• The Transactions of the Korea Information Processing Society
• /
• v.6 no.11
• /
• pp.3086-3096
• /
• 1999

To declare conformance of multi-protocol Implementation Under Test(IUT), every layer of the multi-protocol IUT should be tested. According to ISO9646, single-layer test method is applied to testing the highest layer of multi-protocol IUT and single-layer embedded test method is used for the layers by layer all the protocols in a multi-protocol IUT. This paper proposes a new method for testing a multi-protocol IUT. The proposed test method assumes that a multi-protocol IUT is under test and that the interfaces between the layers cannot be controlled or observed by the tester. We apply the proposed test method to TCP/IP and compare the application results with those of the existing test turns out that the proposed test method significantly reduces the number of test cases as well as the number of test events while providing the same test coverage. In addition, the proposed test method shows the capability to locate the layer that is source of failure in testing multi-protocol IUTs.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.263-265
• /
• 2012

잠수함이 가장 취약한 시기는 잠수함이 스노클이나 잠망경 운용을 위하여 잠망경 심도로 항해할 경우이며, 이때에는 비음향 탐지센서인 레이더와 광학, 사람에 의한 시각에 탐지될 확률이 매우 높다. 따라서 본 논문에서는 이러한 상황에서 탐지되는 취약성을 극복하고자 잠수함 마스트 및 잠망경 부분에 비음향 스텔스를 적용하고자 한다. 먼저 비음향 탐지센서에 대해서 조사하고, 그에 따른 스텔스 기법을 분야별 분석하여 최적화한 결과 다층형 구조로 선체표면부터 RAM layer, IR layer, Camouflage layer 구조로 각각 RAM layer는 자성재료인 페라이트계열로 3~5mm, IR layer는 Ceramic 또는 Nickel 계열로 1~2mm, Camouflage layer는 군청색 계열 페인팅을 제시하였다.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.5
• /
• pp.464-474
• /
• 2004

This paper proposes a middleware structure for the module-based personal robot, which can run on heterogeneous network interfaces and provides users easy interface-method regardless of underlying heterogeneous interfaces and convenient exchange of modules. The proposed middleware is divided into three layers of a streaming layer (SL), a network adaptation layer (NAL) and a network interface layer (NIL). The streaming layer manages application transactions using middleware services and provides user a uniform interfaces to the proposed middleware. The network adaptation layer manages a message-routing and provides naming service and it is a core of the proposed middleware. And the network interfaces layer manages dependent parts of heterogeneous network interfaces such as IEEE1394, USB, Ethernet, and CAN (Control Area Network). This paper implements the proposed middleware structure, where 3 types of interfaces of IEEE 1394, USB and Ethernet are used, and measures response times among those interfaces.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.11 s.254
• /
• pp.1348-1357
• /
• 2006

In a hybrid three-layer control architecture(deliberative, sequencing, and reflexive), the lowest reflexive layer consists of resources, actions, an action coordinator, and motion controllers. Because the execution of individual components in the reflexive layer should be done in real-time, each component has to be simple and, due to this reason, the Linux-RTAI(Real-Time Application Interface for Linux) has been used as an operating system. In this paper, a navigation control architecture, which combines the components in the reflexive layer and the navigation-related modules in the sequencing layer, is proposed. And then, as basic components, four actions(Goto, Avoid, Move, and EmergencyStop) are designed. Experimental results confirm the effectiveness of the proposed architecture and the performance of individual associated actions.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2006.11a
• /
• pp.125-128
• /
• 2006

In the history of space design, the concept and application of Multi-Layer can be easily found in various projects. As life styles in the contemporary cities are becoming more and more complex and inter-related to each other, the concept of multi-layer is re-considered In terms of constructing differentiated life patterns as well as multi programs within certain physical buildings or designs. This study aims to analyze the brief history of multi-layer in space design and the contemporary applications in recent architectural as well as interior design projects. It is concluded that the concept of multi layer is not only useful for constructing an interesting spatial organizations, but can also be a vital tool for re-organizing the contemporary urban programs that cannot be considered with the preconceived existing terms.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.48 no.2
• /
• pp.76-79
• /
• 1999

Low-hydrogenated DLC films were coated on the Mo-tip FEAs by 'layer-by-layer' process based on the plasma-enhanced CVD method. The hydrogen content in the DLC film deposited by the 'layer-by-layer' process was appeared to be remarkably lowered through SIMS analysis. Also, the low-hydrogenated DLC-coated Mo-tip FEA showed good potentiality for FED applications in terms of turn-on voltage, emission current, emission stability and light emitting uniformity.

• Electrical & Electronic Materials
• /
• v.9 no.6
• /
• pp.600-604
• /
• 1996

High-T$_{c}$, superconducting wire is very important element for the application of electrical power systems. But it is very difficult to develope the long high T, wire with excellent properties. BiSrCaCuO multi-layer tapes are fabricated by a rolling method and pressing method sintered for several step at 840.deg. C. The critical current densities of 637 filament multi-layer tapes sintering 100 hours fabricated by the rolling method and pressing method are 1.3*10$^{4}$ A/cm$^{2}$ and 5.5*10$^{3}$ A/cm$^{2}$. The critical cur-rent densites of multi-layer tapes made by rolling method are found to be better than those fabricated by the powder-in-tube method and pressing process. As result, the rolling method is the best way to fabricated the multi-layer filament.t.

• Fashion & Textile Research Journal
• /
• v.8 no.6
• /
• pp.709-712
• /
• 2006

The aim of this study is to find out comfortable combinations of layered system for outdoor activities through water vapor permeability. Layering fabrics is an effective way of controlling water transport properties in fabric systems for outdoor activities and analysis of these systems may be useful for designing comfortable clothing. Seven fabrics were chosen for the experiments: two fabrics for base layer, two for the middle layer and three for the shell layer. A total of 12 different layered systems, which are all possible combinations were established using selected fabrics. The water vapor permeability was measured using JIS L1099 under isothermal and non-isothermal conditions. It was found that layered system was working together as a whole having influence on each layer, though every layer offers varying degree of water vapor permeability. Furthermore, it was also found that an optimal combination of the three layered system does exist although the combination may differ according to the ways. The shell layer is the greatest effect of water vapor permeability under isothermal and non-isothermal conditions within layered system.

• Journal of Advanced Marine Engineering and Technology
• /
• v.18 no.4
• /
• pp.33-42
• /
• 1994

The radiative heat transfer analysis in the fluidized particles layer has important application in many technological areas such as combustion chambers at high pressure and temperature, plasma generators for nuclear fusion, MHD generator using pulverized coal and the liquid droplet radiator used to reject wasted heat from a power plant operating in space. To accurately model the radiation properties of the fluidized particles layer, it is necessary to know the radiation interchange factors of particles in each layer. But the solutions are usually not possible for the equations of radiative heat transfer because it has an inherent difficulty in treating the governing intergo- differential equations, which are derived from the remote effects of radiative heat transfer. In this study, the analysis uses the Monte Carlo simulation method with optical depth model to calculate the radiation interchange factors of particles in each layer with wall and with each other.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.28B no.12
• /
• pp.27-37
• /
• 1991

In this paper, the novel PLD (Preceding Layer Driven) MLP (Multi Layer Perceptron) neural network model and its learning algorithm is described. This learning algorithm is different from the conventional. This integer weights and hard limit function are used for synaptic weight values and activation function, respectively. The entire learning process is performed by layer-by-layer method. the number of layers can be varied with difficulty of training data. Since the synaptic weight values are integers, the synapse circuit can be easily implemented with CMOS. PLD MLP neural network was applied to English Characters, arbitrary waveform generation and spiral problem.