• Water for future
• /
• v.26 no.3
• /
• pp.103-111
• /
• 1993

The HEC(Hydrologic Engineering Center)-2 program, which utilize the standard step method, is usually adopted in the practical works for the water surface profile computation of natural channels. Water profile computation is, in general, carried upstream for subcritical flow. On the other hand, when the reference water surface si given upstream, numerous efforts and a great deal of time are necessary to compute the downstream water surface profile for subcritical flow. A simple method, computing the water surface profile from upstream to downstream for subcritical flow by HEC-2, is suggested in this paper. The applicability and the accuracy of this method are discussed by applying this method to both prismatic and natural channels.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.1803-1805
• /
• 2000

This paper analyzes the effects of Ge profiles shape of SiGe heterojunction bipolar transistors (HBT's) for high frequency application. Device simulations using ATLAS/BLAZE for the SiGe HBT with trapezoidal or triangular Ge profile are carried out to optimize the device performance. An HBT with 15% triangular Ge profile shows higher cut-off frequency and DC current gain than that with 19% trapezoidal Ge profile. The cut-off frequency and BC gain are increased from 42GHz to 84GHz and from 200 to 600, respectively.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.3 s.96
• /
• pp.208-214
• /
• 1999

The purpose of this paper is to develop a profile modification technique of spur gears and its computer program for the prevention of gear tooth overlap. In the gear system, tooth overlap produces an impact at the initial contact of some tooth pairs. In this analysis, contact surface was assumed to be unbonded and frictionless under small deformation and stain. The problem is formulated by a variational statement with inequality constraint. Tooth load sharing is obtained by the application of contact theory, and overlap is known by the analysis of deformation. After carrying out the profile modification of gear tooth, we verified the reasonable results.

• Transactions of Materials Processing
• /
• v.28 no.4
• /
• pp.197-202
• /
• 2019

This paper proposes a precise mathematical model for the prediction of the variation of the roll force across a strip in cold rolling. It further describes the deformation characteristics of the strip using a 3-D finite element method. The different features of hot rolling and cold rolling through a 3-D finite element method are shown. The predicted roll force profile and tension profile are verified through comparison with the prediction from a 3-D finite element method.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.12 no.3
• /
• pp.221-233
• /
• 2007

In this paper, a simple but effective position profile generation algorithm for single axis high dynamic linear machine drive system is presented. In the recent industrial application fields like as LCD/PDP and semiconductor factory, requirements for the high performance positioning system with optimal position profile generator are highly increased to reduce the overall processing time. There might be various solutions for position profile generating algorithm according to the application type. A square-wave Impact quantity(Jerk) based algorithm with minimal locomotion time is argued in this paper to minimize the total time of one movement under some specific constrains such as maximum speed limit and maximum acceleration limit. In order to reduce the calculation efforts and satisfy the minimal locomotion time condition, the time variants representing each profile sector and a simple condition comparison algorithm are adopted. Also, the actual implementation method for profile generation algorithm and it's real performance results are presented through commercial linear machine drive system.

• Tribology and Lubricants
• /
• v.31 no.5
• /
• pp.205-212
• /
• 2015

In this research, effects of profile changes of stem section of the plunger on the lubrication characteristics of a fuel injection pump (FIP) were evaluated by hydrodynamic lubrication analysis. The clearance between plunger and barrel was divided into two regions, head and stem. The head was not involved in preventing a decrease of fuel oil pressure. So, research efforts were focused on both edges of the plunger’s stem. The two -dimensional Reynolds equation was used to evaluate lubrication characteristics with variations in viscosity, clearance and profile for a laminar, incompressible, unsteady-state flow. Moreover, the equilibrium equation of moment and forces in the vertical and horizontal directions were used to determine the motion of the plunger. The equations were discretized using the finite difference method. Lubrication characteristics of the FIP were investigated by comparing the dimensionless minimum film thickness, or film parameter, which is the ratio of minimum film thickness to surface roughness. Through numerical analyses, we showed that the profile of the lower edge of the stem had no effect on lubrication characteristics, but the profile of the upper edge had a significant influence on lubrication characteristics. In addition, changes in the profile were more effective in improving lubrication characteristics under low viscosity conditions.

• Laser Solutions
• /
• v.17 no.4
• /
• pp.20-23
• /
• 2014

In printed electronics, printing rolls are used to transfer electronic ink onto a flexible substrate. Generally printing rolls are patterned in microscale by the indirect laser method. Since based on the wet etch process, the indirect method is neither environment-friendly nor suitable for making a printing roll with patterns narrower than $20{\mu}m$. In this paper, we have directly engraved micro-patterns into a Zn-coated metal specimens using a picosecond laser in order both to engrave $10{\mu}m$-wide patterns and to improve the pattern profile. Experiments showed that it is possible to engrave $10{\mu}m$-wide patterns with an a rectangular-shaped profile which is necessary for the dimensionally accurate printing.

• International Journal of Automotive Technology
• /
• v.8 no.2
• /
• pp.225-232
• /
• 2007

A tooth profile modification for loaded gears is used to avoid a tooth impact. Since a tooth profile error causes amplification of the cumbersome whine noise in automotive gear transmissions, an optimal quantity of tooth profile modifications must be obtained for good performance in the vibration sense. In this paper, a tooth profile modification curve considering profile manufacturing errors and elastic deformation of the gear tooth is formulated; in addition, transmission errors of the gear system with modified teeth are verified. The equivalent excitation due to transmission errors is formulated. For experimental evaluation of the transmission error, the transmission error for a simple gear system was measured by two rotational laser vibrometers. Finally, we perform a comparative analysis between the calculated and measured responses to the excitations due to the transmission error to verify the practicability of the application to automotive transmissions.

• International Journal of Contents
• /
• v.8 no.1
• /
• pp.47-54
• /
• 2012

The dynamic adaptation between various service environments using the application profiles for the service continuity is a key issue of the profile-based service continuity framework (PSCF) for N-screen service using next generation networks. PSCF offers an optimized service framework for providing continuous user services, which are multimedia video streaming, educational broadcasting, game, etc., using the various devices that are not restricted by the service environment of the user. This paper specifies the functional model of PSCF, service scenario and explains the experimental results of the service continuity for N-screen service using PSCF.

• Journal of Communications and Networks
• /
• v.5 no.3
• /
• pp.215-221
• /
• 2003

It is expected that per-user customized services are widely used in next generation Personal Communication Network. To provide personalized services for each call, per-user service profiles are frequently referenced and signaling traffic is considerably large. Since the service calls are requested from the places where user stays, we can expect that the traffic is localized. In this paper, we propose a new service profile replication scheme, named Follow-Me Replication with local Anchor (FMRA). By replicating user's service profile in a user-specific location area, local anchor of each region, the signaling traffic for call and mobility can be distributed to local network. We compared the performance of the FMRA with two typical schemes: Intelligent Network-based !Central scheme and IMT-2000 based full replication scheme, as we refer it to Follow-Me Replication Unconditional (FMRU). Performance results indicate that FMRA lies between Central and FMRU schemes according to call to mobility ratio, and we identified the efficient ranges of CMR for FMRA depending on the various network parameters.