• Journal of the korean academy of Pediatric Dentistry
• /
• v.24 no.3
• /
• pp.637-649
• /
• 1997

Early orthodontic treatment in growing children requires the removable orthodontic appliances. The removable orthodontic appliance can be used in the primary dentition and mixed dentition. The purposes of use of removable orthodontic appliance in prmary dentition or mixed dentition are the interception of skeletal or dental malocclusion, guiding the normal dentition, and retention after comprehensive orthodontic treatment. Therefore, it is needed to use the removable orthodontic appliance in children with malocclusion. This report presents cases of growing children with skeletal class II and III malocclusion treated with removable orthodontic appliance during mixed dentition and Multiloop Edgewise Arch Wire(MEAW) during permanent dentition. The results obtained through these cases were summarized as follows : 1. Removable orthodontic appliances guide normal dentition and skeletal growth in growing children. 2. Removable orthodontic appliances play an important role in intercepting malocclusion in mixed dentition before use of fixed orthodontic appliance. 3. MEAW can be applied to finishing stage of all cases and is effective in correction of occlusal plane, achievement of interdigitation, and control of dental inclination. 4. It is needed that removable appliances are used during mixed dentition through correct diagnosis and fixed appliance are used in permanent dentition.

• Journal of Korean Society for Quality Management
• /
• v.43 no.3
• /
• pp.421-438
• /
• 2015

Purpose: The purpose of this study was to grasp the level of effects innovative features and quality of the appliance system on organizational performance and ultimately analyze the willingness of the IT staff to adopt an appliance system. Methods: The survey was conducted on 350 vendors' clients and partners who currently use an appliance system from March to May 2014. A total of 331 effective questionnaires were collected and analyzed using PASW18 and SmartPLS. Results: The results show that relative advantage, facilitating condition and trialability and quality factors all had an effect on organizational performance expectations. Further, when an appliance system is adopted, it was shown that cost and reliability emphasized by a vendor did not produce any significant effects on organizational performance expectations. Conclusion: This study is significant as it is the first to combine such models as Innovation Diffusion Theory, Information Systems Success Model, and Unified Theory of Acceptance and Use of Technology with a new external variable. In addition, it illustrated how variables affect the adoption of an appliance system such as a new innovation system.

• Science of Emotion and Sensibility
• /
• v.14 no.4
• /
• pp.617-626
• /
• 2011

Home appliance proposes the experience of new lifestyle to consumers, together with digital technology-applied highly advanced functions, beyond its natural quality like the basic function of reducing the burden of housework. However, under the current circumstances that populations are rapidly aging, the number of elderly consumers, who feel it inconvenient to smoothly use even the basic function of home appliance, is increasing in proportion to populations. Therefore, the necessity for developing home appliance with improved usability in consideration of the elderly is rising up. This study analyzed the elderly's pattern of using home appliance and illustrated the procedure of their using home appliance, putting its focus on the home appliance that the elderly highly depend on in keeping their daily life and that they feel it inconvenient to control. And based on the illustrated procedure, this paper substituted various kinds of home appliance that were not surveyed by this study and found out 4 user behavioral models for home appliance. Same as the concept of universal design, product designs, which are convenient to use by the elderly whose physical functions are reduced, are expected acceptable to various user classes. The found user behavioral models purport to give references to design process for product planning and design solutions.

• Journal of Oral Medicine and Pain
• /
• v.32 no.4
• /
• pp.375-381
• /
• 2007

Occlusal stabilization appliance is one of the most common treatment option for management of temporomandibular disorders. It acts in oral cavity for several hours per day, and usually it will take at least 6 months to 2 years of total wearing periods to take a treatment goal. In the oral cavity, occlusal stabilization appliance, unintentional manner, is able to acts as a reservoir of bacteria and protect bacteria from saliva and oxygen. This condition is so favorable to many bacteria such as S. mutans and other anaerobes, usually have been reported as causative factors of dental caries, periodontal disease and oral malodor. In this study, we investigated anaerobic bacteria and S. mutans count before and after occlusal stabilization appliance use to evaluate the possible role of occlusal stabilization appliance as protector of these bacteria. Four men(average 27.5 years) wore maxillary occlusal stabilization appliance at each night(average 9 hours) for 5 days. we swabbed saliva-plaque mixed sample at 3 different site(maxillary left 2nd molar, maxillary left central incisor, mandibular left 2nd molar) before and after occlusal stabilization appliance use. Each samples were plated in (1) anaerobic blood agar medium, (2) selective S. mutans medium(MS-MUTV) and incubated in anaerobic chamber($CO^2$ 10%, $37^{\circ}C$) for 72 hours. Each bacterial colony forming unit(CFU) were counted with naked eyes. From obtained data, we can conclude as follows: 1. There was some changes about anaerobic bacteria and S. mutans count in oral cavity after occlusal stabilization appliance use. 2. The number of anaerobic bacteria was significantly increased at maxillary 2nd molar(P=0.003), maxillary central incisor(P=0.020) after occlusal stabilization appliance use compared with before. 3. Occlusal stabilization appliance use itself had indirect effect to increase the number of anaerobic bacteria at other uncovered opponent tooth site. 4. The number of S. mutans was significantly increased at maxillary 2nd molar(P=0.043), maxillary central incisor (P=0.049) after occlusal stabilization appliance use compared with before. 5. Occlusal stabilization appliance use itself had not any effect on the number of S. mutans at other uncovered opponent tooth site.

• Proceedings of the KIPE Conference
• /
• 2004.07a
• /
• pp.259-259
• /
• 2004

To date, induction motors have mainly been used for heating, ventilation, and air conditioning (HVAC) applications, however, there is significant research being done world-wide on the use of switched reluctance motor(SRM) in household home appliances. This papers proposes three phase SRM for the air-conditioner blower that has cost merit and good performance respectively compared with conventional induction motor.

• The Journal of the Korean dental association
• /
• v.39 no.2 s.381
• /
• pp.143-148
• /
• 2001

In patients with moderate crowding, the use of Pendulum appliance can be considered as one of intra-arch appliances. Its resolves the crowding by moving molars distally in the maxillary arch. The most important advantage of Pendulum appliance does not require patient cooperation at all. In this case we used a Pendulum appliane to resolve anterior crowding with a single-arch treatment in the maxillary arch.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.4
• /
• pp.694-699
• /
• 2001

The prognosis for class III patients in growing child can be made in mixed dentition and the severity of the symptom is often amenable to early intervention. Class III malocclusion can be classified as functional class lit and skeletal origin. Skeletal Class III malocclusion is usually characterized by overdeveloped mandible, underdeveloped maxilla, but the cause of pseudo class III is most dentoalveolar or functional shift of mandible. The primary goal of early intervention of malocclusion is to supply an environment that is conducive to the development of favorable occlusal relationships and avoiding of worsening of the problems. Inverted labial bow appliance is introduced as an appliance to combine the advantage of active plate and activator. It is undemanding with this appliance to initiate not only dentoalveolar expansion of upper dentition but also to orient the functional retrusion of mandible. With simple design the compliance for patients such as mouth breathing problem can be improved. For successful use of this appliance it is utmost important to make accurate and early diagnosis between pseudo- and skeletal class III malocclusion. This article will demonstrate the use of an Inverted labial bow appliance for early treatment of a functional Class III malocclusion. After 4 month treatment, anterior crossbite was treated and the results were achieved mainly dentoalveolar change of upper and lower anterior teeth.

• Proceedings of the KIPE Conference
• /
• 2004.07a
• /
• pp.195-195
• /
• 2004

Conventional dryer systems use one induction motor to drive drum and fan. However, nowadays, dryer systems are necessary to use extra fan motor for reducing a drying-time. This fan motor should be variable-speed controlled motor to control drying-time according to the volume of clothes. This paper proposes 3-phase SRM(Switched Reluctance Motor) having 12/8 structure for variable-speed fan motor of dryer system.

• International Journal of Internet, Broadcasting and Communication
• /
• v.15 no.2
• /
• pp.31-38
• /
• 2023

This paper introduces a real-time face swapping system that enables video influencers to swap their faces with arbitrary generated face images of their choice. The system is implemented as a Django-based server that uses a REST request to communicate with the generative model,specifically the pretrained stable diffusion model. Once generated, the generated image is displayed on the front page so that the influencer can decide whether to use the generated face or not, by clicking on the accept button on the front page. If they choose to use it, both their face and the generated face are sent to the landmark extraction module to extract the landmarks, which are then used to swap the faces. To minimize the fluctuation of landmarks over time that can cause instability or jitter in the output, a temporal filtering step is added. Furthermore, to increase the processing speed the system works on a reduced set of the extracted landmarks.

• The Journal of the Korean dental association
• /
• v.54 no.2
• /
• pp.134-141
• /
• 2016

Use of ready-made orthodontic appliance can lead to inefficiencies in the final stages of the orthodontic treatment. Because patients' teeth have anatomic variations, brackets that have been designed to fit on average tooth surface may result in positional discrepancies when leveling and alignment is completed. As a result, additional steps such as rebonding, wire bending and use of auxiliaries may be needed. Even in patients who have normal tooth anatomy and proper tooth size relationships, precise bracket placement is crucial in order to efficiently control the tooth positions. Digital models can provide advantages in clinical orthodontics as virtual tooth setup could be performed, and clinicians can easily visualize the predicted final occlusion. Through this setup model, customized brackets with individualized prescription and archwires that optimally fit with the patients' dental arches can be produced using CAD/CAM technology. Also, the brackets can be accurately placed with an aid of 3D-printed jigs. The purpose of this article is to introduce the commonly used labial and lingual customized orthodontic appliance systems using digital technology.