• Journal of the Korean Institute of Landscape Architecture
• /
• v.37 no.2
• /
• pp.1-13
• /
• 2009

The purpose of this study was to look into the feasibility of site suitability focused on the potential for environmentally- and water-friendly recreation area development in a wide area(Nakdong River 35km) and to study new methods for providing basic data in regard to the recreation planning over a wide area as well as in application to other sites. The results of this study are as follows. Through classification by mesh method, the site of this study was classified into 42 grids, and by means of the analysis of evaluation indicators, 20 indicators were established and sorted into 4 types of significant recreation activity. According to the results of the analysis for each recreation activity type, there were 8 essentials for water-friendly recreation activity types based on water use while water-friendly recreation types for static activity included 12 sub-essentials. As a result of the first evaluation(the minimum required evaluation) by each classified grid, 32 of the 42 total grids were implemented by the minimum requirements. These grids were usually distributed evenly through the whole site. In terms of the second evaluation(specific site evaluation) results, 6 grids were highly suitable for recreational nature experiences and landscape ecological learning, 4 grids for developing water-friendly recreation for exercise, 1 grid for building water-friendly recreation based on water use, and 4 grids for planning water-friendly recreation for static activity. The results of the grid evaluation of this study could be extended to contiguous grids or reduced. Actual planning for a water-friendly recreation area must change the grid shape or size through boundary adjustments.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2004.11a
• /
• pp.122-125
• /
• 2004

In radiotherapy of tumors in liver, enough planning target volume (PTV) margins are necessary to compensate breathing-related movement of tumor volumes. To overcome the problems, this study aims to obtain patients' body movements by using a moving phantom and an ultrasonic sensor, and to develop respiration gating techniques that can adjust patients' beds by using reversed values of the data obtained. The phantom made to measure patients' body movements is composed of a microprocessor (BS II, 20 MHz, 8K Byte), a sensor (Ultra-Sonic, range 3 cm ${\sim}$3 m), host computer (RS232C) and stepping motor (torque 2.3Kg) etc., and the program to control and operate it was developed. The program allows the phantom to move within the maximum range of 2 cm, its movements and corrections to take place in order, and x, y and z to move successively. After the moving phantom was adjusted by entering random movement data(three dimensional data form with distance of 2cm), and the phantom movements were acquired using the ultra sonic sensor, the two data were compared and analyzed. And then, after the movements by respiration were acquired by using guinea pigs, the real-time respiration gating techniques were drawn by operating the phantom with the reversed values of the data. The result of analyzing the acquisition-correction delay time for the three types of data values and about each value separately shows that the data values coincided with one another within 1% and that the acquisition-correction delay time was obtained real-time (2.34 ${\times}$ 10$^{-4}$sec). This study successfully confirms the clinic application possibility of respiration gating techniques by using a moving phantom and an ultra sonic sensor. With ongoing development of additional analysis system, which can be used in real-time set-up reproducibility analysis, it may be beneficially used in radiotherapy of moving tumors.

• Korean Journal of Soil Science and Fertilizer
• /
• v.11 no.4
• /
• pp.283-295
• /
• 1979

A new Farmland Expansion and Development Promotion Law was enacted in 1975. This law authorizes the Government to undertake development within a declared "reclamation area", wherever the land owners are unable to do so. In order to give additional impetus to conversion of waste hilly land into productive farmland, these hilly land development projects were conducted as large scale scheme which include soil fertility improvements such as the application of lime and phosphate. Farmland Expansion and Development Promotion Corps has attempted to undertake annual farm surveys in order to obtain some information about hilly land agriculture and farming operations within the reclamation project areas since 1976. As survey data accumulates, more and more clear picture of hilly land farming come to appear and enable us to conduct in-depth study. Effects of such upland reclamation include converting of previously unproductive slopeland into cultivable farmland for lucrative and commercial farming or food production. Furthermore, idle or marginal resources such as farm labor, equipment and compost would be fully employed. Socio-economic effects would include increases in land value and attitude change of farmers. On the other hand the preservation of natural environments might be damaged to the some extend by the projects. As shown in Table 7, the average farm size increased from 3,156 pyeong($3.3m^2$) to 5,562 pyeong, a 76.2% increase. The proportion of small farms with less than I ha dropped from 59.8% to 34.4%, but that of the large farms over 2 ha rose from 13.1% to 32.0% (See Table 8). The survey results indicate that as the farming on reclaimed uplands become time-honored, the acreage devoted for food crop production decreases against the economic crop growing acreage (see Table 6). For example, in the case of uplands reclaimed in 1972, the ratio of food crop acreages decreased from 99.7% in 1972 to 62.5% in 1977, whereas that of economic crop acreages increased from 0.3% in 1972 to 37.5% in 1977. The government used to actively encourage the farmers to carry out food crop production in the reclaimed upland targting toward the realization of self-sufficiency in food grains. It is, however, apparent that the farmers did hardly take the government advises as far as their economic interest were concerned. Yield per 10a. of various crops from the reclaimed uplands by year were surveyed as seen in Table 12. On the average, barley production in the reclaimed areas achieved 83.3% of the average unit yield from the existing upland in its 5 th year. Soybean yields showed a modest increase from 64% in the first year to 95%, in the 5 th year. In contrast, economic crops such as red pepper, totacco and radish achieved their maximum target yields in 3 years from starting to cultivate on the reclaimed farms. In order to test the post economic viability, an economic analysis was performed for each of selected subprojects on the basis of the data obtained through survey. The average actual internal economic rate of return on upland reclamation investments was found to be 20.3% which exceeded other types of projects of land and water development such as tidal land reclamation, irrigation or paddy rearrangement. The actual IRRs of subcategories of upland reclamation projects varied from 17.9% to 21.4% depending upon the kinds of cropping system adopted in each reclaimed areas such as food, economic, fruit or forage crops.

• Progress in Medical Physics
• /
• v.18 no.1
• /
• pp.27-34
• /
• 2007

Respiration sating radiotherapy technique developed In consideration of the movement of body surface and Internal organs during respiration, is categorized into the method of analyzing the respiratory volume for data processing and that of keeping track of fiducial landmark or dermatologic markers based on radiography. However, since these methods require high-priced equipments for treatment and are used for the specific radiotherapy. Therefore, we should develop new essential method whilst ruling out the possible problems. This study alms to obtain body surface motion by using the couch based computer-controlled motion phantom (CBMP) and US sensor, and to develop respiration gating techniques that can adjust patients' beds by using opposite values of the data obtained. The CBMP made to measure body surface motion is composed of a BS II microprocessor, sensor, host computer and stopping motor etc. And the program to control and operate It was developed. After the CBMP was adjusted by entering random movement data, and the phantom movements were acquired using the sensors, the two data were compared and analyzed. And then, after the movements by respiration were acquired by using a rabbit, the real-time respiration gating techniques were drawn by operating the phantom with the opposite values of the data. The result of analysing the acquisition-correction delay time for the data value shows that the data value coincided within 1% and that the acquistition-correction delay time was obtained real-time $(2.34{\times}10^{-4}sec)$. And the movement was the maximum movement was 6 mm In Z direction, In which the respiratory cycle was 2.9 seconds. This study successfully confirms the clinical application possibility of respiration gating techniques by using a CBWP and sensor.

• Journal of Environmental Policy
• /
• v.11 no.2
• /
• pp.3-16
• /
• 2012

Objectives of the Korean Environmental Conservation Value Assessment Map (ECVAM) is to evaluate environmental value used in comprehensive environmental information in order to encourage eco-friendly land use and management. The first research was conducted in 2001 to establish the evaluation items and the criteria of the ECVAM, and the first nationwide map was established in the period of 2003 to 2005. The maps are updated annually to reflect environmental changes of land. The evaluation items and the criteria have been modified based on feasibility studies to improve the accuracy of the maps. This study re-evaluated the ECVAMs from 2005 to 2010 with criteria used in current environment and analyzed the changes in the area of the maps in 6 years. This is also an investigation on the maps whether they are appropriate as an index for sustainable environmental monitoring. The result shows that the 1st grade level of the ECVAM area with the highest conservation value had been expanding since 2005. These changes were analyzed in terms of updating the 4th Forest Map (2008) produced once every 10 years, reflecting the new legal protected areas such as Baekdudaegan Protected Area(2010), and the environmental/ecological assessment items such as the National Ecological Network (2009). This mean the ECVAM are a monitoring index that integrates individual environmental indexes including the increase of forest age and diameter due to sustainable management of forest areas, and the change of conservation areas. Therefore, ECVAM can be used as a new index integrating national environmental indicators for monitoring changes of national environment and policy. In order to utilize the ECVAM, improving accuracy and reducing renewal cycle time of thematic maps are required.

• Journal of Korean Society of Forest Science
• /
• v.49 no.1
• /
• pp.6-10
• /
• 1980

The witches' broom disease of Paulownia tomentosa (Thunb.) Steud with which mycoplasmalike organisms are associated is widespread throughout Korea and poses serious threat to the cultivation of paulownia. Attempt was made to investigate the feasibility of field control of the disease with oxytetracycline hydrochloride (OTC). A total of 84 paulownia trees (6 year-old, DBH: 10-15cm) exhibiting severe symptoms of witches' broom were selected and treated during March to September. Solution of 1-10g of OTC dissolved in 0.1­2.0 of water was transfused into infected trees with gravity flow method from a dark-brown colored plastic reservoir (11 volume) through plastic tubes (1.2m long) connected to 2-4 holes (5 mm in diameter and 4-5cm in depth) bored in the basal part of the tree trunks (Fig. 1 and 2). Of 60 diseased paulownia trees injected with 2g of OTC in 0.1-2.0l of water during May to September, 1979, 58 trees resulted in complete remission of symptom development and resumption of healthy new growth at least up to September, 1980 when the last observation of the effect of OTC treatment for this experiment was made. The rest of two trees were dead probably due to too severe infection. Of 24 paulownia trees treated in March and April, 1979 complete remission of symptom development was obtained with 8 trees, and nine trees were partially prevented from symptom development in the following season. The remaining 7 trees were dead due to failure in uptake of OTC and partly because the trees were in too far advanced stage of infection. Application of highly concentrated solution of 2g of OTC dissolved in 0.1-0.2l of water per tree was just as effective as the 2g/1-2l treatment. Injection of 2g/1-2l required 3-4 days while treatment of 2g/0.1-0.2l reduced the time for injecting one tree down to less than 24 hrs. The result of this experiment demonstrates that basal trunk injection of 2g OTC/0.1-0.2l/tree is feasible for field control of paulownia witches' broom, provided that tree injection is performed in actively growing season (May-September) and at the initial stage of disease development.

• Progress in Medical Physics
• /
• v.20 no.3
• /
• pp.132-138
• /
• 2009

Studies on target motion in 4-dimensional radiotherapy are being world-widely conducted to enhance treatment record and protection of normal organs. Prediction of tumor motion might be very useful and/or essential for especially free-breathing system during radiation delivery such as respiratory gating system and tumor tracking system. Neural network is powerful to express a time series with nonlinearity because its prediction algorithm is not governed by statistic formula but finds a rule of data expression. This study intended to assess applicability of neural network method to predict tumor motion in 4-dimensional radiotherapy. Scaled Conjugate Gradient algorithm was employed as a learning algorithm. Considering reparation data for 10 patients, prediction by the neural network algorithms was compared with the measurement by the real-time position management (RPM) system. The results showed that the neural network algorithm has the excellent accuracy of maximum absolute error smaller than 3 mm, except for the cases in which the maximum amplitude of respiration is over the range of respiration used in the learning process of neural network. It indicates the insufficient learning of the neural network for extrapolation. The problem could be solved by acquiring a full range of respiration before learning procedure. Further works are programmed to verify a feasibility of practical application for 4-dimensional treatment system, including prediction performance according to various system latency and irregular patterns of respiration.

• Journal of Animal Environmental Science
• /
• v.17 no.sup
• /
• pp.61-68
• /
• 2011

To assess the total cost with all stages of facilities, the feasibility of Life Cycle Cost (LCC) analysis was examined in this study to estimate the livestock manure treatment system and optimal decision making process. For the economic evaluation, the plant/equipment investment and annual operation cost of four Public Livestock Recycling Facilities, whose treatment capacity is 100 ton piggery manure per day, was compared. The initial cost was in the range of 2,699 million won to 3,202 million won, where T and E methods were highest and lowest, respectively. The annual operation cost was in the level of 378 million to 498 million won, which decreased in the following order : T method > J method > E method > B method. For the LCC analysis, 4.7% of interest rate, 3.13% of inflation rate, and 1.52% of net discount rate was considered by the data received from Bank of Korea and Statics Korea in the period of 2000 to 2009. Also, for the calculation of present value factor, the durable years of civil engineering & construction, machinery and electric instrument was 30 years, 10 years and 15 years, respectively. Based on these consideration, operation cost was in the range of 17,570 won/ton to 20,661 won/ton, and E method (17,570 won/ton) was economical and B method (20,661 won/ton) was non-economical. Though initial cost of T method was higher than that of B method, LCC analysis of T method was lower than that of T method due to the lower operation cost. Therefore, LCC analysis, which considers both initial cost and operation cost, is more reasonable evaluation method than either initial cost or annual operation cost. For the change of LCC analysis according to the uncertainty, the sensitivity analysis was carried out using fluctuation magnitude of discount rate in the period of 2000 to 2009. As a result, LCC analysis evaluated by discount rate was stable for the uncertain factors since the cost leadership did not change even though the sensitivity analysis varied. In summary, the economic evaluation using LCC analysis could be an efficient reference to choose the suitable livestock manure treatment plants. Furthermore, standardization of statement calculation for the actual cost analysis should be conducted and more detailed study is necessary to validate this summary. Therefore, the application of comprehensive technology evaluation, which considers LCC analysis, should contribute in obtaining objectivity and enhancing reliability for the 'Evaluation of Livestock Manure Treatment System and its Technology'.

• Asia pacific journal of information systems
• /
• v.21 no.1
• /
• pp.81-101
• /
• 2011

In today's rapidly changing and increasingly competitive business environment, new product development in tune with market trends in a timely manner has been a matter of the utmost concern for all enterprises. Indeed, developing a sustainable new business has been a top priority for not only business enterprises, but also for the government policy makers accountable for the health of Its national economy as well as for decision makers in what type of organizations. Further, for a soft landing of new businesses, building a government-initiated industry base has been claimed to be necessary as a way to effectively boost corporate activities. However, the existing methodology in new service and new product development is not suitable for nurturing industry, because it is mainly focused on the research and development of corporate business activities instead of new product development. The approach for developing new business is based on 'innovation' and 'convergence.' Yet, the convergence among technologies, supplies, businesses and industries is believed to be more effective than innovation alone as a way to gain momentum. Therefore, it has become more important than ever to study a new methodology based on convergence in industrial quality new product development (NPD) and new service development (NDS). In this research, therefore, we reviewed any restrictions in the existing new product and new service development methodology and the existing business model development methodology. In doing so, we conducted industry standard collaboration analysis on a new service model development methodology in the private sector and the public sector. This approach is fundamentally different from the existing one in that ours focuses on new business development under private management. The suggested framework can be categorized into industry level and service level. First, in the industry level, we define new business opportunities In occurrence of convergence between businesses. For this, we analyze the existing industry at the industry level to identify the opportunities in a market and its business attractiveness, based on which the convergence industry is formulated. Also, through the analysis of environment and market opportunity at the industry level. we can trace how different industries are lined to one another so as to extend the result of the study to develop better insights into industry expansion and new industry emergence. After then, in the service level, we elicit the service for the defined new business, which is composed of private service and supporting service for nurturing industry. Private service includes 3steps: plan-design-do; supporting service for nurturing industry has 4 steps: selection-make environment- business preparation-do and see. The existing methodology focuses on mainly securing business competitiveness, building a business model for success, and offering new services based on the core competence of companies. This suggested methodology, on other hand, suggests the necessity of service development, when new business opportunities arise, in relation to the opportunity analysis of supporting service based on the clear understanding of new business supporting infrastructure optimization. Meanwhile, we have performed case studies on the printing and publishing field with the restrict procedure and development system to assure the feasibility and practical application. Even though the printing and publishing industry is considered a typical knowledge convergence industry, it is also known as a low-demand and low-value industry in Korea. For this reason, we apply the new methodology and suggest the direction and the possibility of how the printing and publishing industry can be transformed as a core dynamic force for new growth. Then, we suggest the base composition service for industry promotion(public) and business opportunities for private's profitability(private).

• Journal of Distribution Science
• /
• v.10 no.7
• /
• pp.33-41
• /
• 2012

The purpose of this study is to analyse the state of the energy industry and to determine the efficiency of its functioning on the basis of energy conservation principle and application of innovative technologies aimed at improving the ecological modernisation of agricultural sectors of Kazakhstan. The research methodology is based on an integrated approach of financial and economic evaluation of the effectiveness of the investment project, based on calculation of elasticity, total costs and profitability, as well as on comparative, graphical and system analysis. The current stage is characterised by widely spread restructuring processes of electric power industry in many countries through introduction of new technical installations of energy facilities and increased government regulation in order to enhance the competitive advantage of electricity market. Electric power industry features a considerable value of creating areas. For example, by providing scientific and technical progress, it crucially affects not only the development but also the territorial organisation of productive forces, first of all the industry. In modern life, more than 90% of electricity and heat is obtained by Kazakhstan's economy by consuming non-renewable energy resources: different types of coal, oil shale, oil, natural gas and peat. Therefore, it is significant to ensure energy security, as the country faces a rapid fall back to mono-gas structure of fuel and energy balance. However, energy resources in Kazakhstan are spread very unevenly. Its main supplies are concentrated in northern and central parts of the republic, and the majority of consumers of electrical power live in the southern and western areas of the country. However, energy plays an important role in the economy of industrial production and to a large extent determines the level of competitive advantage, which is a promising condition for implementation of energy-saving and environmentally friendly technologies. In these circumstances, issues of modernisation and reforms of this sector in Kazakhstan gain more and more importance, which can be seen in the example of economically sustainable solutions of a large local monopoly company, significant savings in capital investment and efficiency of implementation of an investment project. A major disadvantage of development of electricity distribution companies is the prevalence of very high moral and physical amortisation of equipment, reaching almost 70-80%, which significantly increases the operating costs. For example, while an investment of 12 billion tenge was planned in 2009 in this branch, in 2012 it is planned to invest more than 17 billion. Obviously, despite the absolute increase, the rate of investment is still quite low, as the total demand in this area is at least more than 250 billion tenge. In addition, industrial infrastructure, including the objects of Kazakhstan electric power industry, have a tangible adverse impact on the environment. Thus, since there is a large number of various power projects that are sources of electromagnetic radiation, the environment is deteriorated. Hence, there is a need to optimise the efficiency of the organisation and management of production activities of energy companies, to create and implement new technologies, to ensure safe production and provide solutions to various environmental aspects. These are key strategic factors to ensure success of the modern energy sector of Kazakhstan. The contribution of authors in developing the scope of this subject is explained by the fact that there was not enough research in the energy sector, especially in the view of ecological modernisation. This work differs from similar works in Kazakhstan in the way that the proposed method of investment project calculation takes into account the time factor, which compares the current and future value of profit from the implementation of innovative equipment that helps to bring it to actual practise. The feasibility of writing this article lies in the need of forming a public policy in the industrial sector, including optimising the structure of energy disbursing rate, which complies with the terms of future modernised development of the domestic energy sector.