• Journal of Korean Society for Atmospheric Environment
• /
• v.8 no.1
• /
• pp.74-83
• /
• 1992

Photochemical reactions are important for the diurnal variation of the concentrations of air pollutants in the urban atmosphere. A photochemical reaction model was developed, which includes in terms of the effective chemical reaction. Various experimental results were introduced to the construction of model. To verify the applicability of the model, the simulated results were compared with those observed. By comparing the simulated results with those observed, it was shown that those two are in good agreement qualitatively. As a result, the photochemical reaction model which has been developed in this study is found to be useful for the prediction of concentrations of air pollutants in the atmosphere.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 1998.10a
• /
• pp.370-375
• /
• 1998

The objectives of this study are to evaluate the applicability of SCS TR-20 model for small ungauged watershed, to show the behavior of the model with variation of topography in watershed, and to evaluate the storage effect of paddy field for flood flow. For this purpose, simulated data from the model were compared with the observed flood data at two sites (HS#3, HS#4) in Balan watershed. From the comparison between simulated and observed data, it was found that the model is applicable to this watershed.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.1
• /
• pp.17-27
• /
• 2014

Numerical model became one of most important tools for identifying the state of an existing structure in accordance with development of numerical analysis techniques. A numerical model should be updated based on the measured responses from the existing structure to accurately use the model for identifying the state of the bridge and executing numerical experiments. In this study, a new model updating method based on repetition method without a differential function is introduced and applicability for high speed railway bridge is verified with dynamic stability analysis. A fine measurement based on measurement points roaming method was executed with an wireless measurement system for precise dynamic characteristic analysis. The natural frequencies and mode shapes were estimated by correlation analysis and a mode decomposition technique. An initial numerical model was constructed based on design drawings and the model have been updated in accordance with the introduced model updating method. The results from numerical experiment and field test have been compared for verifying the applicability of the model updating method. And the dynamic stability analysis has been executed to verify the usability of the updated numerical model and the model updating method. It seems that the model updating method can be used for various bridges after evaluation of applicability for other type bridges in further studies.

• Communications for Statistical Applications and Methods
• /
• v.7 no.1
• /
• pp.211-224
• /
• 2000

The Bayes estimation of the proportion in successive occasions sampling with randomized response model is discussed by means of Acceptance Rejection sampling. Bayesian estimation of transition probabilities in two successive occasions is suggested via Markov Chain Monte Carlo algorithm and its applicability is represented in a numerical example.

• Environmental Analysis Health and Toxicology
• /
• v.30 no.sup
• /
• pp.7.1-7.10
• /
• 2015

Objectives For successful adoption of legislation controlling registration and assessment of chemical substances, it is important to obtain sufficient toxicological experimental evidence and other related information. It is also essential to obtain a sufficient number of predicted risk and toxicity results. Particularly, methods used in predicting toxicities of chemical substances during acquisition of required data, ultimately become an economic method for future dealings with new substances. Although the need for such methods is gradually increasing, the-required information about reliability and applicability range has not been systematically provided. Methods There are various representative environmental and human toxicity models based on quantitative structure-activity relationships (QSAR). Here, we secured the 10 representative QSAR-based prediction models and its information that can make predictions about substances that are expected to be regulated. We used models that predict and confirm usability of the information expected to be collected and submitted according to the legislation. After collecting and evaluating each predictive model and relevant data, we prepared methods quantifying the scientific validity and reliability, which are essential conditions for using predictive models. Results We calculated predicted values for the models. Furthermore, we deduced and compared adequacies of the models using the Alternative non-testing method assessed for Registration, Evaluation, Authorization, and Restriction of Chemicals Substances scoring system, and deduced the applicability domains for each model. Additionally, we calculated and compared inclusion rates of substances expected to be regulated, to confirm the applicability. Conclusions We evaluated and compared the data, adequacy, and applicability of our selected QSAR-based toxicity prediction models, and included them in a database. Based on this data, we aimed to construct a system that can be used with predicted toxicity results. Furthermore, by presenting the suitability of individual predicted results, we aimed to provide a foundation that could be used in actual assessments and regulations.

• Journal of the Korea Institute of Building Construction
• /
• v.11 no.5
• /
• pp.482-500
• /
• 2011

In apartment housing construction, window frame installation work, which is conducted after the structural framework, is very important, because its completion time directly affects the starting time of successive interior finishing works, as well as the overall construction period. Construction delays in interior finishing works might occur due to problems inherent to the conventional window frame installation method, such as the poor verticality of window frames, and the water leakage around them. The primary objective of this study is to analyze the problems of a 'Gangform integrated PVC window frame pre-installation method' based on its pilot test results. Next, this study proposes an improved conceptual model that enables the end users to enhance the field applicability of this method in terms of productivity, time, and cost. The field applicability of the proposed 'Gangform integrated PVC window frame pre-installation method' was also verified through a survey.

• Journal of Climate Change Research
• /
• v.6 no.2
• /
• pp.121-131
• /
• 2015

As the temperature has changed by climate change, changes in its own characteristic values of the chemical substance or the movement and distribution of chemicals take place in accordance with the changes of hydrological and meteorological phenomena. Depending on the impact of climate change on the chemical behavior, it is necessary to understand and predict quantitative changes in the dynamics of the environment of pollutants due to climate change in order to predict in advance the occurrence of environmental disasters, and minimize the impact on the life and the environment after the incident. In this study, we have analysed and compared chemical fate models validated by previous studies in terms of model configuration, application size and input/output factors. The potential models applicable to municipal and industrial areas were selected on the basis of characteristic of each model, availability of input parameters and consideration for climate change, identified the problems, and then presented an approach to improve applicability.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.10 no.6
• /
• pp.661-669
• /
• 2018

Engineering system problems consist of multi-objective optimisation and the performance analysis is generally time consuming. To optimise the system concerning its performance, many researchers perform the optimisation using an approximation model. The Response Surface Method (RSM) is usually used to predict the system performance in many research fields, but it shows prediction errors for highly nonlinear problems. To create an appropriate metamodel for marine systems, Lee (2015) compares the prediction accuracy of the approximation model, and multi-objective optimal design framework is proposed based on a confirmed approximation model. The proposed framework is composed of three parts: definition of geometry, generation of approximation model, and optimisation. The major objective of this paper is to confirm the applicability/usability of the proposed optimal design framework and evaluate the prediction accuracy based on sensitivity analysis. We have evaluated the proposed framework applicability in derrick structure optimisation considering its structural performance.

• Communications for Statistical Applications and Methods
• /
• v.19 no.6
• /
• pp.761-770
• /
• 2012

We frequently encounter outcomes of count that have extra variation. This paper considers several alternative models for overdispersed count responses such as a quasi-Poisson model, zero-inflated Poisson model and a negative binomial model with a special focus on a generalized linear mixed model. We also explain various goodness-of-fit criteria by discussing their appropriateness of applicability and cautions on misuses according to the patterns of response categories. The overdispersion models for counts data have been explained through two examples with different response patterns.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 1998.10a
• /
• pp.344-348
• /
• 1998

FEM numerical models have been known to provide an extensive applicability to the field of water resources development. However, some of restrictions such as requiring considerable number of input data and numerous subprocess were the problem of using such FEM numerical models. Especially, where the model is applied to the complex coastal area, difficulties will be intensified. Therefore it is necessary that the profitable user interface, data optimization, and structured system should be developed if the models could be used effectively. In this study, it is intended that development of integrated system for simulations of FEM numerical models to give better applicability in the field of water resources development. By using integrated system which was developed in this study, it would be concluded that the efforts to need some treatments for subprocesses of the FEM numerical model were decreased and GUI environment proved to be convinient for use for the on-the-job users.