• Korean Journal of Soil Science and Fertilizer
• /
• v.50 no.1
• /
• pp.31-39
• /
• 2017

The effects of application of gypsum and fresh cattle manure on the yield of forage crop were investigated in Hwaong reclaimed land in Korea for 3 years from 2011 to 2013. This study was conducted to develop the practical application method of livestock manure as a fertilization source and a soil physico-chemical ameliorator for the cultivation of forage crop $Sorghum{\times}Sudangrass$ hybrid in newly reclaimed tidal land soil. Treatments with six applications were established with three replications; chemical fertilizer (CF), gypsum (G) $20Mg\;ha^{-1}$, G+fresh cattle manure (FCM) 100%, G+FCM 200%, G+FCM 300% and FCM 100% which referred to the application rate equivalent to the recommended amount of phosphate fertilization by soil test. The combined treatments of G+FCM increased soil organic matter, $Av.P_2O_5$ and exchangeable $Ca^{2+}$ contents while decreased exchangeable $Na^+$ and $Mg^{2+}$. The soil bulk density, soil hardness and soil aggregate formation were improved by G+FCM treatments. The dry matter yields of $Sorghum{\times}Sudangrass$ hybrid were significantly increased in proportion to the application rate of FCM. The phosphorus use efficiency showed the highest in the application level of G+FCM 100%, which seemed to be the results of reduced nutrient use efficiency by nutrient immobilization, leaching etc. when applied excessive amount of fresh animal manure.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.36 no.2
• /
• pp.107-111
• /
• 1991

This study was conducted to define the effect of 2, 4-D foliar application on the plant growth. photosynthesis ability and ethylene gas production of the ginseng plant. Neither abnomal foliar changes occured nor any inhibition in the leaf and stem growth was resulted for the plants treated with 2,4-D concentrated three times of the recommended dosage. The angle of petiole to the stem became wider by 2, 4-D foliar application. The higher concentration treatment of 2,4-D made the petiole angle significantly wider. Foliar application of the herbicide 2,4-D inhibited photosynthesis of the ginseng leaf. The inhibition rate of photosynthesis was significantly increased with the application concentration of 2, 4-D. Inhibition in photosyn-thesis ability by 2,4-D application with doubled concentration was recovered in three days after treatment. When 2,4-D was treated with a concentration tripled the recommended dosage, 12 days were needed to recover the photosynthesis ability of the ginseng leaf. Ethylene gas was not detected from the ginseng plants treated with 2 times concentrated 2, 4-D. However, the ginseng plants produced 0.03-0.04 ppm ethylene gas when the application rate was increased 3 times. The amount of ethylene gas produced by ginseng plant treated with 3 times concentrated 2, 4-D was only 1/20 compared with the amount produced by the soybean plant treated with the recommended dosage of 2, 4-D.

• Korean Journal of Organic Agriculture
• /
• v.6 no.1
• /
• pp.99-108
• /
• 1997

The aim of this experiment was to investigate the effect of applying times of cattle slurry on dry matter yield of Orchardgrass, when cattle slurry applied at rates of 30m3(average mineral nitrogen fertilizer equivalent to 120kg) per ㏊ in different dressing times, such as S1(1st and 2nd growth), S2(1st and 3rd growth), S3(1st and 4th growth), S4(2nd and 3rd growth), S5(2nd and 4th growth) and S6(application for 3rd and 4th growth). The results were as follows. 1. The average annual yields of dry matter were produced 6.36~7.42 ton per ㏊ in 1995~1997 when cattle slurry applied at rates of 30m3(average mineral nitrogen fertilizer equivalent to 120kg) per ㏊ in different dressing times, especially these tendency were shown higher annual dry matter in S4 plot9application for 2nd and 3rd growth). Those were higher 2.48~3.54 tons or 1.22~2.28 tons per ㏊ than the yields from non-fertilizing or phosphrous and potassium fertilizing. 2. Relative yields of annual dry matter in cattle slurry application plots were 164(S2 plot)~191(S4 plot)% in comparing with non-fertilizing plot. 3. Dry matter yields according to cutting frequency were highest at the 2nd cut(1.50 ton) and were in the order 3rd cut(0.95 ton)>4th cut(0.75 ton)>1st cut(0.69 ton/㏊). Also, those of cattle slurry application plot per ㏊ were in the order 2nd cut(2.02~2.73 tons)>3rd cut(1.56~2.08 tons)>4th cut(1.07~1.68 tons)>1st cut(1.11~1.45 tons/㏊). 4. Relative yields of annual dry matter in cattle slurry application plots were 164~219, 161~210, 143~212 and 135~182% at the 3rd, 1st, 4th and 2nd cut, respectively in comparing with non-fertilizing plot. 5. The efficiencies of nitrogen on dry matter yield(kg DM/kg N) were 18.1, 21.3 and 34.5kg DM/kg N when cattle slurry applied to Orchardgrass at rates of 30m3 (average mineral fertilizer equivalent to 120 kg) per ㏊ in 1993, 1994 and 1995, respectively, especially these tendency were shown higher efficiencies in S4 plot(application for 2nd 3rd growth). On the other hand, those of the same level fertilization of mineral nitrogen were 43.8, 19.2 and 13.4 kg DM/kg N in 1993, 1994 and 1995, respectively.

• Journal of the Korean Chemical Society
• /
• v.29 no.2
• /
• pp.137-143
• /
• 1985

Construction of a liquid membrane type of cupric ion selective electrode and its application to the potentiometric titration have been studied. A liquid ion-exchange membrance was prepared by extracting Cu(II) in aqueous solution into 1-(2-pyridylazo)-2-naphthol/nitrobenzene. A Ag/AgCl internal reference electrode was dipped into the aqueous reference solution of $1.00 {\times} 10^{-3}M\;Cu(NO_3)_2$ buffered with HAc-NaAc buffer solution, which was in contact with the nitrobenzene extract. The electrode showed the nernstian response to Cu(II) in the concentration range from $1.00{\times} 10^{-6}$ to $1.00{\times} 10^{-3}$M. The most suitable ion-exchanger concentration in the liquid membrane was $1.00{\times} 10^{-4}$M. The selectivity coefficients of the electrode for the various metal cations were investigated. The electrode was applied to the potentiometric titration of Cu(II) with EDTA.

• Journal of Navigation and Port Research
• /
• v.35 no.8
• /
• pp.643-647
• /
• 2011

In this paper, we study the application of DSSS(Direct Sequence Spread Spectrum) in underwater acoustic communication for robust the ISI(Inter-Symbol Interference. We confirm the application of DSSS in underwater acoustic communication in underwater by the simulation with underwater channel impulse response and experiment. As a simulation result, the BER of QPSK technique is $1.14{\times}10^{-1}$ and the BER of DSSS technique is $6.73{\times}10^{-3}$. And we performed the experiment of DSSS technique in underwater. As a experiment result, the BER of QPSK technique is $3.19{\times}10^{-1}$ and the BER of DSSS technique is $5.17{\times}10^{-4}$.

• Environmental Engineering Research
• /
• v.17 no.1
• /
• pp.35-39
• /
• 2012

In this study, multiparametric flow cytometry (FCM) was installed to enumerate the diagnosis of Pseudomonas aeruginosa ATCC 10145 and Escherichia coli K12 (IFO 3301). The nucleic acids (DNA/RNA) were double stained by a LIVE/DEAD bacLight viability kit, involving green SYTO 9 and red propidium iodide (PI), based on the permeability of two chemicals according to the integrity of plasma membrane. As the results showed, the gate for dead bacteria was defined as the range of $0.2{\times}10^0$ to $6.0{\times}10^1$ photo multiplier tube (PMT) 2 fluorescence (X-axis) and $2.0{\times}10^0$ to $2.0{\times}10^2$ PMT 4 fluorescence (Y-axis), and the gate for live bacteria was defined as the range of $6.0{\times}10^0$ to $6.0{\times}10^2$ PMT 2 fluorescence (X-axis) and $2.0{\times}10^0$ to $4.0{\times}10^2$ PMT 4 fluorescence (Y-axis). In the comparison of the number of the tested bacteria detected by FCM (viability assessment) and plate culture (cultivability assessment), the number of bacteria detected by FCM well represented the number of bacteria that was detected by the colony forming unit (CFU) counting method when bacteria were exposed to isopropyl alcohol and silver/copper cations. Consequently, it is concluded that the application of FCM to monitor the functional effect of disinfectants on the physiological status of target bacteria can offer more rapid and reliable data than the plate culture colony counting method.

• Membrane Journal
• /
• v.9 no.1
• /
• pp.36-42
• /
• 1999

Permeation behavior of the semiconductor rinsing wastewater contammg Si particles was examined by ultrafiltration using the polyolefin tubular membrane. Flux decline with time was due to the growth of Si cake deposited on the membrane surface and the pore plugging by Si particles. Cake filtration from the cross flow application is compared to the combination of pore blocking and cake filtration from the dead-end application. The cake resistance is 3.16 x $10^{12}$ -4.34 X $\times$$10^{12}$ $m^{-1}$ for the cross flow and 6.6 x $\times$$10^{12}$ -12.19 X $\times$$10^{12}$ $\times$$m^{-1}$for the dead-end flow, respectively. At the initial stage of operation, permeation flux of cross flow type was 1.7 time higher than that of the dead end flow type. Permeation flux of cross flow was about 42 e 1m2 hr and the rejection rate of Si particles was about 96 %. The average particle size of Si particle in the permeate was 20 nm.

• Korean Journal Plant Pathology
• /
• v.13 no.3
• /
• pp.167-171
• /
• 1997

To find optimum application methods of Epicoccosorus nematosporus for control of water chestnut, five different concentration of conidial suspensions ($10^[3}$ conidia/ml to $10^[7}$ conidia/ml) fo the fungus were applied 1 to 4 times on 10~40 days old seedlings of water chestnut in greenhouse. Inoculum levels equal to or greater than $10^[5}$ conidia/ml killed significantly more shoots (82.6%~92.1%) and suppressed significantly underground tuber formation compared to inoculum concentration less than $10^[4}$ conidia/ml. When the conidial suspension of ($6.3 {\times} 10^{5}$conidia/ml of E. nematosporus was sprayed 2 times in 7 days interval, percentage of the killed plants was up to 98.7%. Numbers of reshoots and tubers were alsosuppressed significantly compared to one time application. The percents of killed shoots were similar between 10-day-old and 20-day-old seedlings, and significantly higher than those treated on 30- or 40-day-old seedlings. The fungus treated on 20-day-old seedlings was the most effective because there was high number of reshoots from 10-day-old seedlings. Therefore, optimal application conditions for E. nematosporus is 2~3 times of application in 7 days interval with $10^[5}$ conidia/ml on 20-day-old seedling age.

• The Korean Journal of Pesticide Science
• /
• v.6 no.3
• /
• pp.224-229
• /
• 2002

In vivo metabolism study was carried out to find out the biochemical or metabolic tolerance mechanism between Diamond backmoth (DBM), Plutella xylostella and Beet armywarm (BAW), Spodoptera exigua to flupyrazofos. They showed some differences between the DBM and BAW. About 20% of flupyrazofos applied to the 3rd instar larvae of DBM was metabolized within 1 h and about 50% of that was metabolized within 4 h. The metabolites of flupyrazofos-oxon in 3rd instar larvae of DBM were increased 10 times more at 4 h than 1 h after application. The amounts of flupyrazol were nearly same between at 1 h and 4 h. The amount of unknown and origin increased 2 and 3 times more at 1 h than 4 h after application, respectively. In the 4th instar BAW larva, about 50% of flupyrazofos was metabolized within 1 h and about 70% of that was metabolized within 4 h. As metabolites, the amounts of flupyrazofos-oxon increased 2 times more at 4 h than 1 h after application. The amounts of flupyrazol increased 4 times more at 4 h than 1 h after application. The amount of unknown and origin increased 2.5 and 2 times more at 4 h than 1 h after application, respectively. From the study, it is supposed that hydrolytic enzyme, esterase, cleave the alkyl bond of flupyrazofos and conjugates with flupyrazofos. This seems to be the main tolerance mechanism of BAW to flupyrazofos.

• The Magazine of the IEIE
• /
• v.31 no.8
• /
• pp.44-51
• /
• 2004

최근 SoC (System on Chip) 기술의 발전으로 최대 10 Gbps의 처리율을 갖는 네트워크 프로세서가 개발되고 있다. 네트워크 프로세서는 기존의 ASIC (Application Specific Integrated circuit)또는 FPGA (Field Programmable Gate Array) 등 하드웨어가 수행하던 고속의 패킷 처리 기능을 소프트웨어 기반으로 처리하도록 함으로써 다양한 기능의 패킷 처리를 저비용으로 단시간 내에 개발 할 수 있는 장점을 갖고 있다.(중략)