용이나 실현 여부가 결정된다. 이 논문에서는 블록체인 기술의 진보를 기반으로 투명성과 신뢰성이 향상될 때, 산업의 영역뿐만 아닌, 경제나 정치적 영역에서 세상을 바꾸는 주요한 힘으로 작용하게 될 것이라는 점에 주목한다. 설사 블록체인 기술이 보여주는 문제의식이 현실의 문제를 해결하는 가장 효율적인 최선의 길이 될 수 없다고 하더라도, 이것이 제시하는 틀은 우리가 대면한 현실의 문제를 이해하는 주요한 창이 되어줄 것이다.